Tag Archives: hot selling air compressor

China best CZPT Direct Drive Fixed Speed Screw Air Compressor Industrial with Hot selling

Product Description

 

Product Description

 

1. ATLAS-COPCO air-end, ensure it’s realiable & safety
2. 2in1: compressor + air tank save place, save cost
3. Free-installation, connect the power then use at once
4. Silence and low vibration
5. Intelligent controller system Choren
6. Protect function: emergency stop, fault shutdown,overheat shutdown, overpressure shutdown to protect users

Model  Max Working Pressure CAPACITY Motor Power Net Weight  Transmission Connection Dimension
(F.A.D) (Lx W x H)
bar psig m3/min hp kw kgs inch mm
LST4N-8 8 116 0.58  4 296 Belt Drive G1/2” 1547*650*1473
LST4N-10 10 145 0.51 
LST5.5N-8 8 116 0.82  7.5  5.5 304 Belt Drive G1/2” 1547*650*1473
LST5.5N-10 10 145 0.68 
LST7.5N-8 8 116 1.13  10 7.5 319 Belt Drive G1/2” 1547*650*1473
LST7.5N-10 10 145 0.90 
LST11TM-7 7 102 1.79  15 11 380 Belt Drive G3/4” 1520*788*1775
LS11TM-8 8 116 1.78 
LS11TM-10 10 145 1.36 
LS15TM-7 7 102 2.30  20 15 428 Belt Drive G3/4” 1520*788*1775
LS15TM-8 8 116 2.20 
LS15TM-10 10 145 2.00 
LS18.5TM-7 7 102 3.00  25 18.5 451 Belt Drive G3/4” 1520*788*1775
LS18.5TM-8 8 116 3.00 
LS18.5TM-10 10 145 2.60 

 

FAQ

Q1: Are you a manufacturer or trading company?
A1: Xihu (West Lake) Dis.in is professional screw air compressor factory located in HangZhou, China, Olymtech is Xihu (West Lake) Dis.in overseas market sales representative.

Q2: Xihu (West Lake) Dis.in is real member of Atlas-copco group?
A2: Yes, in 2571, Sweden Atlas-copco 100% acquired Xihu (West Lake) Dis.in.

Q3: Xihu (West Lake) Dis.in air-end from Atlas-copco?
A3: Yes, Xihu (West Lake) Dis.in LS/LSV, LOH, LSH and CS series air compressors all use Atlas Copco’s air-end.

Q4: What’s your delivery time?
A4: about 10-20days after you confirm the order, other voltage pls contact with us.

Q5: How long is your air compressor warranty?
A5: One year for the whole machine since leave our factory. 

Q6: What’s the payment term?
A6:We accept T/T, LC at sight, Paypal etc.
Also we accept USD, RMB, JPY, EUR, HKD, GBP, CHF, KRW.

Q7: What’s the Min. Order requirement?
A7: 1unit

Q8: What service you can support?
A8: We offer after-sales service, custom service, production view service and one-stop service.

Different parts of the drive shaft

The driveshaft is the flexible rod that transmits torque between the transmission and the differential. The term drive shaft may also refer to a cardan shaft, a transmission shaft or a propeller shaft. Parts of the drive shaft are varied and include:
The driveshaft is a flexible rod that transmits torque from the transmission to the differential

When the driveshaft in your car starts to fail, you should seek professional help as soon as possible to fix the problem. A damaged driveshaft can often be heard. This noise sounds like “tak tak” and is usually more pronounced during sharp turns. However, if you can’t hear the noise while driving, you can check the condition of the car yourself.
The drive shaft is an important part of the automobile transmission system. It transfers torque from the transmission to the differential, which then transfers it to the wheels. The system is complex, but still critical to the proper functioning of the car. It is the flexible rod that connects all other parts of the drivetrain. The driveshaft is the most important part of the drivetrain, and understanding its function will make it easier for you to properly maintain your car.
Driveshafts are used in different vehicles, including front-wheel drive, four-wheel drive, and front-engine rear-wheel drive. Drive shafts are also used in motorcycles, locomotives and ships. Common front-engine, rear-wheel drive vehicle configurations are shown below. The type of tube used depends on the size, speed and strength of the drive shaft.
The output shaft is also supported by the output link, which has 2 identical supports. The upper part of the drive module supports a large tapered roller bearing, while the opposite flange end is supported by a parallel roller bearing. This ensures that the torque transfer between the differentials is efficient. If you want to learn more about car differentials, read this article.
air-compressor

