Product Description
Product Description
A trailer axle is an essential component that connects the trailer wheels to the vehicle’s chassis. The axle’s primary function is to transfer the load from the trailer to the wheels and ultimately to the road surface.
Axles are designed with specific load capacity and are selected based on the weight of the trailer and the expected load. There are different types of axles available, including single, tandem, and tri-axle configurations, with each designed to support a varying amount of weight.
Axle alignment is critical to ensure proper handling and safe operation of the trailer. Factors such as suspension type, brake configuration, and tire size must also be considered when selecting and configuring the trailer axle.
Proper maintenance of the axle, including lubrication, inspection, and alignment checks, is crucial to ensure safe and reliable operation of the trailer.
| Axle Type | L4 | Wheer Fixing | Bearing | ||||||||||
| Max | L2 | L3 | GM Center | Studs | L1 | Rimis | Axle | ||||||
| Capacity | Track | Brake Size | Center | Axle Tube | Distance | D1 | D2 | Total | Recommended | Weight | |||
| (T) | (mm) | (mm) | Distance of | (mm) | of Brake | P.C.D. | Hole | Length | to use | (kg) | |||
| Spring Seat | Chamber | (mm) | Diameter | (mm) | |||||||||
| (mm) | (mm) | (mm) | |||||||||||
| CK12FB03G1DE | 12 | 1840 | ∈420×180 | ≥940 | 150x150x12 | 440 | 10-M22x1.5 | 335 | 281 | 2172 | 7.5V-20 | 380 | (Ouer)33213(lnner)33118 |
| CK13FB03G2DE | 13 | 1840 | ∈420×200 | ≥940 | 150x150x12 | 375 | 10-M22x1.5 | 335 | 281 | 2170 | 7.5V-20 | 381 | |
| CK14FB03G2FG | 14 | 1860 | ∈420×200 | ≥950 | 150x150x14 | 380 | 10-M22x1.5 | 335 | 281 | 2222 | 8.00V-20 | 412 | (Outer)33215 dnneri32219 |
| CK16FB0GG2HI | 16 | 1860 | ∈420×200 | ≥950 | 150x150x16 | 380 | 10-M22x1.5 | 335 | 281 | 2293 | 8.50V-20 | 439 | (Outer)32314(lnner)32222 |
| CK18FBC3GHI | 18 | 1860 | ∈420×220 | ≥950 | 150x150x18 | 380 | 10-M22x1.5 | 335 | 281 | 2293 | 8.50V-20 | 454 | (Outer)32314(lnner)32222 |
1. One-piece shaft tube, high strength, comfortable appearance.
2. Compared with other axles of the same load, it is light in weight and low in price.
3. Using non-asbestos friction plate, more environmentally friendly.
4. Adopting international general specifications, maintenance is convenient, fast and low cost.
|
Product Name |
Trailer Rear Axle |
|
Type |
American drum type |
|
Capacity |
13T, 15T, 16T, 20T |
|
Total Length |
About 2200 mm (According to the model) |
|
Weight |
About 380 KG (According to the model) |
|
Material |
Iron |
|
Color |
Black |
|
Package |
Carton, wooden box |
|
Quality |
Super |
|
Port |
China Port |
|
Payment |
T/T, L/C, D/P, D/A, MoneyGram, Credit Card, PayPal, Western Union |
|
Service |
OEM, ODM |
Accessories
It adopts high-quality accessories from major brands at home and abroad, and global standard American
axle specifications. It has strong practicability, low price and convenient maintenance.
Axle
The factory produces its own shaft tube with quality assurance and cost advantage. The assembly process
strictly abides by international quality standards to create high-quality products.
Recommended Products
Company Profile
Nanou Company Co., Ltd. is a special trailer manufacturer located in Quanpu Industrial Park, Xihu (West Lake) Dis., ZheJiang Province.
The company is located in the famous Water Marginh hometown, east of ZheJiang -HangZhou Grand Canal, west of ZheJiang -Kowloon Railway, south of HangZhou, the hometown of peony, north of Yellow River, near the exit of National Highway 220 Jinhe Expressway, with convenient transportation and pleasant scenery.
We are the full-size Modified Truck enterprise which integrates the design of product, scientific research developing, production and sale together, possessing subsidiary companies of automobile production, automobile trade and automobile fittings production, etc. Our leading products include “Nanou” brand semi-trailers, tipper, fuel tanker, particle material tanker, bulk cement tanker, concrete mixer truck, wrecker trucks, LNG, CNG, and other special vehicles.
We strictly adhere to the service idea of customer centricity and customer satisfaction, so as to provide customers with better and faster CZPT service.
Over the years, we have always adhered to the business strategy of “innovation, development” and the concept of “quality is the life of the enterprise, talent is the foundation of the enterprise, customer is the god of the enterprise, management is the soul of the enterprise”.
Now, Nanou trailers are widely exported to most Africa market (such as Algeria, Zimbabwe, Ethiopia, Kenya, Nigeria, Sudan, Malawi, Tanzania, Cameroon, Ghana, Qatar)and Dubai, Saudi Arabia, Iran, Malaysia, Philippines, Vietnam, Pakistan, Russia, and Central& South America market.
If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.
We are looking forward to forming successful business relationships with new clients around the world in the near future.
WHY CHOOSE US?
1. Advanced equipment, the use of precision CNC spinning machine automatic molding, surface spiral marks uniform, beautiful, shape in line with Europe, the United States popular style, with good “dynamic balance” performance.
2. Our company has 7 rim production lines, including 4 steel rim production lines and 3 tubeless rim production lines. Tubeless rim forming, using slagging, rolling and end cutting 3 processes independently completed. On-line test tire mounting surface size, to ensure the quality of the rim. Rim gas seal checked.
3. Our company has 5 wheel assembly lines, which can ensure the accuracy of CZPT steel rings through four-point detection device. Assembly welding using the original imported American Lincoln welding machine automatic welding. Make full use of imported German SAXON dynamic balance detection device to realize online full check wheel dynamic balance.
4. The company has 3 coating production lines, which carry out automatic oil removal and rust removal on the surface of the steel ring, and cover the outer layer with dense phosphating film to enhance the corrosion resistance of the coating.
5, the outer coating according to your needs, choose paint coating or powder coating. PPG coating is selected for paint coating, and Wagna spraying system of the world famous brand is selected for powder coating equipment. Valspar brand is selected for powder coating. The finished wheel is regularly tested by salt spray test for 720 hours. Coating quality to reach the international first-class level.
Packaging & Shipping
FAQ
A. What are our advantages compared with other manufacturers
- Competive Price – We work as the leading dealers of various leading China Semi Trailers manufacturers/factories.From numerous comparison and feedback from clients, our price is more competitive than manufacturers/factories.
- Quick Response – Our team is consisted of a group of diligent and enterprising people, working 24/7 to respond client inquiries and questions all the time. Most problems can be solved within 12 hours.
- Fast Delivery – Normally it will take more than 25-45 days for manufacturers/ factories to produce the ordered trailers, while we have a variety of resources, locally and nation widely, to receive trailers in timely manner. In 80% circumstance, we can have a 15-20 days delivery of regular trailers for our clients.
- High Quality – Every process of choose material ,welding ,sand blasting,painting with detailed inspection,accept 100% inspection during production and after production.
B. Which payment terms can we accept?
- Normally we can work on T/T term or L/C term.
- On T/T term, 30% down payment is required in advance, 70% balance shall be settled before delivery, or against the copy of original B/L for regular client.
- On L/C term, normally need 30% down payment by T/T, 70% by L/C at sight. a 100% irrevocable L/C without “soft clauses” can be accepted sometimes. Please seek the advice from the individual sales manager whom you work with.
C. How long will our price be valid?
- Price with long valid time — We are a tender and friendly supplier, never greedy on windfall profit. Basically, our price remains stable through the year. We only adjust our price based on 2 situations: The rate of USD:RMB varies significantly according to the international currency exchange rates. Manufacturers/factories adjusted the trailer price, because of the increasing labor cost and raw material cost.
D. What logistics ways we can work for shipment?
- We can ship all trailer by various transportation tools.
- For 90% of our shipment, we will go by sea, to all main continents such as South America, Middle East, Africa, Oceania etc, either by container or RoRo/Bulk Shipment.
- For neighborhood countries of China, such as Russia, Tajikistan, Kazakhstan,Mongolia etc, we can ship trucks by road or railway.
- For light spare parts in urgent demand, we can ship it by international courier service, such as DHL, TNT, UPS, or Fedex.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | 24h Online |
|---|---|
| Warranty: | 1~2 Years |
| Type: | Axle |
| Certification: | ISO/TS16949, CE |
| Loading Weight: | 15T |
| Color: | Customer Demands |
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Where can I find information on axle load limits for various types of vehicles?
When seeking information on axle load limits for different types of vehicles, there are several reliable sources where you can find the necessary information. Here’s a detailed explanation of where you can find information on axle load limits:
1. Vehicle Owner’s Manual:
The first and most accessible source of information on axle load limits is the vehicle owner’s manual. The owner’s manual provided by the vehicle manufacturer typically includes important details about the vehicle’s specifications, including axle load limits. Look for sections related to vehicle loading, weight distribution, or axle specifications to find the recommended load limits for each axle of your specific vehicle model.
