Product Description

Hansel shopping mall mini electric tourist train rides

HangZhou Hansel company are in the business of amusement/entertainment rides for children. We are a professional train amusement rides manufacturer in HangZhou, China. We lease electronic batterytrain amusement rides to people who are interested in owning and operating their own mall /game center, amusement park business.

Trackless train is a kind of popular amusement park train usually applied in theme park , amusement park, scenic area or shopping mall. It usually consists of a locomotive and several train carriages which are connected by a hinge. And each carriage is mounted with 4 pneumatic tires without track for running. A commander can drive the locomotive to drag tourists in the following carriages on cement road, asphalt road or indoor playground. As a transportation tool and tourism tool , trackless train is a perfect choice for visitors who expect more fantastic scene or are reluctant to walk due to tiredness. In addition, they are an important tourist attraction due to special shapes and passenger-carrying functions.
 

 

 Product specifications of amusement park trains for sale

Material:	fiber glass with car oil painting
Battery:	lead – acid battery
charging time:	8-10 hours
Passengers:	Normally 18-24 seats, some small train with 12 seats
Max Speed:	8KM/H
Tuning diameter:	3M
Players:	both kids and adults
Power:	3KW
Light:	LED lights
train type :	trackless train

 

Product features of amusement park trains for sale

1)Fiber glass body of amusement park trains can be used indoor and outdoor .

2)Our amusement park trains is climbing 30 degree hieght, 90 degree turning, turning radius within 3 meters. And carriage trace is same with the front head. 

3)We use high frenquency non carbon brush and big motor to save power. It is no need to change carbon  brush. 

4)Our amusement park trains use oil power brake for safety. 

5)Our amusement park train are with luxury designs and smoke fog, train horns, vedio recorder, hand bell, MP3 and speaker, etc. 

 

 FAQ of amusement park trains for sale

1). Electrical requirements for train

Working Volt:DC60V
Electric Current:DC<25A
Battery:lead -acid battery
Charging time:8-10 hours
Distance per charge: 80-100KM(10-12hours)
Power :3KW

2). Loading capacity for track trains

Most trains are for 18 passengers. Max load Capacity 1150KG.

3). Power electricity 

Work with battery

4).Our electric train include:

lighting, music, speakers, foot brake, handbrake, steering wheel, throttle, turn signal

5).Length of the train:

Can be customized according to the actual site to increase or decrease train set

6).The floor requirements:

The trackless train can be put on anything flat floor. If to be put in the shopping mall, game center, in order to cut down operating noise and also to protect the floor surface, some floor covering needs to be installed.

7).Used place:Indoor or outdoor

 

Package and delivery of amusement park trains

We make safe package to protect the trains during shipping. 

For whole container shipment: stretch film + air bubble

LCL shipment : Stretch film + air bubble + wood 
There are different train types :

Hansel main cataloges

 

Worm Shafts and Gearboxes

If you have a gearbox, you may be wondering what the best Worm Shaft is for your application. There are several things to consider, including the Concave shape, Number of threads, and Lubrication. This article will explain each factor and help you choose the right Worm Shaft for your gearbox. There are many options available on the market, so don’t hesitate to shop around. If you are new to the world of gearboxes, read on to learn more about this popular type of gearbox.

Concave shape

The geometry of a worm gear varies considerably depending on its manufacturer and its intended use. Early worms had a basic profile that resembled a screw thread and could be chased on a lathe. Later, tools with a straight sided g-angle were developed to produce threads that were parallel to the worm’s axis. Grinding was also developed to improve the finish of worm threads and minimize distortions that occur with hardening.
To select a worm with the proper geometry, the diameter of the worm gear must be in the same unit as the worm’s shaft. Once the basic profile of the worm gear is determined, the worm gear teeth can be specified. The calculation also involves an angle for the worm shaft to prevent it from overheating. The angle of the worm shaft should be as close to the vertical axis as possible.
Double-enveloping worm gears, on the other hand, do not have a throat around the worm. They are helical gears with a straight worm shaft. Since the teeth of the worm are in contact with each other, they produce significant friction. Unlike double-enveloping worm gears, non-throated worm gears are more compact and can handle smaller loads. They are also easy to manufacture.
The worm gears of different manufacturers offer many advantages. For instance, worm gears are 1 of the most efficient ways to increase torque, while lower-quality materials like bronze are difficult to lubricate. Worm gears also have a low failure rate because they allow for considerable leeway in the design process. Despite the differences between the 2 standards, the overall performance of a worm gear system is the same.
The cone-shaped worm is another type. This is a technological scheme that combines a straight worm shaft with a concave arc. The concave arc is also a useful utility model. Worms with this shape have more than 3 contacts at the same time, which means they can reduce a large diameter without excessive wear. It is also a relatively low-cost model.