It is also known as cardan shaft, propeller shaft or drive shaft

A propshaft or propshaft is a mechanical component that transmits rotation or torque from an engine or transmission to the front or rear wheels of a vehicle. Because the axes are not directly connected to each other, it must allow relative motion. Because of its role in propelling the vehicle, it is important to understand the components of the driveshaft. Here are some common types.
Isokinetic Joint: This type of joint guarantees that the output speed is the same as the input speed. To achieve this, it must be mounted back-to-back on a plane that bisects the drive angle. Then mount the 2 gimbal joints back-to-back and adjust their relative positions so that the velocity changes at 1 joint are offset by the other joint.
Driveshaft: The driveshaft is the transverse shaft that transmits power to the front wheels. Driveshaft: The driveshaft connects the rear differential to the transmission. The shaft is part of a drive shaft assembly that includes a drive shaft, a slip joint, and a universal joint. This shaft provides rotational torque to the drive shaft.
Dual Cardan Joints: This type of driveshaft uses 2 cardan joints mounted back-to-back. The center yoke replaces the intermediate shaft. For the duplex universal joint to work properly, the angle between the input shaft and the output shaft must be equal. Once aligned, the 2 axes will operate as CV joints. An improved version of the dual gimbal is the Thompson coupling, which offers slightly more efficiency at the cost of added complexity.
air-compressor

It transmits torque at different angles between driveline components

A vehicle’s driveline consists of various components that transmit power from the engine to the wheels. This includes axles, propshafts, CV joints and differentials. Together, these components transmit torque at different angles between driveline components. A car’s powertrain can only function properly if all its components work in harmony. Without these components, power from the engine would stop at the transmission, which is not the case with a car.
The CV driveshaft design provides smoother operation at higher operating angles and extends differential and transfer case life. The assembly’s central pivot point intersects the joint angle and transmits smooth rotational power and surface speed through the drivetrain. In some cases, the C.V. “U” connector. Drive shafts are not the best choice because the joint angles of the “U” joints are often substantially unequal and can cause torsional vibration.
Driveshafts also have different names, including driveshafts. A car’s driveshaft transfers torque from the transmission to the differential, which is then distributed to other driveline components. A power take-off (PTO) shaft is similar to a prop shaft. They transmit mechanical power to connected components. They are critical to the performance of any car. If any of these components are damaged, the entire drivetrain will not function properly.
A car’s powertrain can be complex and difficult to maintain. Adding vibration to the drivetrain can cause premature wear and shorten overall life. This driveshaft tip focuses on driveshaft assembly, operation, and maintenance, and how to troubleshoot any problems that may arise. Adding proper solutions to pain points can extend the life of the driveshaft. If you’re in the market for a new or used car, be sure to read this article.

it consists of several parts

“It consists of several parts” is 1 of 7 small prints. This word consists of 10 letters and is 1 of the hardest words to say. However, it can be explained simply by comparing it to a cow’s kidney. The cocoa bean has several parts, and the inside of the cocoa bean before bursting has distinct lines. This article will discuss the different parts of the cocoa bean and provide a fun way to learn more about the word.
air-compressor

Replacement is expensive

Replacing a car’s driveshaft can be an expensive affair, and it’s not the only part that needs servicing. A damaged drive shaft can also cause other problems. This is why getting estimates from different repair shops is essential. Often, a simple repair is cheaper than replacing the entire unit. Listed below are some tips for saving money when replacing a driveshaft. Listed below are some of the costs associated with repairs:
First, learn how to determine if your vehicle needs a driveshaft replacement. Damaged driveshaft components can cause intermittent or lack of power. Additionally, improperly installed or assembled driveshaft components can cause problems with the daily operation of the car. Whenever you suspect that your car needs a driveshaft repair, seek professional advice. A professional mechanic will have the knowledge and experience needed to properly solve the problem.
Second, know which parts need servicing. Check the u-joint bushing. They should be free of crumbs and not cracked. Also, check the center support bearing. If this part is damaged, the entire drive shaft needs to be replaced. Finally, know which parts to replace. The maintenance cost of the drive shaft is significantly lower than the maintenance cost. Finally, determine if the repaired driveshaft is suitable for your vehicle.
If you suspect your driveshaft needs service, make an appointment with a repair shop as soon as possible. If you are experiencing vibration and rough riding, driveshaft repairs may be the best way to prevent costly repairs in the future. Also, if your car is experiencing unusual noise and vibration, a driveshaft repair may be a quick and easy solution. If you don’t know how to diagnose a problem with your car, you can take it to a mechanic for an appointment and a quote.