2. Government Transportation Authorities:
Government transportation authorities, such as departments of transportation or road transport authorities, often provide guidelines and regulations regarding vehicle weight limits, including axle load limits. These authorities establish and enforce weight restrictions to ensure road safety and prevent damage to infrastructure. Visit the website of your local or national transportation authority to access relevant regulations or guidelines pertaining to axle load limits for various types of vehicles.
3. Commercial Vehicle Regulations:
If you are specifically interested in axle load limits for commercial vehicles, such as trucks or buses, consult the commercial vehicle regulations applicable in your region. These regulations are established to ensure safe and efficient operation of commercial vehicles on public roads. Regulatory bodies responsible for commercial vehicle operations often provide detailed information on axle load limits, weight distribution requirements, and other related specifications.
4. Vehicle Manufacturer or Dealer:
If you require axle load limit information for a specific vehicle model or variant, contacting the vehicle manufacturer or a local authorized dealer can be helpful. They can provide accurate and up-to-date information specific to your vehicle. Provide them with the vehicle identification number (VIN) or other relevant details to ensure they can assist you accurately.
5. Online Resources and Databases:
There are online resources and databases dedicated to providing information on vehicle specifications, including axle load limits. These resources may include vehicle data websites, forums, or government databases that compile and provide access to vehicle specifications and regulatory information. Conduct an internet search using relevant keywords to find reliable online sources that offer information on axle load limits for various types of vehicles.
When seeking information on axle load limits, it’s crucial to ensure that the information you obtain is accurate, up-to-date, and applicable to your specific vehicle and jurisdiction. Regulations and load limits can vary depending on the country, region, vehicle type, and other factors. Therefore, it is advisable to consult official sources or seek professional advice to ensure compliance with applicable regulations and ensure safe and legal operation of your vehicle.
Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?
Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:
- Regular Inspection:
- Lubrication:
- Seal Inspection and Replacement:
- Proper Loading and Towing:
- Driving Techniques:
- Regular Wheel Alignment:
- Proper Tire Inflation:
- Service Intervals:
Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.
Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.
Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.
Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.
Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.
Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.
Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.
Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.
It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.
Are there aftermarket axles available for upgrading performance in off-road vehicles?
Yes, there are aftermarket axles available for upgrading performance in off-road vehicles. Off-road enthusiasts often seek aftermarket axle options to enhance the durability, strength, and performance of their vehicles in rugged and demanding terrains. Here’s some information about aftermarket axles for off-road applications:
1. Upgraded Axle Materials:
Aftermarket axles are typically made from high-strength materials such as chromoly steel or forged alloys. These materials offer superior strength and durability compared to stock axles, making them better suited for off-road use where extreme loads, impacts, and torsional forces are encountered.
2. Increased Axle Shaft Diameter:
Some aftermarket axles feature larger diameter shafts compared to stock axles. This increased diameter helps improve the axle’s load-carrying capacity and resistance to bending or torsion. It can also enhance the overall durability and reliability of the axle in off-road conditions.
3. Upgraded Axle Splines:
Axles with upgraded splines are designed to handle higher torque loads. Aftermarket axles may feature larger and stronger splines, providing increased power transfer capabilities and reducing the risk of spline failure, which can occur in extreme off-road situations.
4. Locking Differentials:
Some aftermarket axle options include integrated locking differentials. Locking differentials improve off-road traction by mechanically locking both wheels on an axle together, ensuring that power is distributed evenly to both wheels. This feature can be advantageous in challenging off-road conditions where maximum traction is required.
5. Lifted Vehicle Compatibility:
Aftermarket axles are often designed to accommodate lifted vehicles. Lift kits that raise the suspension height can impact the axle’s operating angles. Aftermarket axles may offer increased articulation or modified geometry to maintain proper alignment and reduce the risk of binding or premature wear.
When considering aftermarket axles for off-road vehicles, it’s essential to choose options that are compatible with your specific vehicle make, model, and suspension setup. Working with reputable manufacturers, consulting with experienced off-road enthusiasts, or seeking advice from professional mechanics can help you select the most suitable aftermarket axle upgrades for your off-road needs.
Lastly, it’s important to keep in mind that upgrading axles alone may not be sufficient for maximizing off-road performance. Other components such as suspension, tires, differential gears, and drivetrain systems should be considered as part of a comprehensive off-road build to ensure optimal performance, reliability, and safety.
editor by CX 2024-02-09
China 3GD-25311-11-35 ATV Rear Axle Bearing Carrier For YAMAHA YFM 350X 3GD-25311-10-35 electric rear axle kit
Product Amount: 3GD-25311-eleven-35
Content: Aluminum
Certification: ISO/TS16949
Top quality: Standard Good quality, LCM0820 Tiny Dc Motors Coin Variety Vibration Motor of Mobile Telephone Vibrator 3v Substantial Velocity Dc Motor precision higher-speed bearings with reduced draw
USE FOR: ATV/UTV/snow cell
Guarantee: 12 Months
Packing: Foam packing, RG sequence gearbox for tractor pto Carton packing
Description: higher performance
OEM: 3GD-25311-10-35 3GD-25311-eleven-35
Packaging Information: Packing:Common & Powerful Packing by air / sea Poly bag + Box + carton + Pallet Can be with our brand packing, bearing ceramic 6802 ZrO2 entire ceramic bearings 61802 15x24x5 mm or OEM with your brand name
Port: HangZhou ZheJiang
| Product | ATV bearing carrier |
| OEM No. | 3GD-25311-ten-35 3GD-25311-11-35 |
| Use for: | ATV/UTV/snow mobile |
| Suit for: | YAMAHA CZPT 350X |
| Content: | Gcr15 |
| Certification | ISO/TS16949 |
Packing:Regular & Gcr15 Blended loading 32218 Solitary Row Taper Roller Bearing Sturdy Packing by air / sea
Poly bag + Box + carton + Pallet
Can be with our model packing, or OEM with your manufacturer and layout
The Different Types of Axles
An axle is the central shaft of a gear or wheel. Axles are either fixed to the wheels or fixed to the vehicle. In some cases, they rotate together with the wheels and vehicle. The axle may also include bearings and mounting points. There are many types of axles, and it is important to understand the difference between each type.
Transaxle
The transaxle is the single mechanical device that combines the functions of a car’s differential, axle and transmission. It’s produced in manual and automatic models. A manual version is the preferred one for everyday driving, while an automatic one is more efficient in preventing vehicle damage. Here are some basics about the transaxle.
Transaxles are essential components of a car’s drivetrain, and any problems can cause major damage and leave the driver stranded. Transaxles include the transmission and the differential, which transfer the engine’s power to the wheels. Taking the time to check the transaxle is important to ensure that everything is functioning properly.
The transaxle is a very complex machine that combines the functions of the final drive and the transmission into one compact unit. The transaxle is a very versatile piece of automotive technology, and is an essential component of a front-wheel-drive car. In addition to conventional front-wheel-drive vehicles, many modern rear-wheel-drive vehicles use a transaxle to provide more even weight distribution.
The first American car to use a transaxle was the Cord 810 in the early 1920s. It was well ahead of its time, but was unsuccessful. For many years, the front-wheel drive automobile was absent from the United States automotive scene. It wasn’t until the 1960s that a front-wheel drive automobile re-emerged. A front-wheel-drive automobile, known as a transaxle, was the first to reach the market, and it’s not the only car to use this gearing.
A transaxle is a good option for vehicles with an extreme amount of torque. This system can handle powerful engine designs while keeping weight in the engine bay. It is not a perfect solution for all vehicles, however. In some vehicles, the extra weight added to the engine bay will affect the performance. The added weight will reduce traction. In addition, a transaxle mounts behind the engine, which adds weight to the rear.
Transaxles are the primary part of vehicles that have front-wheel drive. Their purpose is to transmit power from the engine to the drive wheels. The front-wheel-drive assembly had 2 short axles with complicated ball joints.
Full-floating axle
A full-floating axle is different from a semi-floating axle in several ways. A semi-floating axle is used for rear wheel drive cars, where it has a bearing mounted in the axle shaft. This axle supports the vehicle’s weight and transmits the drive torque from the transmission to the wheels. However, a semi-floating axle’s load capacity is limited by the size of the axle bearing. A full-floating axle, on the other hand, has the bearing mounted on the outside of the axle tube. The bearing is the only part of the axle that supports the vehicle, and the hub and bearing assembly are held together by a large nut.
The drive axle on a full-floating axle is splined at both ends so that it can easily be removed from the rear of a vehicle without removing the wheel. This type of axle makes it possible to change gears quickly and easily. Because of this, it’s not necessary to remove the wheels and tires in order to replace the axle. Instead, a common tool used to remove the axle from the wheel hub is an axle wrench.
Full-floating axles are more common in heavy-duty vehicles. The ability to carry heavy loads without causing the axle to break is a big advantage to full-floating axles. These axles require less maintenance and require less bends than traditional axles and may even be worth the extra investment if you have a heavy load to carry.
