Product Description
We have kinds of options regarding the wheels size, battery packs, brake levers, tires, controllers, etc.
Motors could be 250w/350w/500w/750w/1000w/1500w/2000w/3000w
Any comments and requirements are welcome!
| Main Features | ||
| 250w-100w MID drive motor 8FUN, dapu brand | ||
| 36v/48v lithium battery, rear rack battery | ||
| OEM options of frame and wheel colors | ||
| Main Components | ||
| AMS-TDE-SR-B | other options | |
| Motor: | 36v 250W REAR hub motor | 36V / 48V 250W-1000W |
| Battery: | 36V10Ah Lithium battery | 48v 14Ah max |
| Display : | bafang/dapu LCD display | |
| Brake system | Disc Brake | Hydraulic brake |
| PAS: | 1:1 intelligent PAS systerm | |
| Charger: | 110~240V, 50-60Hz, Plug according to final market requirement | |
| Brake lever: | Cheap option and TEKTRO brand | |
| Wheel: | 26″x4.0 W/O wholes | |
| Controller: | 36V/48V smart controller | |
| Fork: | suspension fork | |
| Optional Components | ||
| F/R Light | LED | |
| Throttle: | Thumb or Twist throttle | |
| Color: | shinning black/mat black/white/black/orange/blue/green/any other specilized | |
| Seat post: | suspension | |
| Packing | ||
| G.W. | 36 kgs | |
| N.W: | 32 kgs | |
| Carton size: | 156*38*80 CM | |
| Container QTY: | 60pcs/20’GP, 120pcs/40’GP | |
Company Information
HangZhou Aimos Technology Co.,Ltd, located in HangZhou City, ZheJiang Province,one hour hi-speed
train from ZheJiang and HangZhou.
The company is engaged in export kinds of electric products and techniques of Electric Bikes , electric
bike kits, and electric scooters, and so on.
Our Services
1. Our products are targeted for the overseas demanding market, and we have a strong sense of
responsibility for the quality, we consider quality as our life.
2. We choose good suppliers to work together; the main fittings are mostly from Japan, ZheJiang
and other top suppliers.
3. We carry on periodic training to our staffs, in order to enhance their consciousness of quality.
4. All the components should be checked carefully before assembling, thus, we can make sure that
the broken or deficient components will not be fixed to the electric bikes.
5. Each electric bikes will be strictly inspected before packing and shipping out to insure that the
could be satisfied with you.
6. We always try to improve the quality of our products, meanwhile we pay much attention to our
customer service, we will provide a certain amount of free spare part to you when you
place a quantity order, quality problems will be solved at the first time when you come across it.
FAQ
1. Q: Can I get some samples?
A:we offer sample for quality check. Considering electric bike as big item with certern value,we don’t
offer free sample and transportation fee is not contained in sample price .
2. Q: Do you have the products in stock?
A: we do have product in stock for demestic sale,it may not suit your demand.
3. Q: What’s the delivery time?
A: It usually takes about 45-60 working days
But the exact delivery time might be different for different orders or at different time.Once we
confirmed all detail of order, we’ll put all source into it.
4. Q: Can I mix different models in 1 container?
A: Yes, different models can be mixed in 1 container.
5. Q: Should we pay the high taxes?
A: We can make a low-value invoice to help you clearing Customs and avoid the taxes.
6. Q:Do you accept Paypal ?
A: Yes, we accept Paypal. Besides, we offer bank transfer and Western Union.
7. Q:Why choose you?
A: Strong quality controll : We test and check all the parts before on produce line
Check and test esch unit when it ready.
8.Q:When you on the line for service
A: We ussally on the line at 8:30am to 5:30pm ZheJiang time. Otherwise,
We also can do service for you after the working time.
9.Q:Are you a factory or a import and export company?
A: We are a manufacture ,So as a professional manufacture we not only can supply the bike we
have, We also can design for you if you have the draft
Lead Screws and Clamp Style Collars
If you have a lead screw, you’re probably interested in learning about the Acme thread on this type of shaft. You might also be interested in finding out about the Clamp style collars and Ball screw nut. But before you buy a new screw, make sure you understand what the terminology means. Here are some examples of screw shafts:
Acme thread
The standard ACME thread on a screw shaft is made of a metal that is resistant to corrosion and wear. It is used in a variety of applications. An Acme thread is available in a variety of sizes and styles. General purpose Acme threads are not designed to handle external radial loads and are supported by a shaft bearing and linear guide. Their design is intended to minimize the risk of flank wedging, which can cause friction forces and wear. The Centralizing Acme thread standard caters to applications without radial support and allows the thread to come into contact before its flanks are exposed to radial loads.
The ACME thread was first developed in 1894 for machine tools. While the acme lead screw is still the most popular screw in the US, European machines use the Trapezoidal Thread (Metric Acme). The acme thread is a stronger and more resilient alternative to square threads. It is also easier to cut than square threads and can be cut by using a single-point threading die.
Similarly to the internal threads, the metric versions of Acme are similar to their American counterparts. The only difference is that the metric threads are generally wider and are used more frequently in industrial settings. However, the metric-based screw threads are more common than their American counterparts worldwide. In addition, the Acme thread on screw shafts is used most often on external gears. But there is still a small minority of screw shafts that are made with a metric thread.
ACME screws provide a variety of advantages to users, including self-lubrication and reduced wear and tear. They are also ideal for vertical applications, where a reduced frictional force is required. In addition, ACME screws are highly resistant to back-drive and minimize the risk of backlash. Furthermore, they can be easily checked with readily available thread gauges. So, if you’re looking for a quality ACME screw for your next industrial project, look no further than ACME.