China best CZPT Direct Drive Fixed Speed Screw Air Compressor Industrial   with Hot sellingChina best CZPT Direct Drive Fixed Speed Screw Air Compressor Industrial   with Hot selling

China best Hot Selling Oilless 30HP 22kw Energy Saving Frequency Drive Screw Air Compressors Compressor with Permanent Magnet Motor with high quality

Product Description

AirHorse Promises Every Machine Will Run Well More Than 15 Years

Features Of PMSP Inverter Screw Air Compressor

1. Air end with high-efficiency

2. Double Screw with low noise, Super Silenced Enclosure

3. Elegant compact design. Fully open access door to inner parts for easy service.

4. 100% Continuous duty operation. Load/No Load operation

5. High quality CE Certificate industrial electric motors. ISO,CE,UL Certificate

6. Easy to use and read LCD control panel

7. High temperature, high pressure and anti-rotation shutdown

8. Energy efficient operation

9. 5 micron, water-resistant air filtration material

10. 1year full machine warranty,3years air end warranty.

11. Supply the machine with different working voltage according to customer’s request,

such as: 380Volt,3phase,50hz

420Volt,3phase,50hz

380Volt,3phase,60hz

220Volt,3phase and 60hz, etc.
 

Technical Specifications of PMSM Frequency Compressor
Model Motor power Exhaust pressure Air flow Air flow Size Weight
KW Mpa m³/min CFM (L×W×H)mm Kg
EPM-10A 7.5 0.8 1.1 39  950*650*900 260
1 0.9 32 
EPM-20A 15 0.8 2.3 81  1160*700*1100 350
1 2 71 
EPM-30A 22 0.8 3.8 134  1200*900*1150 530
1 3.6 127 
EPM-40A 30 0.8 5.2 184  1400*900*1225 630
1 4.8 169 
EPM-50A 37 0.8 6.5 230  1560*1000*1365 750
1 5.7 201 
EPM-60A 45 0.8 7.5 265  1560*1000*1365 830
1 6.8 240 
EPM-75A 55 0.8 10.5 371  1800*1070*1490 1120
1 8.9 314 
EPM-100A 75 0.8 13.5 477  1800*1070*1490 1290
1 11.5 406 
EPM-120A 90 0.8 16.5 583  2100*1400*1780 1900
1 13.7 484 
EPM-150A 110 0.8 20.5 724  2500*1450*1800 2300
1 17.9 632 
EPM-175A 132 0.8 24 847  2700*1550*1800 3500
1 21.3 752 
EPM-220A 160 0.8 28.5 1006  2700*1550*1800 3800
1 25.5 900 

Product display

Air Compressor Parts

AirHorse Screw Air Compressor Main Configuration
Item Parts Brand
1 Air end GU(Germany origin)
2 Intake Valve Red star(Chian)
3 Solenoid Valve CEME (Italy)
4 Temperature sensor Red star (China)
5 Pressure sensor Huba original (from Switzerland)
6 Motor Xihu (West Lake) Dis.g Motor( China)
7 Coupling Germany KTR
8 Thermostat Valve Italy VMC
9 PLC Schneider Electric (France)
10 Minimal Pressure Valve Red star(Chian)
11 Air filter element Germany MANN
12 Oil filter element Germany MANN
13 Oil separator element Germany MANN
14 Bearing Sweden SKF

 

Why choose us

HangZhou AirHorse Compressor co., ltd is the professional manufacturing and exporter.We are a factory in HangZhou, China.We are specialized in air compressor research, development and production. The main products including screw air compressor, and air dryer etc. We do many OEM for international famous brand such as CZPT Rand.

 

We have obtained the approval of ISO9001-2000 international quality management system, ISO14001 Enviroment management system authentication, CE quality system, ASME quality system etc.

Packaging and Shipping

AirHorse compressor made each air compressor will be through various tests, only test run successful machine, will enter the next process: cleaning and packing, our packing is to adopt international standards and according to the customer’s requirements of transport equipment, in order to protect our machine can intact meet customer’s hands, transportation will be without the mode of transportation: by sea, air, train, car traffic, etc.

After-sale Service

• Guarantee time: 3 years for the air end, and 1 year for the whole machine.

• Any questions or requests before, during or after sales, we would like to help you any time and will find you the best solution in 24 hours.

• Warranty: One year for the whole machine Genuine spare parts will be provided with best price.

• Over board engineer service is available.

Overseas Engineer Service

• We are available to send our engineer for aboard service. Only need you to arrange the accommodation, transportation and translator. Extra cost for each will be discussed based on local price level.