A full-floating axle allows the driver to change a broken axle shaft without having to remove the entire wheel. A full-floating axle will also allow the driver to remove the axle shaft without having to take off the wheel. Full-floating axles are also more durable than semi-floaters, which have weight resting on the axle tubes and housing.
While a full-floating axle is more expensive to manufacture, it is better for heavier vehicles that carry heavy loads. It is better to choose a full-floating axle if you have a heavy load or plan on towing.
Three-quarter floater
A three-quarter floating axle is a type of floating axle that’s a compromise between the full and semi-floating types. Its bearings are located on the axle casing rather than on the hub, which means that it’s less susceptible to axle breakdown. However, it’s not as robust as a full floating axle.
This design combines the benefits of fully-floating axles with the simplicity of a semi-floating axle. Instead of having multiple wheel bearings, a single wheel bearing is installed in the center of the hub. The hub is then keyed rigidly to the axle shaft, providing a connecting connection and maintaining wheel alignment.
While a full-floating axle is the most common style of truck axle, you may see the three-quarter floater on the side of a pickup. It was common for 3/4-ton Gms to use these axles until the 1980s. Dodge and Ford also used a semi-float axle called a Dana 60. The difference between the two types of axles is the amount of support provided by the axleshaft and hub, and the number of lug nuts on the axleshaft and hub are different.
The three-quarter floater axle drive assembly of the present invention is illustrated in FIG. 1. The axle housing comprises an elongated axle tube 12, a hub member 30, and a hub shaft 16. A hub member 30 is rotatably supported on the axle tube 12 by an anti-friction bearing assembly 42. The axle shaft is retained in place by a domed plate 26.
This axle design has two main advantages. First, it transfers the weight of the vehicle to the axle casing. It also helps transfer the driving torque and side thrust to the wheel. This type of axle also has a differential cross shaft, which limits inward axial movement of the axle shaft.
Dead axle
A Dead axle is a structural component that supports the rear wheel of a vehicle. It can either be straight or angled and is located behind the drive axle. Depending on the vehicle, the dead axle may be steerable. Tag axles are also common on agricultural equipment and certain heavy construction machinery. They are also known as lazy axles because they only contact the ground when a vehicle is carrying a significant load, thus saving tire wear. Dead axles may be rigid or flexible.
Some rear dead axles can also be configured as an air tank. The air is taken in and out of the rear dead axle through the port portions of the rear axle. This can reduce the size of the air tank. For this reason, it is a preferred design for rear dead axles. While most vehicles are equipped with two axles, the rear axle can be used to accommodate cargo.
FIG. 1 is a schematic plan view of a vehicle with two rear axles. The front axle is called the drive axle and the rear dead axle is called the dead axle. These components are located on a truck body frame. There are also battery and fuel tanks. They are used to distribute driving force from the front to rear wheels.
An axle is a crucial component of a vehicle. It transfers power from the engine to the wheels. A live axle is connected to the drive shaft and transmission, while a dead axle receives no direct power. This is the main difference between a live and dead axle. Although a dead axle is not as useful as a live one, it is still essential to understand what drives a car.
Dead axles are used in many vehicles for different purposes. Many large trucks are fitted with several of them for load bearing purposes. They also help distribute weight.
editor by czh 2023-02-28
China American Type Axle 16t Fuwa Axle axle bearing
Product Description
Trailer areas American variety 16t semi trailer axle
| Axle-Inboard Drum Series Specifications | |||||||||||||
| Axle Sort | Max. Potential(T) |
Track (mm) |
Brake(mm) | Bearing | (Spring Seat Installation) |
Axle Beam (mm) |
Centre Length Of Brake Chamber(mm) |
Wheel Repairing | Total Duration (mm) |
Recommended Wheel |
Axle Fat (kg) |
||
| Stud | P.C.D(mm) | H(mm) | |||||||||||
| JSS13F1B10 | thirteen | 2420 | φ420×180 | HM518445/ten | ≥ 1510 | a hundred and fifty |
787 |
10×M22×1.5 ISO |
335 |
280.8 |
~ 2526 |
seven.5V-twenty |
380 |
Notice:
1. Track length L2 is optional
two. Available with Ab muscles system
3. Automatic slack adjuster is optional
ZheJiang CZPT Axle Production Co., Ltd., founded in 2000, is a specialist producer of trailer axle assemblies, semi-trailer suspension programs and correlative fittings in China. We are positioned in Quanpu Industry Zone which is the biggest creation base of trailers in China, in Xihu (West Lake) Dis., the renowned scenic spot. We are 1 of specialised enterprises in the scientific research, design and style, production and sale, with a lot more than 300 competent workers and professional designers for distinct places. We undertake the domestic and global complex requirements in creation, correctly grasp the info of the marketplace demand from customers and make fast and optimal designs. In this way, our axle, suspension and other fittings have the world-class technological high quality by means of sensible and innovative manufacture systems. Our sophisticated processing technologies, first-class manufacturing line and precision CNC machining equipment from property and overseas make sure the very good top quality of our semi-trailer axle assemblies, suspension techniques and other correlative fittings. At the very same time, our once-a-year potential for the export of American and German semi-trailer axle assemblies has attained sixty, 000 parts and of suspension assemblies has reached fifty, 000 sets. We acquired the ISO9001: 2000 Intercontinental Top quality Management Program Certification in 2003 and TS16949 Certification in 2007. “Initial-course merchandise good quality, the meticulous and thoughtful support, and CZPT cooperation” is the philosophy that we constantly cherish. We not only satisfy the domestic market demand, but also export our goods to Southeast Asia, the Middle East, Latin The united states and other international locations, enjoying a excellent popularity. We often regard top quality as lifestyle, and consumer as God. We will generate a excellent tomorrow with your honest cooperation and assistance.one. What’s your advantage?
First we are company, we personal professinal technologies & good quality handle team superb group for international trade additionally a rich expertise in trading.
2. What types of mainly items do you manufacture?
We are a skilled company of trailer axle assemblies, semi-trailer suspension methods and correlative fittings in China.
3. Can you send out me samples for testing?
Certainly! We’d like to offer the samples free of charge, but for the freight, pls kindly bear it.
four. How lengthy do you complete a mew merchandise?
Usually 20~35days after all information verified.
|
US $500-680 / Piece | |
2 Pieces (Min. Order) |
###
| After-sales Service: | 24 Hours Online |
|---|---|
| Condition: | New |
| Axle Number: | 2 |
| Application: | Trailer |
| Certification: | CE, ISO |
| Material: | Iron |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Axle-Inboard Drum Series Specifications | |||||||||||||
| Axle Type | Max. Capacity(T) |
Track (mm) |
Brake(mm) | Bearing | (Spring Seat Installation) |
Axle Beam (mm) |
Centre Distance Of Brake Chamber(mm) |
Wheel Fixing | Total Length (mm) |
Recommended Wheel |
Axle Weight (kg) |
||
| Stud | P.C.D(mm) | H(mm) | |||||||||||
| JSS13F1B10 | 13 | 2420 | φ420×180 | HM518445/10 | ≥ 1510 | 150 |
787 |
10×M22×1.5 ISO |
335 |
280.8 |
~ 2526 |
7.5V-20 |
380 |
|
US $500-680 / Piece | |
2 Pieces (Min. Order) |
###
| After-sales Service: | 24 Hours Online |
|---|---|
| Condition: | New |
| Axle Number: | 2 |
| Application: | Trailer |
| Certification: | CE, ISO |
| Material: | Iron |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Axle-Inboard Drum Series Specifications | |||||||||||||
| Axle Type | Max. Capacity(T) |
Track (mm) |
Brake(mm) | Bearing | (Spring Seat Installation) |
Axle Beam (mm) |
Centre Distance Of Brake Chamber(mm) |
Wheel Fixing | Total Length (mm) |
Recommended Wheel |
Axle Weight (kg) |
||
| Stud | P.C.D(mm) | H(mm) | |||||||||||
| JSS13F1B10 | 13 | 2420 | φ420×180 | HM518445/10 | ≥ 1510 | 150 |
787 |
10×M22×1.5 ISO |
335 |
280.8 |
~ 2526 |
7.5V-20 |
380 |
How to Repair an Axle
An axle is the central shaft of a gear or wheel. The axle can be fixed to the wheels or the vehicle itself and rotates along with them. The axle may include bearings. This article discusses the different types and their functions. It also covers how to repair an axle. In addition to its function, an axle may include mounting points and bearings.
Structure
An axle is a part of railway machinery that helps move trains. It is made up of a cylinder and a system of springs. The axle is positioned near the center of the train’s wheels and is connected to the frame and wagon. Axle box bogies are used in economic trains.
Axles can be integral or detached, depending on the type of vehicle. An integral axle is the central part of the suspension system and supports the weight of the vehicle. A disengaged axle has two wheels on opposite sides. In a vehicle with independent suspension, the axles are matched together with independent suspension. Different types of axles are designed for different purposes, so it’s important to understand which type of axle is used for the vehicle you’re driving.
