China factory 25*42*2.8mm AX5 25 42 High Limiting Speed Needle Roller Thrust Bearing Used In Automobile Drive Trains wholesaler

Product Description

25*42*2.8mm AX5 25 42 High Limiting Speed Needle Roller Thrust Bearing Used In Automobile Drive Trains



            Machine Tools                                                                           Cars and Light Trucks  

            Trucks, Trailers and Buses                                                      Two and Three Wheelers

Needle roller thrust bearings are fitted with a form-stable cage to reliably retain and CZPT a large number of needle rollers.

Needle roller thrust bearings provide a high degree of stiffness within a minimum axial space.

In applications where the faces of adjacent machine components can serve as raceways, needle roller thrust bearings take up
no more space than a conventional thrust washer.

Needle Roller Thrust Bearings with Washers Specification

Product Name Needle Roller Thrust Bearings with Washers
Shaft Diameter Available for 5 ≤ d ≤ 45 mm
Material Bearing Steel  (GCr15)
Suitable Washers CP Series
Cage Steel
Application Cars and Light Trucks, Trucks, Trailers and Buses,Two and Three Wheelers
Certification ISO 9001:2008
Packing 1.Neutral Packing Bearing  2.Industrial Packing  3.Commercial Packing Bearing  4.Customize
Delivery Time 30 – 45 Days After The Order is Confirmed
Shippment 1.By Sea  2.By Air  3.By Express
Website http://hlimachinery


Model Thrust Washer Boundary Dimensions (mm) Basic Load Rating (KN) Limited Mass
d D B B1 B2 B3 Eb Ea C Co rpm kg
AX5 13 AX3.5 5 13 CP5 13 CP2 5 13 5 13 2.3 3.5 0.8 2 6.3 10.9 2.4 4.56 20000 0.002
AX6 14 AX3.5 6 14 CP6 14 CP2 6 14 6 14 2.3 3.5 0.8 2 7.3 11.9 2.52 5.08 17600 0.002
AX7 15 AX3.5 7 15 CP7 15 CP2 7 15 7 15 2.3 3.5 0.8 2 8.3 12.9 2.84 6.08 17600 0.003
AX8 16 AX3.5 8 16 CP8 16 CP2 8 16 8 16 2.3 3.5 0.8 2 9.3 13.9 2.96 6.64 17600 0.003
AX9 17 AX3.5 9 17 CP9 17 CP2 9 17 9 17 2.3 3.5 0.8 2 10.3 14.9 3.24 7.6 15200 0.004
AX10 22 AX4 10 22 CP10 22 CP2 10 22 10 22 2.8 4 0.8 2 12 18.6 4 8.72 12400 0.007
AX12 26 AX4 12 26 CP12 26 CP2 12 26 12 26 2.8 4 0.8 2 15 22.6 5.52 14.16 10400 0.01
AX13 26 AX4 13 26 CP13 26 CP2 13 26 13 26 2.8 4 0.8 2 15 22.6 5.52 14.16 10400 0.01
AX15 28 AX4 15 28 CP15 28 CP2 15 28 15 28 2.8 4 0.8 2 17 24.6 5.92 16 9200 0.009
AX17 30 AX4 17 30 CP17 30 CP2 17 30 17 30 2.8 4 0.8 2 19 26.6 6.24 17.6 8400 0.01
AX19 32 AX419 32 CP19 32 CP219 32 19 32 2.8 4 0.8 2 21 28.6 6.4 18.64 8000 0.013
AX20 35 AX5 20 35 CP20 35 CP3 20 35 20 35 2.8 5 0.8 3 22 31.6 9.44 31.2 7200 0.018
AX25 42 AX5 25 42 CP25 42 CP3 25 42 25 42 2.8 5 0.8 3 27.7 37.4 10.64 39.2 6000 0.571
AX27 44   CP27 44   27 44 2.8   0.8   30 39.6 10.96 41.6 5760  
AX30 47 AX5 30 47 CP30 47 CP3 30 47 30 47 2.8 5 0.8 3 32.7 42.4 11.6 45.6 5200 0.571
AX35 52 AX5 35 52 CP35 52 CP3 35 52 35 52 2.8 5 0.8 3 37.2 49 15.12 67.2 4400 0.035
AX35 53 AX5 35 53 CP35 53 CP3 35 53 35 53 2.8 5 0.8 3 37.2 49 15.12 67.2 4400 0.036
AX40 60 AX5 40 60 CP40 60 CP3 40 60 40 60 2.8 5 0.8 3 43 54.9 16.32 76.8 4000 0.046
AX45 65 AX5 45 65 CP45 65 CP3 45 65 45 65 2.8 5 0.8 3 48 59.9 17.44 87.2 3600 0.05


                                                                   About Us

HENGLI Machinery Company is a well-established Chinese bearing supplier. We design, manufacture and wholesale bearings.
Our specialized manufacturer of Spherical Roller Bearing Cylindrical Roller Bearing, XIHU (WEST LAKE) DIS. Rolling Bearing Co., Ltd was
established in 1970 and is accredited by the Chinese Ministry of Machine Building.

We invested in 2 additional specialized bearing factories, which allow us to provide our clients with top of the line products such as 
Needle Roller Bearings, Cam Follower Bearings, Thrust Bearings, Spherical Plain Bearings, Rod Ends Bearings, Ball Joint
Bearings, Tapered Roller Bearings, 
Wheel Hub Bearings and Non-Standard Bearings.

Q1 – What is our advantages?

     A    – Manufacturer – Do it only with the Best;

            -Your Choice make different. 

Q2 – Our Products

 A   – Spherical Roller Bearing, Cylindrical Roller Bearing, Needle Roller Bearing, Cam Followers, Thrust Bearing

      – Spherical Plain Bearing, Rod End, Ball Joint, Wheel Hub, Tapered Roller Bearing

Q3 – Process of our production

 A – Heat Treatment – Grinding – Parts Inspection – Assembly – Final Inspection – Packing

Q4 – How to customize bearing(non-standard) from your company?

 A -We offer OEM,Customized(Non-standard) service and you need to provide drawing and detailed Technical Data.

Q5 –   What should I care before installation?

 A   – Normally, the preservative with which new bearings are coated before leaving the factory does not need to be

        removed; it is only necessary to wipe off the outside cylin­drical surface and bore, if the grease is not compatible

        with the preservative, it is necessary to wash and carefully dry the bearing.

      -Bearings should be installed in a dry, dust-free room away from metal working or other machines producing

        swarf and dust.

Q6 – How to stock and maintenance my bearings right? 

 A   – Do not store bearings directly on concrete floors, where water can condense and collect on the bearing;

      -Store the bearings on a pallet or shelf, in an area where the bearings will not be subjected to high humidity

       or sudden and severe temperature changes that may result in condensation forming;

      -Always put oiled paper or, if not available, plastic sheets between rollers and cup races of tapered roller bearings.


How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.


Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.


The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

China factory 25*42*2.8mm AX5 25 42 High Limiting Speed Needle Roller Thrust Bearing Used In Automobile Drive Trains     wholesaler China factory 25*42*2.8mm AX5 25 42 High Limiting Speed Needle Roller Thrust Bearing Used In Automobile Drive Trains     wholesaler