Product Description

2571 Lohas HI-END fat tire electric bike with 1000w mid drive motor 

 

Specification

 

Electric system		Main components
Motor	1000w CZPT mid drive motor G510	Frame	6061 aluminium alloy.
		Tyres	26″ ×4.0 Kenda
Battery	48V 11.6Ah CZPT battery	Rim	Al alloy double wall and CNC side wall.
		Front fork	RST Xihu (West Lake) Dis.  with Suspenion and Lockout
		Front brake	Tektro Hydraulic Disc Brake
PAS	TORQUE SENSOR	Rear brake	Tektro Hydraulic Disc Brake
Controller	intelligent bruhsless.12 month warranty	Speed gears	SHIMANO Acera 8 speeds gear
Charger	AC 100V -240V 2amps smart charger	Rear derailleur	SHIMANO
	Charging time:4-6hours 12 month warranty	Stem	al alloy
Performance		Brake lever	With power off switch.Tektro
Max speed	45km/h (USA & Canada).	Chain	KMC Rust resistant chain.
Range	40-60km per charge	Chain wheel	al alloy crank.
		Saddle	mountain style saddle. SR
Max load	120kgs	Rear suspension	A5 rear shock absorber
Net weight	29.50kgs	Lighting	front    LED
Gross weight	32.0kgs	Pedal	Mountain  style pedal .
Container load	96pcs/20ft container	Packing size	165*27*77cm

 

 More details

 

Acera 8 speed gear

Rear Shock Absorber

 

1000w CZPT mid drive G510

Bafang DCP 18 display 

8 speed gear shifter 

 

RST XIHU (WEST LAKE) DIS. suspension fork 

 

Company Information

LOHAS VEHICLE  is an electric bicycle factory which is located in HangZhou city, ZHangZhoug Province which is near ZheJiang and HangZhou . High speed train straight  to arrive to our company.

We have more than 10years OEM experience, supported by top Technical Team and excellent Sales Team.

After developing the new electric bicycle,Staff in  our company keep riding the bikes for commuter everyday ,to test the stability ,also to improve the model from every aspect.

 

FAQ

1. What’s the minimum order MOQ?

 

Our MOQ is 15pcs(30 pcs is required for special model )

 

2. What is the production and delivery time? 

 

Production time is from 15 to 50days. Depending on the models. 

 

3. Can I order a sample?  

 

Yes. we will send a sample to you by shipping or DHL/TNT, but you must pay the sample and shipping or DHL/TNT fee. 

 

4. How about warranty ?

 

alloy frame 3 years , motor 1 years, lithium battery 2 years, controller 1 years.

 

5. Could I use my own LOGO or design on goods?

 

Yes. When order quantity is big, you can use your own LOGO or your language manual etc,

 

6. Does company accept EURO ?

 

Yes. We also have EURO account, not only USD.

 

7. What is the payment terms?

 

We accept T/T, L/C, DP, DA , OA, West Union

 

8. How can I go to the factory ?

our  factory is located in HangZhou city, ZHangZhoug province, China.

It is 1.5 hours by air from HangZhou;  2 hours by D-train from Shangha to HangZhou ;

9. Can we mix the 20ft/40ft/40HQ container?  

Yes, you can mix it , you can mix 2-5 models in a 20FCL container for Alloy Electric bicycle

 

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.