Product Description
High efficiency profession 4 wheel diesel engine drive peanut cropper harvester/ earth pea harvesting reaping machine
Product Description
cropper harvester
1.Sealed cab,reduce the noise, make driver feel more comfortable.
2.Using centrifugal fan to feed grass, has good separation effect, and get cleaner forage.
3.The air current throwing mode is adopted for soil block cleaning,it prevents clogging and reduce the rate of broken peanut.
4.The machine has 2 tanks, 1 tank for the peanut, the other tank for the peanut stalk which will be crushed as forage.
5.Removing dust downward,reduce the dust to extend the working life.
6.The picker uses a double track to run smoothly,adopts the circulation mode picking device,improve picking efficiency.
7.The picker height ,roller speed and fan are visual by digital display.
8.Famous brand engine,optional 120/130/140hp, more powerful, more economical, more energy-saving, and more environment protection.
9.It adopts D3.5 type large clutch gearbox,which is reliable and durable.It has long clutch arm to save energy.
10.Rotary dust cover device to avoid water tank will be high temperature after long time working.
11.Bigger fuel tank;the endurance is longer.Optimize the dydraulic system of the whole machine with high reliability.
cropper harvester
| Self-propelled peanut picking and harvesting machine | |||
| Product model | 4HJL-2.5 | 4HJL-2.5S | |
| model | H 2.5 | H 2.5S | |
| power (kw/hp) | 110/150 | 110/150 | |
| Engine position | Bias | Bias | |
| Pick up width (mm) | 2500 | 2500 | |
| Dimensions (mm) | 6725× 2790 ×3420 | 6725× 2790 ×3420 | |
| Total Weight( kg) | 5250 | 5250 | |
| productivity (hm2/h) | 0.27~0.54 | 0.27~0.54 | |
| Picking form / quantity | Longitudinal axial flow cutter teeth | Longitudinal axial flow cutter teeth | |
| Dimensions of peanut picking roller (mm) | Φ710×2000 | Φ710×2000 | |
| Grain tank capacity (m³) | 2.35 | 2.35 | |
| Rear brake | Standard | / | |
| Four-wheel drive | / | Standard | |
| Optional | Engine configuration | Standard Changchai 152 horsepower engine | Standard Changchai 152 horsepower engine |
| Optional CZPT 110kw/150hp engine plus usd470 | Optional CZPT 110kw/150hp engine plus usd470 | ||
| Optional Quanchai 110kw/150hp without price increase | Optional Quanchai 110kw/150hp without price increase | ||
| Closed side subtraction | Optional closed side reduction, an increase of usd470 | Standard | |
| Dust suppression device | undetermined | undetermined | |
cropper harvester
Spares Parts
Spares Parts Photos cropper harvester
Price Of Peanut Combine Harvester
Product Details of cropper harvester
Certifications
Our company used advanced OEM operating model ,and owns perfect harvester parts outsourcing system and sales service network.The company has more than 300 sales service sits and 150 outsourcing factories across the country.
Corporate Honors of cropper harvester
| High-Tech Enterprise | Science and Technology Enterprises of ZheJiang Province |
| Provincial Technology Center | Municipal Enterprise Technology Center |
| Wheat Combine Harvester Technology Center | 3.15 Quality Assurance Alliance |
| AA Enterprise Credit Evaluation | 2017 Most Influential Brand In Agricultural Machinery Industry |
| Agricultural Industrialization Leading Enterprises | E-commerce Leading Enterprises |
| Outstanding Private Enterprise | Provincial Leading Enterprise Of Scientific And Technological Innovation |
| Provincial High Quality Products | Quality Assurance & Best-selling Brand |
| Quality Management Advanced Enterprise | Leading Enterprise In Mechanized Agriculture &Horticulture Equipment Manufacturing |
| Customer Satisfaction Top 10 Brands | Top 10 Technology Innovation Enterprises |
Company Profile
HangZhou CZPT Harvest Machinery Co., Ltd is a professional combine harvester manufacturing company which integrates product research,spare parts producing ,complete machine assembling and product after-sale service. The company was founded in 1995.The company products has 7 series and in total more than 100 types which cover peanut harvester,wheat harvester,rice harvester,corn harvester ,soybean harvester ,corn seeds harvester and silage harvester.In international market,the products mainly are exported to South Asia,Southeast Asia,West Asia,Africe and Middle Europe.