A conventional axle assembly consists of the hub assembly 10, brake disk 20, wheel bearing assembly 30, and knuckle 40. It also has a hub bolt 14. The wheel bearing assembly 30 is made up of the bearing 32, outer ring 36, and bearing connecting bolt 38. The wheel bearing assembly is connected to the hub using a hub.
The type of axle used in a vehicle is determined by the type of driving force that the axle is expected to deliver. Some vehicles use standard axles while others have custom-made axles to meet their specifications. This allows for better control over the wheels’ speed and torque. These differences can greatly affect the performance of your vehicle.
Full-floating axles are most common in light, medium, and heavy-duty trucks. These axles can handle more weight than their semi-floating counterparts. They also prevent the wheel from coming off in case of axle failure. Full-floating axles are used in some Land-Rover vehicles and are used in American stock car racing. In addition, full-floating axles help maintain wheel alignment and handle side thrust and driving torque.
The structure of an axle assembly comprises an input shaft, a brake disk, and the hub. The input shaft is connected to the drive pulley.
Function
Axle springs are used to support the axle. The spring rate depends on the amount of load applied to the axle. The position of the axle can be determined by detecting signals produced by a position sensor. The sensor detects a change in distance between the axle body and the chassis. The spring rate is then adjusted to provide the required level of deflection.
The differential between the spring supported and unsprung axle suspension can lead to dangerous operating conditions. An operator may not always be aware of the occurrence of a switch from spring-supported to unsprung condition, and may overtax the vehicle as a result. Thus, the proper operation of axles depends on a thorough understanding of axle functions.
The Michigan DOT study used mechanistic models and laboratory studies to develop axle factors. These factors describe the relative damage caused by a single distress to a standard axle. They were used to adjust the AASHTO-based LEFs for single axle weights and to derive new LEFs independent of ESALs.
Models for estimating service lives are based on the work of Timm et al. for the FHWA. These models assume accurate axle loading spectra and a small number of tightly defined scenarios. This greatly simplifies the task of estimating LEFs and improves the accuracy of results.
The MEPDG version of the model supports the NAPCOM and PaveDAT models. They show a considerable variation in the effects of different axle weights on various metrics of pavement condition. This is because different axle weights can cause different results in different sections, if they are associated with two failure mechanisms.
Types
There are many different types of axles, each with their own characteristics. The most common of these is the Ford 9-inch axle, which is found in most Blue Oval muscle cars and trucks. It is so popular that aftermarket companies even make versions for Chevy applications. This particular type of axle features a 3/8-inch square-drive fill plug and is reinforced with a Daytona-style pinion cartridge, which accommodates a stronger pinion head bearing and thicker inner ribbing.
Another type of axle is the rigid front axle, which uses leaf springs to provide suspension. These springs are fixed to spring seats on the axle beam. The axle beam and track rod are connected to each other using screws. The length and thickness of the axle tubes are important for the strength and performance of the axle.
The rear axle is responsible for transferring power to the driving wheels. The front axle, on the other hand, is responsible for processing road shocks and steering. The driving torque produces thrust in the wheels. This force must be transmitted to the chassis frame and body to move the vehicle. These are the most affordable types of axles, but they can also lead to problems.
While many axles are manufactured in standard formats, many of them are custom-made for a particular car, allowing for a more individualized look and performance. In addition to being custom-made for the vehicle, axle housing cases can be either a single unit or split like a banjo. The front opening of the axle housing is closed by a differential carrier, while the rear opening is covered by a spherical cover plate.
Different types of axles have different strengths and weaknesses. Typically, the weight of an axle should be proportionate to the vehicle’s weight and the pressure it will exert on the road. When the axle weight is higher, a vehicle will not be as efficient, as it will use more fuel to move at the same speed. This can cut into profit margins.
Different types of axles can have various purposes, but one main function is to transfer power from the engine to the wheels. These axles need to be durable and able to withstand the weight of a vehicle, as well as withstand accelerated forces.
Repair
If you notice any signs of wear or damage to the axle on your vehicle, you may need to repair it. This type of repair will not only protect the wheels, but will also increase the overall performance of your car. A good repair job can help you enjoy smoother driving and better control of your tires. However, there are certain precautions you must take before starting the repair.
To fix an axle, a mechanic must first determine the cause of the problem. This can involve replacing worn or broken parts, replacing them with new ones, and adjusting the car’s alignment. The mechanic will then tighten the fasteners and tires according to manufacturer specifications. Finally, the car will be road tested to ensure that everything is working properly.
A CV joint is also a common item to be replaced. The lubrication in these joints can become dirty, which causes them to wear out. A failing joint will make a clicking sound when it turns sharply. A failed joint may also affect the differential. This part of the car’s drivetrain contains a set of gears that transfer the rotational power of the engine to the wheels. Over time, the gears can wear out, resulting in high labour and replacement costs.
If your car has bent axles, it is important to repair them as soon as possible. Even if the damage is slight, the problem can lead to additional damage to your car’s wheels, CV joints, or other powertrain components. Thankfully, some insurance policies cover the cost of axle repair after an accident.
The average cost to repair an axle varies from about $450 to $900 before taxes. The cost depends on the size of the vehicle and the type of labor required. A rear axle repair can cost up to $700. In addition to labor fees, parts can cost as little as $50 to 70. The cost of the repair can also vary depending on the type of vehicle and the parts used.
If you notice bad vibrations in your vehicle, it’s likely that the axle has been damaged. These vibrations can cause problems with the handling of your vehicle and your comfort while driving.
editor by czh 2023-01-05
China Hot Forged 40cr 42CrMo4 Steel Rail Wheel Shaft Forging Axles axle bearing
Solution Description
MaHangZhou CZPT Technologies Co., Ltd. has the capacity to ensure the good quality for every action, from raw content (forging), then heating treatment, ultimately machining. We have our possess forging mill, heating teatment store and machining shop. At present we could provide a variety of of lage main axles and shaft, turbin shaft, cylinder shaft, windy generator shaft, roller shaft, wheel forging, drill little bit forging and kinds of irregular elements based on the drawing presented by buyers.
Metal materials for shaft and forging areas:
| Engineering Steel | |||||
| GB GB/T seven-hundred |
JIS JIS G3101 |
DIN (W-Nr.) EN10571-2 / DIN17100 |
AISI/ASTM ASTM A36 |
BS | Others |
| Q235B | SS400 | S235JR / RST37-2 | A36 | ||
| Q235C | S235J0 / ST37-3 U | ||||
| Q235D | S235J2 | ||||
| GB GB/T1591 |
JIS | DIN (W-Nr.) EN10571-2 / DIN17100 |
AISI/ASTM | BS | Other people |
| Q355B | S355JR | ||||
| Q355C | S355J0 / ST52-3U | ||||
| Q355D | S355J2 / ST52-3 N | ||||
| Q355E | S355K2 | ||||
| GB GB/T 699 |
JIS JIS G4051 |
DIN (W-Nr.) EN 10083-two |
AISI/ASTM ASTM A20 |
BS | Other people |
| 1018 | EN2C | ||||
| twenty | S20C | C20 | 1571 | EN3B/070M20 | ASTM A105 |
| 35 | S35C | C30 | 1035 | ||
| forty five | S45C | C45E/1.1191 | 1045 | EN8D/080M40 | |
| 50 | S50C | C50/1.1206 | 1050 | 080M50 | |
| 55 | S55C | C55 | 1055 | EN9/070M55 | |
| GB GB/T 3077 |
JIS JIS G4105/JIS G4103 |
DIN (W-Nr.) EN 15710 |
AISI/ASTM ASTM A29 |
BS BS 970 |
Other people |
| 40Cr | SCr440 | 41Cr4(1.7035) | 5140 | ||
| 15CrMo | SCM415 | 16CrMo44/1.7337 | |||
| 20CrMo | SCM420 | 18CrMo4/1.7243 | 4118 | ||
| 30CrMo | SCM430 | 25CrMo4/1.7218 | 4130 | 708A25/708M25 | |
| 42CrMo | SCM440 | 42crmo4/1.7225 | 4140 | EN19/709M40 | |
| SCM445 | 4145 | ||||
| 40CrNiMoA | SNCM 439/SNCM8 | 36CrNiMo4/1.6511 | 4340 | EN24/817M40 | |
| 40NiMoCr10-5/1.6745 | EN26/826M40 | ||||
| 34CrNiMo6 / 1.6582 | 4337 | ||||
| 30CrNiMo16-6/1.6747 | 4330V | EN30B/835M30 | |||
| 32CrMo12/1.7361 | EN40B/722M24 | ||||
| 16CrMnH / 20CrMnTi | 16MnCr5 / 1.7131 | 5115 | |||
| 20CrMn | 20MnCr5 / 1.7147 | ||||
| 15CrNi6/1.5919 | 3115 | ||||
| 16NiCr4/1.5714 | EN351/637M17 | ||||
| 4615/4617 | EN34/665M17 | ||||
| 14NiCr14/1.5752 | 3310/3415 | EN36/655M13 | |||
| 15NiCrMo16-5/1.6723 | EN39/835M15 | ||||
| 17CrNiMo6 | 18CrNiMo7-6 (1.6587) | 4815 | |||
| 20CrNiMo | SNCM220 | 1.6523/21NiCrMo2 | 8620 | 805M20 | |
| 20CrNiMo5 | EN353 | ||||
| GCr15 | SUJ2 | 52100/1.3505 | EN31/535A99 | ||
| 38CrMoAl | SACM645 | 41CrAlMo7/34CrAlMo5 | 905M39/905M31 | 41CrAlMo74(ISO) | |
Scorching Solid 40cr 42CrMo4 25crmo4 Metal Rail Wheel Axle Forging Forging Axles
We King Rail were previously engaged in exporting steel railway wheels , axles ,bearings and other forging items for about 12 years, supplies are a great range of sizzling solid, hot rolled and cold drawn Steels, including engineering metal, cold perform tool steel, scorching perform tool metal, plastic mildew steel, spring steel, high pace steel, stainless metal and so on., besides King Rail also has their possess heating remedy shop and machining shop to offer heating therapy, cutting and additional machining provider.