Lead screw coatings
The properties of lead screw materials affect their efficiency. These materials have high anti-corrosion, thermal resistance, and self-lubrication properties, which eliminates the need for lubrication. These coating materials include polytetrafluoroethylene (PFE), polyether ether ketone (PEK), and Vespel. Other desirable properties include high tensile strength, corrosion resistance, and rigidity.
The most common materials for lead screws are carbon steel, stainless steel, and aluminum. Lead screw coatings can be PTFE-based to withstand harsh environments and remove oil and grease. In addition to preventing corrosion, lead screw coatings improve the life of polymer parts. Lead screw assembly manufacturers offer a variety of customization options for their lead screw, including custom-molded nuts, thread forms, and nut bodies.
Lead screws are typically measured in rpm, or revolutions per minute. The PV curve represents the inverse relationship between contact surface pressure and sliding velocity. This value is affected by the material used in the construction of the screw, lubrication conditions, and end fixity. The critical speed of lead screws is determined by their length and minor diameter. End fixity refers to the support for the screw and affects its rigidity and critical speed.
The primary purpose of lead screws is to enable smooth movement. To achieve this, lead screws are usually preloaded with axial load, enabling consistent contact between a screw’s filets and nuts. Lead screws are often used in linear motion control systems and feature a large area of sliding contact between male and female threads. Lead screws can be manually operated or mortised and are available in a variety of sizes and materials. The materials used for lead screws include stainless steel and bronze, which are often protected by a PTFE type coating.
These screws are made of various materials, including stainless steel, bronze, and various plastics. They are also made to meet specific requirements for environmental conditions. In addition to lead screws, they can be made of stainless steel, aluminum, and carbon steel. Surface coatings can improve the screw’s corrosion resistance, while making it more wear resistant in tough environments. A screw that is coated with PTFE will maintain its anti-corrosion properties even in tough environments.
Clamp style collars
The screw shaft clamp style collar is a basic machine component, which is attached to the shaft via multiple screws. These collars act as mechanical stops, load bearing faces, or load transfer points. Their simple design makes them easy to install. This article will discuss the pros and cons of this style of collar. Let’s look at what you need to know before choosing a screw shaft clamp style collar. Here are some things to keep in mind.
Clamp-style shaft collars are a versatile mounting option for shafts. They have a recessed screw that fully engages the thread for secure locking. Screw shaft clamp collars come in different styles and can be used in both drive and power transmission applications. Listed below are the main differences between these 2 styles of collars. They are compatible with all types of shafts and are able to handle axial loads of up to 5500 pounds.
Clamp-style shaft collars are designed to prevent the screw from accidentally damaging the shaft when tightened. They can be tightened with a set screw to counteract the initial clamping force and prevent the shaft from coming loose. However, when tightening the screw, you should use a torque wrench. Using a set screw to tighten a screw shaft collar can cause it to warp and reduce the surface area that contacts the shaft.
Another key advantage to Clamp-style shaft collars is that they are easy to install. Clamp-style collars are available in one-piece and two-piece designs. These collars lock around the shaft and are easy to remove and install. They are ideal for virtually any shaft and can be installed without removing any components. This type of collar is also recommended for those who work on machines with sensitive components. However, be aware that the higher the OD, the more difficult it is to install and remove the collar.
Screw shaft clamp style collars are usually one-piece. A two-piece collar is easier to install than a one-piece one. The two-piece collars provide a more effective clamping force, as they use the full seating torque. Two-piece collars have the added benefit of being easy to install because they require no tools to install. You can disassemble one-piece collars before installing a two-piece collar.
Ball screw nut
The proper installation of a ball screw nut requires that the nut be installed on the center of the screw shaft. The return tubes of the ball nut must be oriented upward so that the ball nut will not overtravel. The adjusting nut must be tightened against a spacer or spring washer, then the nut is placed on the screw shaft. The nut should be rotated several times in both directions to ensure that it is centered.
Ball screw nuts are typically manufactured with a wide range of preloads. Large preloads are used to increase the rigidity of a ball screw assembly and prevent backlash, the lost motion caused by a clearance between the ball and nut. Using a large amount of preload can lead to excessive heat generation. The most common preload for ball screw nuts is 1 to 3%. This is usually more than enough to prevent backlash, but a higher preload will increase torque requirements.
The diameter of a ball screw is measured from its center, called the ball circle diameter. This diameter represents the distance a ball will travel during 1 rotation of the screw shaft. A smaller diameter means that there are fewer balls to carry the load. Larger leads mean longer travels per revolution and higher speeds. However, this type of screw cannot carry a greater load capacity. Increasing the length of the ball nut is not practical, due to manufacturing constraints.
The most important component of a ball screw is a ball bearing. This prevents excessive friction between the ball and the nut, which is common in lead-screw and nut combinations. Some ball screws feature preloaded balls, which avoid “wiggle” between the nut and the ball. This is particularly desirable in applications with rapidly changing loads. When this is not possible, the ball screw will experience significant backlash.
A ball screw nut can be either single or multiple circuits. Single or multiple-circuit ball nuts can be configured with 1 or 2 independent closed paths. Multi-circuit ball nuts have 2 or more circuits, making them more suitable for heavier loads. Depending on the application, a ball screw nut can be used for small clearance assemblies and compact sizes. In some cases, end caps and deflectors may be used to feed the balls back to their original position.