After Sales Service
1.Training how to install and use the machine,engineers available to service machinery overseas.
2.Warranty period of 1 year since machine arrives destination port. Malfunctions which are caused by machine-self and quality will be responsible for our manufacturer. Other malfunctions which caused by operation mistakes, man-made problems, etc will be responsible for clients-self.
3. Timely response to customers’ problems 7*24 hours, provide in time Feedback tracking and after-sales services to maximize the customer’s satisfactory.
FAQ
Q1.How long is the delivery date?
A:In general, we can ship the goods within 15 days after receiving your payment. Of course, it also depends on your quantity.
Q2. How can I visit your factory?
A:We are located in HangZhou city,middle of China,Airport&High-speed train, the transportation is very convenient
Q3: What’s your main products?
A: Our products are covered rice&wheat combine harvester,corn harvester and peanut harvester.
Q4. What is your terms of payment?
A: T/T, L/C, Paypal,Western Union
Q 5: How is the quality of the harvesrter?
A : We are an experienced manufacturer which has been in this field for 30 more years, and can supply high quality harvesters for you.
Worm Gear Motors
Worm gear motors are often preferred for quieter operation because of the smooth sliding motion of the worm shaft. Unlike gear motors with teeth, which may click as the worm turns, worm gear motors can be installed in a quiet area. In this article, we will talk about the CZPT whirling process and the various types of worms available. We’ll also discuss the benefits of worm gear motors and worm wheel.
worm gear
In the case of a worm gear, the axial pitch of the ring pinion of the corresponding revolving worm is equal to the circular pitch of the mating revolving pinion of the worm gear. A worm with 1 start is known as a worm with a lead. This leads to a smaller worm wheel. Worms can work in tight spaces because of their small profile.
Generally, a worm gear has high efficiency, but there are a few disadvantages. Worm gears are not recommended for high-heat applications because of their high level of rubbing. A full-fluid lubricant film and the low wear level of the gear reduce friction and wear. Worm gears also have a lower wear rate than a standard gear. The worm shaft and worm gear is also more efficient than a standard gear.
The worm gear shaft is cradled within a self-aligning bearing block that is attached to the gearbox casing. The eccentric housing has radial bearings on both ends, enabling it to engage with the worm gear wheel. The drive is transferred to the worm gear shaft through bevel gears 13A, 1 fixed at the ends of the worm gear shaft and the other in the center of the cross-shaft.
worm wheel
In a worm gearbox, the pinion or worm gear is centered between a geared cylinder and a worm shaft. The worm gear shaft is supported at either end by a radial thrust bearing. A gearbox’s cross-shaft is fixed to a suitable drive means and pivotally attached to the worm wheel. The input drive is transferred to the worm gear shaft 10 through bevel gears 13A, 1 of which is fixed to the end of the worm gear shaft and the other at the centre of the cross-shaft.
Worms and worm wheels are available in several materials. The worm wheel is made of bronze alloy, aluminum, or steel. Aluminum bronze worm wheels are a good choice for high-speed applications. Cast iron worm wheels are cheap and suitable for light loads. MC nylon worm wheels are highly wear-resistant and machinable. Aluminum bronze worm wheels are available and are good for applications with severe wear conditions.
When designing a worm wheel, it is vital to determine the correct lubricant for the worm shaft and a corresponding worm wheel. A suitable lubricant should have a kinematic viscosity of 300 mm2/s and be used for worm wheel sleeve bearings. The worm wheel and worm shaft should be properly lubricated to ensure their longevity.