Given that 2012 year, we has the proper to export all Forged Steel behalf of MaHangZhou CZPT Technology Co., Ltd. which is specialised in melting and forging of unique metal considering that 1965 12 months, now King Rail is 1 of the most significant manufacturer of cast solution in China.The forged merchandise are utilized in Automotive, Aerospace, Electricity Generation, Oil & Gas, Transportation and Industrial.
Until 2013 year, numerous clients need to have Hot ROLLED and Chilly DRAWN metal from Masteel Industrial, in purchase to give 1-stop solution to our buyers, started to cooperate with Xihu (West Lake) Dis.bei Unique Metal (HangZhou and HangZhou mill), Baosteel, Tiangong Worldwide, Changcheng Unique Steel for scorching rolled instrument steel, cooperate with HangZhou Speical Steel, HangZhou HangZhou Speical Metal, Shagang Team, CZPT Team for sizzling rolled engineering steel. Now we currently set up the warehouse in ZheJiang and ZheJiang City, far more than 20000 tons ex-stock could be provided with varieties of dimensions.
Then from 2018 12 months, King Rail determine to provide even more producer processing provider, at present we could offer a variety of of lage principal shaft, turbin shaft, cylinder shaft, windy generator shaft, roller shaft, wheel forging, drill little bit forging and types of irregular components based on the drawing supplied by clients.
King Rail is the professional 1-stop steel maker and trader, stockist and exporter in China, our consumers spread all over the globe, include West Europe, North The us, South The us, Asia, Middle Asia, Africa, Australia, and many others.
The organization owns innovative unique steel smelting facilities and forging processing equipments, the principal metal-generating equipment include 2 sets of 50t extremely-high energy electrical arc furnaces,2 sets of 60t LF refining furnaces,1 established of 60t vacuum degassing refining CZPT and 4 sets of 1-20t electroslag re-melting furnaces.
The major forging equipments mostly contain:3 sets of 5t electro-hydraulic hammers, 1 set of higher-speed forging models of 800t,1600t,2000t and 4500t respectively.
For Further Info, Remember to Contact Me Listed here Now!
|
US $10-1,000 / Piece | |
10 Pieces (Min. Order) |
###
| After-sales Service: | Free After Service |
|---|---|
| Warranty: | Free After Service |
| Customized: | Customized |
| Certification: | ISO14001, ISO/TS16949, ISO9001 |
| Type: | Train Wheel |
| Material: | Hot Forged 40cr 42CrMo4 25crmo4 |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Engineering Steel | |||||
| GB GB/T 700 |
JIS JIS G3101 |
DIN (W-Nr.) EN10025-2 / DIN17100 |
AISI/ASTM ASTM A36 |
BS | OTHERS |
| Q235B | SS400 | S235JR / RST37-2 | A36 | ||
| Q235C | S235J0 / ST37-3 U | ||||
| Q235D | S235J2 | ||||
| GB GB/T1591 |
JIS | DIN (W-Nr.) EN10025-2 / DIN17100 |
AISI/ASTM | BS | OTHERS |
| Q355B | S355JR | ||||
| Q355C | S355J0 / ST52-3U | ||||
| Q355D | S355J2 / ST52-3 N | ||||
| Q355E | S355K2 | ||||
| GB GB/T 699 |
JIS JIS G4051 |
DIN (W-Nr.) EN 10083-2 |
AISI/ASTM ASTM A20 |
BS | OTHERS |
| 1018 | EN2C | ||||
| 20 | S20C | C20 | 1020 | EN3B/070M20 | ASTM A105 |
| 35 | S35C | C30 | 1035 | ||
| 45 | S45C | C45E/1.1191 | 1045 | EN8D/080M40 | |
| 50 | S50C | C50/1.1206 | 1050 | 080M50 | |
| 55 | S55C | C55 | 1055 | EN9/070M55 | |
| GB GB/T 3077 |
JIS JIS G4105/JIS G4103 |
DIN (W-Nr.) EN 10250 |
AISI/ASTM ASTM A29 |
BS BS 970 |
OTHERS |
| 40Cr | SCr440 | 41Cr4(1.7035) | 5140 | ||
| 15CrMo | SCM415 | 16CrMo44/1.7337 | |||
| 20CrMo | SCM420 | 18CrMo4/1.7243 | 4118 | ||
| 30CrMo | SCM430 | 25CrMo4/1.7218 | 4130 | 708A25/708M25 | |
| 42CrMo | SCM440 | 42crmo4/1.7225 | 4140 | EN19/709M40 | |
| SCM445 | 4145 | ||||
| 40CrNiMoA | SNCM 439/SNCM8 | 36CrNiMo4/1.6511 | 4340 | EN24/817M40 | |
| 40NiMoCr10-5/1.6745 | EN26/826M40 | ||||
| 34CrNiMo6 / 1.6582 | 4337 | ||||
| 30CrNiMo16-6/1.6747 | 4330V | EN30B/835M30 | |||
| 32CrMo12/1.7361 | EN40B/722M24 | ||||
| 16CrMnH / 20CrMnTi | 16MnCr5 / 1.7131 | 5115 | |||
| 20CrMn | 20MnCr5 / 1.7147 | ||||
| 15CrNi6/1.5919 | 3115 | ||||
| 16NiCr4/1.5714 | EN351/637M17 | ||||
| 4615/4617 | EN34/665M17 | ||||
| 14NiCr14/1.5752 | 3310/3415 | EN36/655M13 | |||
| 15NiCrMo16-5/1.6723 | EN39/835M15 | ||||
| 17CrNiMo6 | 18CrNiMo7-6 (1.6587) | 4815 | |||
| 20CrNiMo | SNCM220 | 1.6523/21NiCrMo2 | 8620 | 805M20 | |
| 20CrNiMo5 | EN353 | ||||
| GCr15 | SUJ2 | 52100/1.3505 | EN31/535A99 | ||
| 38CrMoAl | SACM645 | 41CrAlMo7/34CrAlMo5 | 905M39/905M31 | 41CrAlMo74(ISO) | |
###
|
US $10-1,000 / Piece | |
10 Pieces (Min. Order) |
###
| After-sales Service: | Free After Service |
|---|---|
| Warranty: | Free After Service |
| Customized: | Customized |
| Certification: | ISO14001, ISO/TS16949, ISO9001 |
| Type: | Train Wheel |
| Material: | Hot Forged 40cr 42CrMo4 25crmo4 |
###
| Samples: |
US$ 500/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Engineering Steel | |||||
| GB GB/T 700 |
JIS JIS G3101 |
DIN (W-Nr.) EN10025-2 / DIN17100 |
AISI/ASTM ASTM A36 |
BS | OTHERS |
| Q235B | SS400 | S235JR / RST37-2 | A36 | ||
| Q235C | S235J0 / ST37-3 U | ||||
| Q235D | S235J2 | ||||
| GB GB/T1591 |
JIS | DIN (W-Nr.) EN10025-2 / DIN17100 |
AISI/ASTM | BS | OTHERS |
| Q355B | S355JR | ||||
| Q355C | S355J0 / ST52-3U | ||||
| Q355D | S355J2 / ST52-3 N | ||||
| Q355E | S355K2 | ||||
| GB GB/T 699 |
JIS JIS G4051 |
DIN (W-Nr.) EN 10083-2 |
AISI/ASTM ASTM A20 |
BS | OTHERS |
| 1018 | EN2C | ||||
| 20 | S20C | C20 | 1020 | EN3B/070M20 | ASTM A105 |
| 35 | S35C | C30 | 1035 | ||
| 45 | S45C | C45E/1.1191 | 1045 | EN8D/080M40 | |
| 50 | S50C | C50/1.1206 | 1050 | 080M50 | |
| 55 | S55C | C55 | 1055 | EN9/070M55 | |
| GB GB/T 3077 |
JIS JIS G4105/JIS G4103 |
DIN (W-Nr.) EN 10250 |
AISI/ASTM ASTM A29 |
BS BS 970 |
OTHERS |
| 40Cr | SCr440 | 41Cr4(1.7035) | 5140 | ||
| 15CrMo | SCM415 | 16CrMo44/1.7337 | |||
| 20CrMo | SCM420 | 18CrMo4/1.7243 | 4118 | ||
| 30CrMo | SCM430 | 25CrMo4/1.7218 | 4130 | 708A25/708M25 | |
| 42CrMo | SCM440 | 42crmo4/1.7225 | 4140 | EN19/709M40 | |
| SCM445 | 4145 | ||||
| 40CrNiMoA | SNCM 439/SNCM8 | 36CrNiMo4/1.6511 | 4340 | EN24/817M40 | |
| 40NiMoCr10-5/1.6745 | EN26/826M40 | ||||
| 34CrNiMo6 / 1.6582 | 4337 | ||||
| 30CrNiMo16-6/1.6747 | 4330V | EN30B/835M30 | |||
| 32CrMo12/1.7361 | EN40B/722M24 | ||||
| 16CrMnH / 20CrMnTi | 16MnCr5 / 1.7131 | 5115 | |||
| 20CrMn | 20MnCr5 / 1.7147 | ||||
| 15CrNi6/1.5919 | 3115 | ||||
| 16NiCr4/1.5714 | EN351/637M17 | ||||
| 4615/4617 | EN34/665M17 | ||||
| 14NiCr14/1.5752 | 3310/3415 | EN36/655M13 | |||
| 15NiCrMo16-5/1.6723 | EN39/835M15 | ||||
| 17CrNiMo6 | 18CrNiMo7-6 (1.6587) | 4815 | |||
| 20CrNiMo | SNCM220 | 1.6523/21NiCrMo2 | 8620 | 805M20 | |
| 20CrNiMo5 | EN353 | ||||
| GCr15 | SUJ2 | 52100/1.3505 | EN31/535A99 | ||
| 38CrMoAl | SACM645 | 41CrAlMo7/34CrAlMo5 | 905M39/905M31 | 41CrAlMo74(ISO) | |
###
How to Identify an Axle
An axle is the central shaft that rotates a wheel or a gear. The axle may be fixed to a vehicle or to its wheels, and may include bearings for movement. The axle may also be connected to other parts of the vehicle, such as the suspension and steering systems. The axle may also include mounting points for bearings.
