China supplier Original CZPT CZPT Hybrid Servo Driver with Great Quality and Competitive Price with Great quality

Product Description

Product Description

Original ZheJiang Delta hybrid servo driver with great quality and competitive price

Why need servo control system:
When using a hydraulic system, the power consumption is more than 75% of the whole injection system. Different pressures and flows are requireed during the process, including mold closing, injection, holding pressure and mold opending. When the flow and pressure requirements exceed the settings, the relief or proportional valve will be adjusted, resulting in a 40%-75% higher power consumption.

The servo control system advantages:

1. Ultra energy saving:
    Save up to 60% compared traditional injection molding machine(60%) fixed displacement
    depend on the different injection conditions, can save up to 80% at the most.
2. Low system temperature
    decrease system temparature by 5-10°C to save cooling costs.
3. Highly accurate repeatability
    result in accurate control of flow and pressure
4. Long pressure holding time: benifit to thick product manufacture
5. Good frequency response rate: up to 50 ms

Detailed Photos

 

Configurations

NVICKS standard configurations:

Pump displacement mL/r

Pressure
Mpa

Max Speed r/min

Sumitomo pump Model

Delta servo driver

Phase Servo Motor

Pump Stand shaft Coupling

Pressure Sensor

Proportion Valve

Signal Coverting Board

32

14

2000

QT42-31.5

VFD110VL43A-J 11KW

1005F17.3 10KW

BTJ-01

Italy GEFRAN

03 small size

0-1A to 0-10V

40

14

2000

QT42-40

VFD150VL43B-J 15KW

1007F17.3 14KW

BTJ-01

Italy GEFRAN

03 small size

0-1A to 0-10V

50

14

2000

QT52-50

VFD185VL43B-J 18.5KW

1008F17.3 17.6KW

BTJ-02

Italy GEFRAN

03 small size

0-1A to 0-10V

63

14

2000

QT52-63

VFD220VL43B-J 22KW

1571F15.3 20KW

BTJ-02

Italy GEFRAN

03 small size

0-1A to 0-10V

80

14

2000

QT62-80

VFD300VL43B-J 30KW

1013F17.3 28.7KW

BTJ-06

Italy GEFRAN

06 Big size

0-1A to 0-10V

100

14

2000

QT62-100

VFD370VL43B-J 37KW

1315F15.3 29KW

BTJ-06

Italy GEFRAN

06 Big size

0-1A to 0-10V

125

14

2000

QT62-125

VFD450VL43B-J 45KW

1320F17.3 39.4KW

BTJ-07

Italy GEFRAN

06 Big size

0-1A to 0-10V

For bigger pressure requirements, pls contact us for the matched configurations!

Product Parameters

 

Installation Instructions

Applications

Our Advantages

1. Top Quality
Depend on 15 years experience at pumps design and manufacturing, we have a top quality compared with domestic and overseas manufacturers, all of our products are with 1 year warranty time.

2. Strict Quality Control System
We have the most strict quality control system, all of our products are 100% tested before shipment and each of them has 1 tracking code in order to make sure they are with good quality to our customers.

3. Advanced machinery equipment
All the machines are new CNC machines we imported from Germany and Japan in order to reach more higher demand at the products accuracy.

4. Strong Technical team
Our technical team all have more than 20 years experience at pumps design and engineering, our chief engineer has more than 40 years experience at pumps design. We have 1 15 persons research team, responsible for pumps improvement research and new products development.

5. Competitive Price
Because of good management, our price is more competitive than the original products, more reasonable than most of the domestic suppliers.

6. Fast Delivery time
We can ship small orders within 1 week, for big orders such as within 100 sets of servo systemsusually we can make shipment within 1 month.

7. Warranty Period
All of our products are within 1 year warranty period after the shipment from our factory.

8. Considerate Service
We can provide technical support at any time if our customers meet any issue during the using, we will provide solutions at the soonest time.

9. Long development strategy
We would like to establish a long time strategy cooperation relationship with our customers, to promote Albert brand together, support and train the potential customer to be our agent at each country and region all over the world.

 

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.
air-compressor

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.
air-compressor

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

China supplier Original CZPT CZPT Hybrid Servo Driver with Great Quality and Competitive Price     with Great qualityChina supplier Original CZPT CZPT Hybrid Servo Driver with Great Quality and Competitive Price     with Great quality