Multi-start worms
A multi-start worm gear screw jack combines the benefits of multiple starts with linear output speeds. The multi-start worm shaft reduces the effects of single start worms and large ratio gears. Both types of worm gears have a reversible worm that can be reversed or stopped by hand, depending on the application. The worm gear’s self-locking ability depends on the lead angle, pressure angle, and friction coefficient.
A single-start worm has a single thread running the length of its shaft. The worm advances 1 tooth per revolution. A multi-start worm has multiple threads in each of its threads. The gear reduction on a multi-start worm is equal to the number of teeth on the gear minus the number of starts on the worm shaft. In general, a multi-start worm has 2 or 3 threads.
Worm gears can be quieter than other types of gears because the worm shaft glides rather than clicking. This makes them an excellent choice for applications where noise is a concern. Worm gears can be made of softer material, making them more noise-tolerant. In addition, they can withstand shock loads. Compared to gears with toothed teeth, worm gears have a lower noise and vibration rate.
CZPT whirling process
The CZPT whirling process for worm shafts raises the bar for precision gear machining in small to medium production volumes. The CZPT whirling process reduces thread rolling, increases worm quality, and offers reduced cycle times. The CZPT LWN-90 whirling machine features a steel bed, programmable force tailstock, and five-axis interpolation for increased accuracy and quality.
Its 4,000-rpm, 5-kW whirling spindle produces worms and various types of screws. Its outer diameters are up to 2.5 inches, while its length is up to 20 inches. Its dry-cutting process uses a vortex tube to deliver chilled compressed air to the cutting point. Oil is also added to the mixture. The worm shafts produced are free of undercuts, reducing the amount of machining required.
Induction hardening is a process that takes advantage of the whirling process. The induction hardening process utilizes alternating current (AC) to cause eddy currents in metallic objects. The higher the frequency, the higher the surface temperature. The electrical frequency is monitored through sensors to prevent overheating. Induction heating is programmable so that only certain parts of the worm shaft will harden.
Common tangent at an arbitrary point on both surfaces of the worm wheel
A worm gear consists of 2 helical segments with a helix angle equal to 90 degrees. This shape allows the worm to rotate with more than 1 tooth per rotation. A worm’s helix angle is usually close to 90 degrees and the body length is fairly long in the axial direction. A worm gear with a lead angle g has similar properties as a screw gear with a helix angle of 90 degrees.
The axial cross section of a worm gear is not conventionally trapezoidal. Instead, the linear part of the oblique side is replaced by cycloid curves. These curves have a common tangent near the pitch line. The worm wheel is then formed by gear cutting, resulting in a gear with 2 meshing surfaces. This worm gear can rotate at high speeds and still operate quietly.
A worm wheel with a cycloid pitch is a more efficient worm gear. It reduces friction between the worm and the gear, resulting in greater durability, improved operating efficiency, and reduced noise. This pitch line also helps the worm wheel engage more evenly and smoothly. Moreover, it prevents interference with their appearance. It also makes worm wheel and gear engagement smoother.
Calculation of worm shaft deflection
There are several methods for calculating worm shaft deflection, and each method has its own set of disadvantages. These commonly used methods provide good approximations but are inadequate for determining the actual worm shaft deflection. For example, these methods do not account for the geometric modifications to the worm, such as its helical winding of teeth. Furthermore, they overestimate the stiffening effect of the gearing. Hence, efficient thin worm shaft designs require other approaches.
Fortunately, several methods exist to determine the maximum worm shaft deflection. These methods use the finite element method, and include boundary conditions and parameter calculations. Here, we look at a couple of methods. The first method, DIN 3996, calculates the maximum worm shaft deflection based on the test results, while the second one, AGMA 6022, uses the root diameter of the worm as the equivalent bending diameter.
The second method focuses on the basic parameters of worm gearing. We’ll take a closer look at each. We’ll examine worm gearing teeth and the geometric factors that influence them. Commonly, the range of worm gearing teeth is 1 to four, but it can be as large as twelve. Choosing the teeth should depend on optimization requirements, including efficiency and weight. For example, if a worm gearing needs to be smaller than the previous model, then a small number of teeth will suffice.