Machinery Exhibition

Our Team

Special Customized Service

1) Full OEM
• Quantity: at least 5 pcs
• In this plan, we will do all the changes (Color, name plate and logo) as your need, and will not charge extra fee.

2) Half OEM
• Quantity: no limit
• Under this program, we can make the necessary alteration (name plate and logo) but we will charge some extra fee for the name plate, as the name plate factory has the MOQ.

3) Logo OEM
• Quantity: no limit
• Only the logo will be changed to yours, and no extra fee will be charged.

FAQ

Q1: Warranty terms of your machine?
A1: One year warranty for the machine and technical support according to your needs.

Q2: Will you provide some spare parts of the machines?
A2: Yes, of course.

Q3: What about product package?
A3: We pack our products strictly with standard seaworthy case.

Q4: Can you use our brand?
A4: Yes, OEM is available.

Q5: How long will you take to arrange production?
A5: Immediate delivery for stock products.380V 50HZ we can delivery the goods within 3-15 days. Other voltage or other color we will delivery within 25-30 days.

Q6: How Many Staff Are There In your Factory?
A6: About 100.

Q7: What’s your factory’s production capacity?
A7: About 550-650 units per month.

Q8: What the exactly address of your factory?
A8: Our company is located in AirHorse Industrial Park, Xihu (West Lake) Dis. District, HangZhou, ZheJiang , China.
 

Hello,my friend, I’m an air compressor manufacturer in China.We do many OEM for international famous brand such as CZPT Rand.

This price is the recommended market price. For specific prices and delivery dates, please click “Contact Supplier” to send us an inquiry, and tell us what power, pressure and voltage you need, and we will provide you with the best price. Thank you!

 

Types of Screw Shafts

Screw shafts come in various types and sizes. These types include fully threaded, Lead, and Acme screws. Let’s explore these types in more detail. What type of screw shaft do you need? Which 1 is the best choice for your project? Here are some tips to choose the right screw:

Machined screw shaft

The screw shaft is a basic piece of machinery, but it can be further customized depending on the needs of the customer. Its features include high-precision threads and ridges. Machined screw shafts are generally manufactured using high-precision CNC machines or lathes. The types of screw shafts available vary in shape, size, and material. Different materials are suitable for different applications. This article will provide you with some examples of different types of screw shafts.
Ball screws are used for a variety of applications, including mounting machines, liquid crystal devices, measuring devices, and food and medical equipment. Various shapes are available, including miniature ball screws and nut brackets. They are also available without keyway. These components form a high-accuracy feed mechanism. Machined screw shafts are also available with various types of threaded ends for ease of assembly. The screw shaft is an integral part of linear motion systems.
When you need a machined screw shaft, you need to know the size of the threads. For smaller machine screws, you will need a mating part. For smaller screw sizes, the numbers will be denominated as industry Numeric Sizes. These denominations are not metric, but rather in mm, and they may not have a threads-per-inch designation. Similarly, larger machine screws will usually have threads that have a higher pitch than those with a lower pitch.
Another important feature of machine screws is that they have a thread on the entire shaft, unlike their normal counterparts. These machine screws have finer threads and are intended to be screwed into existing tapped holes using a nut. This means that these screws are generally stronger than other fasteners. They are usually used to hold together electronic components, industrial equipment, and engines. In addition to this, machine screws are usually made of a variety of materials.
screwshaft

Acme screw

An Acme screw is the most common type of threaded shaft available. It is available in a variety of materials including stainless steel and carbon steel. In many applications, it is used for large plates in crushing processes. ACME screws are self-locking and are ideal for applications requiring high clamping force and low friction. They also feature a variety of standard thread forms, including knurling and rolled worms.
Acme screws are available in a wide range of sizes, from 1/8″ to 6″. The diameter is measured from the outside of the screw to the bottom of the thread. The pitch is equal to the lead in a single start screw. The lead is equal to the pitch plus the number of starts. A screw of either type has a standard pitch and a lead. Acme screws are manufactured to be accurate and durable. They are also widely available in a wide range of materials and can be customized to fit your needs.
Another type of Acme screw is the ball screw. These have no back drive and are widely used in many applications. Aside from being lightweight, they are also able to move at faster speeds. A ball screw is similar to an Acme screw, but has a different shape. A ball screw is usually longer than an Acme screw. The ball screw is used for applications that require high linear speeds. An Acme screw is a common choice for many industries.
There are many factors that affect the speed and resolution of linear motion systems. For example, the nut position and the distance the screw travels can all affect the resolution. The total length of travel, the speed, and the duty cycle are all important. The lead size will affect the maximum linear speed and force output. If the screw is long, the greater the lead size, the higher the resolution. If the lead length is short, this may not be the most efficient option.
screwshaft