Identifying an axle
Identifying an axle is easy if you know what to look for. Identifying the axle is an important part of axle rebuilding. The first step in the process is to determine the make and model of the axle. This can be done by looking for the Bill of Materials number on the right or left tube.
When trying to identify an axle, it helps to know its dimensions, hub pattern, and number of bolts. The width of the axle can also help you determine its type. Wide axles are commonly used on light-duty pickup trucks, while narrow axles are typically found on sports cars. Once you’ve identified the type of axle, you can look for its bolt pattern. The diameter of the axle is another way to identify it.
Axle identification tags can also help you find an axle in a salvage yard. They are usually stamped with information that can help you determine the make, model, and gear ratio of a particular axle. It’s important to note that the tag’s information may change from one year to the next.
If you don’t know where to look for an axle tag, it’s probably a GM vehicle. GM vehicles are equipped with RPO codes, 3-character codes that designate various features of a vehicle. The stickers are usually located near the spare tire or in the glove box compartment. Simply scan the RPO code using your smartphone to obtain this information.
When changing an axle in a truck, it is imperative to identify the rear end first. Differential configurations and shapes can vary greatly, so you must be able to find the right one. Luckily, the process of identifying an axle is simple, and there are several ways to do it. The most common methods for identifying an axle are the axle tag number and the shape of the differential cover.
Inspection
Axle inspection is an important part of the manufacturing process and must be carried out many times during its working life. There are many ways of inspecting an axle, including visual inspection and ultrasonic testing. Axles come in hollow and solid styles. Their dimensions vary depending on the type of rail that they are attached to. London Underground trains use a type of axle known as a VLU axle.
Inspection of axle flanges should be done at least once a year. The inspection process can vary depending on the type of axle and the type of repair required. Using a magnetic particle inspection can detect cracks in the axle flanges. Another method is HFEC, which detects cracks in the attach bolt holes.
The air springs should also be checked for chafing or damage. The front and rear spring hangers should be free of cracks or excessive movement. The front bushing should also be checked for deterioration and wear. Fasteners should also be checked for looseness and torque. If the fasteners are loose or damaged, replace them immediately.
Repair
It is important to get regular inspections of your car’s axle to avoid costly repairs. Fortunately, most axle repairs are relatively straightforward. All it takes is a few simple tools and a safe way to prop up your car. However, if you don’t feel confident performing a repair on your own, consider hiring a mechanic for the job.
Axles are one of the most commonly damaged parts of a car, and repairing one can help you keep the car in good shape for years to come. In fact, it can even improve the performance of your tires. If your car is experiencing serious problems, you should seek professional assistance to ensure a safe repair.
If you suspect an axle problem, it’s important to get it checked as soon as possible. Bad axles can cause a bumpy ride, affect tire rotation, cause grease to leak from the wheels, and even lead to a wreck. Ultimately, you’ll want to avoid driving your car if you suspect a problem with its axle.
Your car’s axle may make a clicking noise as it moves. It could also cause vibrations that affect your passengers or even the steering wheel. The axle is an important part of the car because it supports the weight of the car and keeps the wheels in place. If the problem affects your car’s handling, it might be time for an axle replacement.
You can tell if an axle is damaged by excessive vibrations or unusual noises. This can be caused by a number of problems, including overloading the vehicle, bad potholes, or even bad carrier bearings. When you hear this noise, you should seek professional help immediately to ensure the safety of your vehicle and your passengers. A bad axle can cause other car problems as well, such as a faulty ball joint or suspension problems.
editor by czh 2022-12-17
China 1541h Alloy 5 Lug Left Hand Rear Axle for 7.5″ and 8.8″ Ford Ranger axle bearing
Solution Description
Overview
| Quick Particulars | Product Amount | Hi-shen-Backyard Axle | |||
| Content | Steel/Stainless metal/Aluminium etc. | ||||
| Size | According to your drawings | ||||
| OEM or Trade | OEM | ||||
| QC Technique | 100% inspection prior to cargo | ||||
| Certification | ISO9001:2008, TS16949 | ||||
| Surface treatment method | Zinc Plating, Phosphating and oiled, powder coated and so on | ||||
| Payment | T/T | ||||
| Industry | Euro, United states ,Australian ,Spain ,Canada and many others | ||||
| Kind | Laser cutting elements | ||||
| Source Ability | Source Potential | 100000 Piece/Items for every Month | |||
| Packaging & Shipping and delivery | Packaging Information | According to the customer request and the item characteristics | |||
| Port | HangZhou,China | ||||
Firm profile
HangZhou Xihu (West Lake) Dis. Hi-shen Hardware Co.,Ltd. stands on the lovely and abundant CZPT Port —-HangZhou town, ZHangZhoug province, nearby Xihu (West Lake) Dis. port, practice station and substantial speed way supply a prerequisite for practical transportation!
The business recognized in 2006 , focus in all sorts of sheet steel fabrication , cnc machining parts , welding parts , stamping areas , tube bending areas and so on . Possess good sustainable growth infrastructure and pressure potential for fast response to market demand from customers . We have out ISO9001 Top quality Management Method in our administration .
Good quality Control
To make sure appropriate common and choose equal common for materials and technique requirements ,just before managing ,we would like to give formal substance certificate exhibiting chemical compositions and home ,also if you require ,we can provide control prepare ,demonstrating processing and inspection tooling.
Packaging & Shipping
Organization Data
Our Service
1. OEM/ODM Providers, We have engineers to style as buyer’s requirements.
two. Specialized in manufacture metal products, the manufacturing unit outfitted with Reducing devices, punch devices with 10T-60T, plate slicing machines, pipe bending machines, roll bending machine, drilling equipment, milling equipment, lathe, grander equipment, Co2 and argon-arc welding equipment, and so on.
three. 450m long all automatized metallic area processing plant, all automatized oil clean, rust eliminating, powder coating, curving, h2o clean, drying, and other procedures.
FAQ
Q: Are you trading company or maker ?
A: We are manufacturing unit with ISO and TS certification .
Q: How extended is your shipping time ?
A: Normaly 30days but it dpends on. For laser reducing parts , we can provide it within 10days, for sheet steel fabrication we can catch up inside 25 times.We will constantly try out our greatest to meet customer’s requirment if there is urgency.
Q: Do you supply samples ? Is it cost-free ?
A: Yes , we can offer samples for free if there is no jigs or toolings needed in the production .
Q: What is your payment phrases ?
