China factory Speed 2100 Type Toilet Tissue Paper Making Machine Production Line with Best Sales

Product Description

speed 2100 type toilet tissue paper making machine production line

Why choose us

Product Description


There  are many models and different capacity toilet tissue paper machine production line,such as 787/1092/1575/1880/2000
model and so on. The toilet paper rolls making machine  is a set of production line from waste paper
recycled/vigin pulpboard to finished paper,also called: paper tissue making machine jumbo roll machine toilet paper making
machine tissue roll plant.

Detailed Photos


Product Name

speed 2100 type toilet tissue paper making machine production line

Paper Machine Model 






Outpaper width(mm)












Machine Capacity(T/D)






Cylinder mold specification(mm)

φ 700*1100

 φ1000- 1250*1450




Dryer specification(mm)






Work speed(m/min)






 Raw material

Waste paper ;Virgin Pulp Board;Waste paper &Vigin Pulp Board Mixed

Output paper style

Jumbo Roll Paper

Paper weight


Drive mode

Reduce drive(250type reducer)


12 months

Time of delivery


Click Here To Get Inquiry

Raw Materials
The following raw materials is made into paper pulp with paper pulp equipments (such as hydrapulper etc.) ,then paper pulp is
made into paper with tissue paper machine.
Final Paper Product
The machine can make the paper pulp into these final paper product:

Purchase guide

In order to provide better service,plz let me know your detailed requirements for tissue paper machine    

                   <> For final paper,which step will you start to procuce?

Type Name Detailed Requirements List
Type A From step 1–Papermaking 1. What machine capacity do you want (ton/day)
2.What jumbo roll paper width do you want ?(mm)
3.What boiler type do you want (coal,gas,feul boiler )
Type B From Step 4–Paperprocessing 0.Jumbo roll paper width do you use?(mm) 

                                                                                   → Click Here To Get More ←

           <> What final paper do you want?
NO. Name Detailed Requirements  List
Line 01 Toilet paper 0.You want toilet paper with tube or without tube? 
Line 02 Facial Tissue 1.What facial tissue size do you want?  2.Soft  facial tissue or box tissue
Line 03

Napkin paper 

1.Napkin paper unfolded size you need  2.need or color printing or not?
Line 04 Handkerchief paper 0.Handkerchief paper size

                                             → Click Here To Get More ←

Packaging & Shipping


Egg tray machine will be packaged according to their shapes, weight, transport distance and transport modes . 

01-The dryer is packed with wood chips for protecting its surface
02- The large diameter roll is packed with wood chips.
03- The steel rolls are packed with plastic film and straw ropes.
04- Electric control cabinet is packed with three-ply board box.
05- Some parts are nude cargo. 

Company Profile

Company Profile

 HangZhou Shunfu Paper Making Machinery Co.,Ltd located  in HangZhou  city ZheJiang province,China,is a leading professional paper machine manufacturer in China with best quality 
and perfect service&good reputation for 30+ years.
In 2571 year,our second new facotry is built.



Q1:Are you a factory of paper making machine?
A1:Yes,we are.Our factory founded in 1988.Now we have 2 factories.

Q2:What information do you need,if i need to get a quotation from you?
A2:Output paper type;Capacity(tons/24hours);Output paper weight(gram/m2);Raw material

Q3: What’s the payment method?
A3:We can accept T/T,L/C and credit card.

Q4:How long is the guarantee period for paper making machine?
A4: 12 months after the pending operational

Q5:Can I visit your company?    
A5:Yes, you can.Welcome. Our company located in HangZhou city of ZheJiang province. if you take plane,
it will need about 2 hours from HangZhou city, we will pick you up from airport as well as the train station.
We will take you to see our machine running in our chinese clients’ paper mill. welcome you and your team
to visit us at any time!

   LINE 1. If you arrive in ZheJiang , you can take the plane or the high-speed rail to HangZhou ZheJiang ,
  about700kilometers.   We’ll have someone pick you up in HangZhou.
   Line 2. If you arrive in ZheJiang , you can take the plane or the high-speed rail to HangZhou  ZheJiang , about  1000 kilometers. We’ll have someone pick you up in HangZhou.
  LINE 3. If you arrive in HangZhou, you can take the plane or the high-speed rail to HangZhou ZheJiang ,
about 1500kilometers.    We’ll have someone pick you up in HangZhou.
   LINE 4. If you arrive in Yi wu zhengjiang, you can take the plane or the high-speed rail to HangZhou ZheJiang ,       about 900kilometers. We’ll have someone pick you up in HangZhou.

                                             → Click Here To Get More ←

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.


Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.


The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

China factory Speed 2100 Type Toilet Tissue Paper Making Machine Production Line     with Best SalesChina factory Speed 2100 Type Toilet Tissue Paper Making Machine Production Line     with Best Sales