Thread pattern

A good worm gear requires a perfect thread pattern. There are a few key parameters that determine how good a thread pattern is. Firstly, the threading pattern must be ACME-threaded. If this is not possible, the thread must be made with straight sides. Then, the linear pitch of the “worm” must be the same as the circular pitch of the corresponding worm wheel. In simple terms, this means the pitch of the “worm” is the same as the circular pitch of the worm wheel. A quick-change gearbox is usually used with this type of worm gear. Alternatively, lead-screw change gears are used instead of a quick-change gear box. The pitch of a worm gear equals the helix angle of a screw.
A worm gear’s axial pitch must match the circular pitch of a gear with a higher axial pitch. The circular pitch is the distance between the points of teeth on the worm, while the axial pitch is the distance between the worm’s teeth. Another factor is the worm’s lead angle. The angle between the pitch cylinder and worm shaft is called its lead angle, and the higher the lead angle, the greater the efficiency of a gear.
Worm gear tooth geometry varies depending on the manufacturer and intended use. In early worms, threading resembled the thread on a screw, and was easily chased using a lathe. Later, grinding improved worm thread finishes and minimized distortions from hardening. As a result, today, most worm gears have a thread pattern corresponding to their size. When selecting a worm gear, make sure to check for the number of threads before purchasing it.
A worm gear’s threading is crucial in its operation. Worm teeth are typically cylindrical, and are arranged in a pattern similar to screw or nut threads. Worm teeth are often formed on an axis of perpendicular compared to their parallel counterparts. Because of this, they have greater torque than their spur gear counterparts. Moreover, the gearing has a low output speed and high torque.

Number of threads

Different types of worm gears use different numbers of threads on their planetary gears. A single threaded worm gear should not be used with a double-threaded worm. A single-threaded worm gear should be used with a single-threaded worm. Single-threaded worms are more effective for speed reduction than double-threaded ones.
The number of threads on a worm’s shaft is a ratio that compares the pitch diameter and number of teeth. In general, worms have 1,2,4 threads, but some have three, five, or six. Counting thread starts can help you determine the number of threads on a worm. A single-threaded worm has fewer threads than a multiple-threaded worm, but a multi-threaded worm will have more threads than a mono-threaded planetary gear.
To measure the number of threads on a worm shaft, a small fixture with 2 ground faces is used. The worm must be removed from its housing so that the finished thread area can be inspected. After identifying the number of threads, simple measurements of the worm’s outside diameter and thread depth are taken. Once the worm has been accounted for, a cast of the tooth space is made using epoxy material. The casting is moulded between the 2 tooth flanks. The V-block fixture rests against the outside diameter of the worm.
The circular pitch of a worm and its axial pitch must match the circular pitch of a larger gear. The axial pitch of a worm is the distance between the points of the teeth on a worm’s pitch diameter. The lead of a thread is the distance a thread travels in 1 revolution. The lead angle is the tangent to the helix of a thread on a cylinder.
The worm gear’s speed transmission ratio is based on the number of threads. A worm gear with a high ratio can be easily reduced in 1 step by using a set of worm gears. However, a multi-thread worm will have more than 2 threads. The worm gear is also more efficient than single-threaded gears. And a worm gear with a high ratio will allow the motor to be used in a variety of applications.

Lubrication

The lubrication of a worm gear is particularly challenging, due to its friction and high sliding contact force. Fortunately, there are several options for lubricants, such as compounded oils. Compounded oils are mineral-based lubricants formulated with 10 percent or more fatty acid, rust and oxidation inhibitors, and other additives. This combination results in improved lubricity, reduced friction, and lower sliding wear.
When choosing a lubricant for a worm shaft, make sure the product’s viscosity is right for the type of gearing used. A low viscosity will make the gearbox difficult to actuate and rotate. Worm gears also undergo a greater sliding motion than rolling motion, so grease must be able to migrate evenly throughout the gearbox. Repeated sliding motions will push the grease away from the contact zone.
Another consideration is the backlash of the gears. Worm gears have high gear ratios, sometimes 300:1. This is important for power applications, but is at the same time inefficient. Worm gears can generate heat during the sliding motion, so a high-quality lubricant is essential. This type of lubricant will reduce heat and ensure optimal performance. The following tips will help you choose the right lubricant for your worm gear.
In low-speed applications, a grease lubricant may be sufficient. In higher-speed applications, it’s best to apply a synthetic lubricant to prevent premature failure and tooth wear. In both cases, lubricant choice depends on the tangential and rotational speed. It is important to follow manufacturer’s guidelines regarding the choice of lubricant. But remember that lubricant choice is not an easy task.