A: Generally we do at 30% TT as deposit with full tooling price if there is , and the balanace to be paid prior to shipment after acceptance of top quality . But we also can supply far better conditions right after we commence cooperation while we have more know about every other
|
US $100 / Piece | |
500 Pieces (Min. Order) |
###
| After-sales Service: | Customer |
|---|---|
| Condition: | New |
| Axle Number: | Customize |
| Application: | Trailer |
| Certification: | ISO |
| Material: | Steel |
###
| Customization: |
Available
|
|---|
###
| Quick Details | Model Number | Hi-shen-Garden Axle | |||
| Material | Steel/Stainless steel/Aluminium etc. | ||||
| Size | According to your drawings | ||||
| OEM or Trade | OEM | ||||
| QC System | 100% inspection before shipment | ||||
| Certification | ISO9001:2008, TS16949 | ||||
| Surface treatment | Zinc Plating, Phosphating and oiled, powder coated and so on | ||||
| Payment | T/T | ||||
| Market | Euro, USA ,Australian ,Spain ,Canada etc | ||||
| Type | Laser cutting parts | ||||
| Supply Ability | Supply Ability | 100000 Piece/Pieces per Month | |||
| Packaging & Delivery | Packaging Details | According to the customer request and the product characteristics | |||
| Port | NINGBO,China | ||||
|
US $100 / Piece | |
500 Pieces (Min. Order) |
###
| After-sales Service: | Customer |
|---|---|
| Condition: | New |
| Axle Number: | Customize |
| Application: | Trailer |
| Certification: | ISO |
| Material: | Steel |
###
| Customization: |
Available
|
|---|
###
| Quick Details | Model Number | Hi-shen-Garden Axle | |||
| Material | Steel/Stainless steel/Aluminium etc. | ||||
| Size | According to your drawings | ||||
| OEM or Trade | OEM | ||||
| QC System | 100% inspection before shipment | ||||
| Certification | ISO9001:2008, TS16949 | ||||
| Surface treatment | Zinc Plating, Phosphating and oiled, powder coated and so on | ||||
| Payment | T/T | ||||
| Market | Euro, USA ,Australian ,Spain ,Canada etc | ||||
| Type | Laser cutting parts | ||||
| Supply Ability | Supply Ability | 100000 Piece/Pieces per Month | |||
| Packaging & Delivery | Packaging Details | According to the customer request and the product characteristics | |||
| Port | NINGBO,China | ||||
The Different Types of Axles
An axle is the central shaft of a gear or wheel. Axles are either fixed to the wheels or fixed to the vehicle. In some cases, they rotate together with the wheels and vehicle. The axle may also include bearings and mounting points. There are many types of axles, and it is important to understand the difference between each type.
Transaxle
The transaxle is the single mechanical device that combines the functions of a car’s differential, axle and transmission. It’s produced in manual and automatic models. A manual version is the preferred one for everyday driving, while an automatic one is more efficient in preventing vehicle damage. Here are some basics about the transaxle.
Transaxles are essential components of a car’s drivetrain, and any problems can cause major damage and leave the driver stranded. Transaxles include the transmission and the differential, which transfer the engine’s power to the wheels. Taking the time to check the transaxle is important to ensure that everything is functioning properly.
The transaxle is a very complex machine that combines the functions of the final drive and the transmission into one compact unit. The transaxle is a very versatile piece of automotive technology, and is an essential component of a front-wheel-drive car. In addition to conventional front-wheel-drive vehicles, many modern rear-wheel-drive vehicles use a transaxle to provide more even weight distribution.
The first American car to use a transaxle was the Cord 810 in the early 1920s. It was well ahead of its time, but was unsuccessful. For many years, the front-wheel drive automobile was absent from the United States automotive scene. It wasn’t until the 1960s that a front-wheel drive automobile re-emerged. A front-wheel-drive automobile, known as a transaxle, was the first to reach the market, and it’s not the only car to use this gearing.
A transaxle is a good option for vehicles with an extreme amount of torque. This system can handle powerful engine designs while keeping weight in the engine bay. It is not a perfect solution for all vehicles, however. In some vehicles, the extra weight added to the engine bay will affect the performance. The added weight will reduce traction. In addition, a transaxle mounts behind the engine, which adds weight to the rear.
Transaxles are the primary part of vehicles that have front-wheel drive. Their purpose is to transmit power from the engine to the drive wheels. The front-wheel-drive assembly had 2 short axles with complicated ball joints.
Full-floating axle
A full-floating axle is different from a semi-floating axle in several ways. A semi-floating axle is used for rear wheel drive cars, where it has a bearing mounted in the axle shaft. This axle supports the vehicle’s weight and transmits the drive torque from the transmission to the wheels. However, a semi-floating axle’s load capacity is limited by the size of the axle bearing. A full-floating axle, on the other hand, has the bearing mounted on the outside of the axle tube. The bearing is the only part of the axle that supports the vehicle, and the hub and bearing assembly are held together by a large nut.
The drive axle on a full-floating axle is splined at both ends so that it can easily be removed from the rear of a vehicle without removing the wheel. This type of axle makes it possible to change gears quickly and easily. Because of this, it’s not necessary to remove the wheels and tires in order to replace the axle. Instead, a common tool used to remove the axle from the wheel hub is an axle wrench.
Full-floating axles are more common in heavy-duty vehicles. The ability to carry heavy loads without causing the axle to break is a big advantage to full-floating axles. These axles require less maintenance and require less bends than traditional axles and may even be worth the extra investment if you have a heavy load to carry.
A full-floating axle allows the driver to change a broken axle shaft without having to remove the entire wheel. A full-floating axle will also allow the driver to remove the axle shaft without having to take off the wheel. Full-floating axles are also more durable than semi-floaters, which have weight resting on the axle tubes and housing.
While a full-floating axle is more expensive to manufacture, it is better for heavier vehicles that carry heavy loads. It is better to choose a full-floating axle if you have a heavy load or plan on towing.
Three-quarter floater
A three-quarter floating axle is a type of floating axle that’s a compromise between the full and semi-floating types. Its bearings are located on the axle casing rather than on the hub, which means that it’s less susceptible to axle breakdown. However, it’s not as robust as a full floating axle.
This design combines the benefits of fully-floating axles with the simplicity of a semi-floating axle. Instead of having multiple wheel bearings, a single wheel bearing is installed in the center of the hub. The hub is then keyed rigidly to the axle shaft, providing a connecting connection and maintaining wheel alignment.
While a full-floating axle is the most common style of truck axle, you may see the three-quarter floater on the side of a pickup. It was common for 3/4-ton Gms to use these axles until the 1980s. Dodge and Ford also used a semi-float axle called a Dana 60. The difference between the two types of axles is the amount of support provided by the axleshaft and hub, and the number of lug nuts on the axleshaft and hub are different.
The three-quarter floater axle drive assembly of the present invention is illustrated in FIG. 1. The axle housing comprises an elongated axle tube 12, a hub member 30, and a hub shaft 16. A hub member 30 is rotatably supported on the axle tube 12 by an anti-friction bearing assembly 42. The axle shaft is retained in place by a domed plate 26.
This axle design has two main advantages. First, it transfers the weight of the vehicle to the axle casing. It also helps transfer the driving torque and side thrust to the wheel. This type of axle also has a differential cross shaft, which limits inward axial movement of the axle shaft.
Dead axle
A Dead axle is a structural component that supports the rear wheel of a vehicle. It can either be straight or angled and is located behind the drive axle. Depending on the vehicle, the dead axle may be steerable. Tag axles are also common on agricultural equipment and certain heavy construction machinery. They are also known as lazy axles because they only contact the ground when a vehicle is carrying a significant load, thus saving tire wear. Dead axles may be rigid or flexible.
Some rear dead axles can also be configured as an air tank. The air is taken in and out of the rear dead axle through the port portions of the rear axle. This can reduce the size of the air tank. For this reason, it is a preferred design for rear dead axles. While most vehicles are equipped with two axles, the rear axle can be used to accommodate cargo.
FIG. 1 is a schematic plan view of a vehicle with two rear axles. The front axle is called the drive axle and the rear dead axle is called the dead axle. These components are located on a truck body frame. There are also battery and fuel tanks. They are used to distribute driving force from the front to rear wheels.
An axle is a crucial component of a vehicle. It transfers power from the engine to the wheels. A live axle is connected to the drive shaft and transmission, while a dead axle receives no direct power. This is the main difference between a live and dead axle. Although a dead axle is not as useful as a live one, it is still essential to understand what drives a car.
Dead axles are used in many vehicles for different purposes. Many large trucks are fitted with several of them for load bearing purposes. They also help distribute weight.
editor by czh 2022-12-12
China Bicycle Mountain Bike Polished Solid Bearing Front Axle Bearing Rear Axle axle arm
Product Description
we have the autonomy in operation of the import and export business.
Our company has a dozen of great profession product machines.
And our productions get a well sale to the bicycle factory and accessories manufactures
production all over the country, which based on good quality, cheap price,
and perfect after-sales service.
So our export sales have been growing year by year.
Our productions are spreading over 40 countries and regions including Southeast Asia,
East Europe, Africa, and South America.
Hard work and CZPT pursuit is our spirit. Quality first and customer first is our principle.
Everyone in HongChi Company is sincerely inviting the colleague all over the world
to have cooperation and a better future.
| Color: | Silver | Payment Terms: | T/T L/C D/P |
| Name: | Polished solid bearing front axle bearing rear axle | Material: | Metal |
| Shipping Port: | NingBo | Processing customization | Yes |
|
US $0.4-0.6 / Piece | |
500 Pieces (Min. Order) |
###
| Condition: | New |
|---|---|
| Customized: | Customized |
| Application: | Kids Bike, Road Bike, Mountain Bike, Ordinary Bicycle |
| Material: | Metal |
| Transport Package: | Carton |
| Specification: | Metal |
###
| Customization: |
Available
|
|---|
###
| Color: | Silver | Payment Terms: | T/T L/C D/P |
| Name: | Polished solid bearing front axle bearing rear axle | Material: | Metal |
| Shipping Port: | NingBo | Processing customization | Yes |
|
US $0.4-0.6 / Piece | |
500 Pieces (Min. Order) |
###
| Condition: | New |
|---|---|
| Customized: | Customized |
| Application: | Kids Bike, Road Bike, Mountain Bike, Ordinary Bicycle |
| Material: | Metal |
| Transport Package: | Carton |
| Specification: | Metal |
###
| Customization: |
Available
|
|---|
###
| Color: | Silver | Payment Terms: | T/T L/C D/P |
| Name: | Polished solid bearing front axle bearing rear axle | Material: | Metal |
| Shipping Port: | NingBo | Processing customization | Yes |
Axle Types
An axle is the central shaft of a rotating gear or wheel. Axles are either fixed to the wheels or mounted directly to the vehicle. They rotate with the wheels and can be equipped with bearings for smooth operation. Axle types include Czpt axles, Drop out axles, and Splines. Each has a unique design and function.
Spindles
The spindles on a vehicle’s axle are the main components that connect the wheels to the axle. They mount the wheels on the axle and fasten the braking system to the axle assembly. The spindles are fastened to the axle assembly with king pins and ball joints. They also fasten the wheel hub to the spindle via a castelated nut. In both applications, axle spindles are pivot points that are used to make turning motion possible.
There are three types of spindles for an axle. Typically, the spindles are bolted to the ends of a tubular axle, which is suspended by springs. The third type is a short stub axle, which uses a torsion beam to help the axle maintain a smooth ride over bumpy terrain.
Czpt axles
Czpt axles are available in a variety of configurations. From beam-to-independent designs to single-point-to-double-point designs, there’s a Czpt axle to fit your needs. These axles are designed to provide maximum power in a small package. Czpt has a proven track record of innovation and durability.
Czpt axles are found in front-end steering vehicles and heavy-duty pickups. Some models only use the front axle. There are also Czpt axles for light-duty pickups. You can easily recognize a Czpt axle by its shape. Some online sources offer diagrams to help you identify the axle.
Among the most popular Czpt axles are the Czpt 60 and the Czpt 44. Both models are desirable in their own right. You can order Czpt axle parts from the Czpt website. These products include u joints, differential cases, and loc pins. These parts can be purchased online, and they will be delivered right to your door.
In addition to the Czpt 60 front axle, Czpt axles also feature great aftermarket support. They can be upgraded with locking differentials, limited slip differentials, and high-capacity differential covers. They also feature heat-sinks that keep the axle cool. Czpt axles are also compatible with nearly every traction aid in the market.
Czpt is a global leader in driveline products and genuine service parts. With over a century of experience manufacturing quality products, Czpt axles provide performance and reliability.
Drop out axles
Drop out axles are crucial for mounting a front wheel to a bike. If the axles are not present, the wheel will not be able to be mounted. These dropouts are made of either steel or aluminum. They are 5.8mm thick. Axles with quick release axle hubs are compatible with steel dropouts.
Axle manufacturers make different dropout axles that are compatible with different axle sizes. These axles are available in a wide range of styles. The Shimano modular dropout, for example, is available in three main axle specifications: Road, Track, and Maxle. These dropouts are also available with different axle pinions.
Drop out axles can be quick release or through. Quick release axles are lighter than thru axles. They weigh approximately 60 to 80 grams. The difference between quick release and thru axles is in the thread pitch. Quick release axles have a smaller pitch than thru axles, which allows for easier installation and removal.
Thru axles are a popular choice for mountain bikes. They prevent the front wheel from coming out while riding. They are more secure and can prevent a wheel from coming off when moving. They are usually made of a thicker rod and screw into the frame. Both types of dropouts have their advantages and disadvantages. You should choose the type that works best for your needs. This is a decision that you will have to make on your own.
CV joints
When your vehicle is in motion, the CV joints on your axle transfer torque to the wheels. Although these joints come in a wide variety of designs, they all contain a bearing assembly that allows them to move. These joints are protected by a rubber boot that is filled with grease to keep them lubricated. When they become worn, they can cause your car to shudder and vibrate while accelerating.
To avoid joint failure, it is important to keep the CV joints free of road debris. Luckily, the boots are made of durable rubber, and a good quality one can last 100,000 miles. Unfortunately, if the rubber boot is torn, dirt and moisture can leak into the joint. Therefore, it’s important to inspect the boots regularly, and replace them if necessary.
Damaged CV joints can make control of your vehicle extremely difficult. They can also cause your steering wheel to jerk when you’re accelerating, increasing the risk of an accident. A damaged CV joint can also lead to axle separation, which can cause massive damage and a serious safety risk. However, if you don’t have the funds to replace the joint, you can repair the problem by applying a sleeve.
Unlike other drive systems, CV axles can transfer torque at an angle. This is possible because of the constant velocity joints. They’re akin to the univeersal joints on tail shafts, except they work on a much larger angle. This allows the drive shaft to transfer torque to the front wheels smoothly. It also allows the axle to move up and down.
A damaged CV axle will make a characteristic clicking sound when you’re turning the vehicle. This noise is very distinctive and can only be heard when the vehicle is in motion. If you hear this noise, then the joint is worn and is in danger of failure. If this noise is loud and consistent, you’ll need to replace it.
editor by czh 2022-11-28
China High Performance Rear Axle Without Flange ACR2011A Vkba3251 513080 NSK NTN Koyo NACHI IKO Used on Honda Accord 1995-1997 Wheel Hub Units Bearing axle car
Product Description
Wheel Hub Units can bear the weight and provide precise guidance for the rotation of the hub. It bears both axial load and radial load, and is a very important component. The hub bearing unit is developed on the basis of standard angular contact ball bearings and tapered roller bearings. It combines 2 sets of bearings as a whole. It has good assembly performance, can omit clearance adjustment, light weight, compact structure, and load capacity. Large, sealed bearings can be pre-loaded with grease, omit external wheel hub seals, and are free from maintenance. They have been widely used in cars, and there is a trend to gradually expand their applications in trucks.
A wide range of applications:
• agriculture and forestry equipment
• automotive and industrial gearboxes
• automotive and truck electric components, such as alternators
• electric motors
• fluid machinery
• material handling
• power tools and household appliances
• textile machinery
• two Wheeler.
Our Bearing Advantage:
1.Free Sample bearing
2.ISO Standard
3.Bearing Small order accepted
4.In Stock bearing
5.OEM bearing service
6.Professional:16 years manufacture bearing
7.Customized bearing, Customer’s bearing drawing or samples accepted
8.Competitive price bearing
9.TT Payment or Western Union or Trade Assurance Order
| Product Name |
|
|
| Brand Name | NTN CZPT CZPT CZPT Timken | |
| Seals Type | OPEN/2Z/2RS/Z/RS | |
| Material | Chrome Steel ,Stainless steel,Ceramic,Nylon | |
| Clearance | C0,C2,C3,C4,C5 | |
| Precision Grade | P0,P6,P5,P4,P2(ABEC1, ABEC3, ABEC5, ABEC7, ABEC9) | |
| Greese | SRL ,PS2, Alvania R12 ,etc | |
| Number of Row | Single Row | |
| Certifications | ISO 9001 | |
| Package | Box,Carton,Wooden Box,Plastic Tube or Per buyers requirement . | |
| MOQ | 1PCS | |
| Serice | OEM | |
| Sample | Available | |
| Payment Term | TT or Western Union | |
| Port | HangZhou/HangZhou/ZheJiang |
Products Display
Q: Are you a trading company or a manufacturer ?
A: We are a manufacturer more than 16 years with professional skill.
Q:Do you provide samples ? Are they free or extra ?
A:Yes, we could offer the sample, while could you pay for the freight?
Q:What kind of freight will you use?
A:Shipment, FedEx, TNT, DHL, UPS and EMS etc.
Q:Could you make bearings with our OEM logo,color and packing?
A: Of course. Please inform us your brand logo,color and packing.
Q: How long is your delivery time?
A: Generally it will be 3-7 days if the goods are in stock; while it will be 15-30 days if the goods are not in stock, which is according to your quantity.
Q: Will you check these products before shipment?
A: Yes, products will be strictly inspected by our own professional QC Process System before shipment.
Q: What’s the Payment Terms ?
A: Usually we accept T/T ,western union ,and order online.
If you want to know more details, please contact us.
| After-sales Service: | We Provide After Sales Service |
|---|---|
| Warranty: | 3month |
| Type: | Wheel Hub Bearing |
| Material: | Chrome Steel |
| Tolerance: | P0, P6, P5, P4, P2 |
| Certification: | ISO9001, ISO9006 |
###
| Samples: |
US$ 5/Set
1 Set(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Product Name |
###
###
###
|