Lead screw

A lead screw is a threaded mechanical device. A lead screw consists of a cylindrical shaft, which includes a shallow thread portion and a tightly wound spring wire. This spring wire forms smooth, hard-spaced thread convolutions and provides wear-resistant engagement with the nut member. The wire’s leading and trailing ends are anchored to the shaft by means appropriate to the shaft’s composition. The screw is preferably made of stainless steel.
When selecting a lead screw, 1 should first determine its critical speed. The critical speed is the maximum rotations per minute based on the natural frequency of the screw. Excessive backlash will damage the lead screw. The maximum number of revolutions per minute depends on the screw’s minor diameter, length, assembly alignment, and end fixity. Ideally, the critical speed is 80% of its evaluated critical speed. A critical speed is not exceeded because excessive backlash would damage the lead screw and may be detrimental to the screw’s performance.
The PV curve defines the safe operating limits of a lead screw. This relationship describes the inverse relationship between contact surface pressure and sliding velocity. As the PV value increases, a lower rotation speed is required for heavier axial loads. Moreover, PV is affected by material and lubrication conditions. Besides, end fixity, which refers to the way the lead screw is supported, also affects its critical speed. Fixed-fixed and free end fixity are both possible.
Lead screws are widely used in industries and everyday appliances. In fact, they are used in robotics, lifting equipment, and industrial machinery. High-precision lead screws are widely used in the fields of engraving, fluid handling, data storage, and rapid prototyping. Moreover, they are also used in 3D printing and rapid prototyping. Lastly, lead screws are used in a wide range of applications, from measuring to assembly.

Fully threaded screw

A fully threaded screw shaft can be found in many applications. Threading is an important feature of screw systems and components. Screws with threaded shafts are often used to fix pieces of machinery together. Having fully threaded screw shafts ensures that screws can be installed without removing the nut or shaft. There are 2 major types of screw threads: coarse and fine. When it comes to coarse threads, UTS is the most common type, followed by BSP.
In the 1840s, a British engineer named Joseph Whitworth created a design that was widely used for screw threads. This design later became the British Standard Whitworth. This standard was used for screw threads in the United States during the 1840s and 1860s. But as screw threads evolved and international standards were established, this system remained largely unaltered. A new design proposed in 1864 by William Sellers improved upon Whitworth’s screw threads and simplified the pitch and surface finish.
Another reason for using fully threaded screws is their ability to reduce heat. When screw shafts are partially threaded, the bone grows up to the screw shaft and causes the cavity to be too narrow to remove it. Consequently, the screw is not capable of backing out. Therefore, fully threaded screws are the preferred choice for inter-fragmentary compression in children’s fractures. However, surgeons should know the potential complication when removing metalwork.
The full thread depth of a fully threaded screw is the distance at which a male thread can freely thread into the shaft. This dimension is typically 1 millimeter shy of the total depth of the drilled hole. This provides space for tap lead and chips. The full-thread depth also makes fully threaded screws ideal for axially-loaded connections. It is also suitable for retrofitting applications. For example, fully threaded screws are commonly used to connect 2 elements.
screwshaft

Ball screw

The basic static load rating of a ball screw is determined by the product of the maximum axial static load and the safety factor “s0”. This factor is determined by past experience in similar applications and should be selected according to the design requirements of the application. The basic static load rating is a good guideline for selecting a ball screw. There are several advantages to using a ball screw for a particular application. The following are some of the most common factors to consider when selecting a ball screw.
The critical speed limit of a ball screw is dependent on several factors. First of all, the critical speed depends on the mass, length and diameter of the shaft. Second, the deflection of the shaft and the type of end bearings determine the critical speed. Finally, the unsupported length is determined by the distance between the ball nut and end screw, which is also the distance between bearings. Generally, a ball screw with a diameter greater than 1.2 mm has a critical speed limit of 200 rpm.
The first step in manufacturing a high-quality ball screw is the choice of the right steel. While the steel used for manufacturing a ball screw has many advantages, its inherent quality is often compromised by microscopic inclusions. These microscopic inclusions may eventually lead to crack propagation, surface fatigue, and other problems. Fortunately, the technology used in steel production has advanced, making it possible to reduce the inclusion size to a minimum. However, higher-quality steels can be expensive. The best material for a ball screw is vacuum-degassed pure alloy steel.
The lead of a ball screw shaft is also an important factor to consider. The lead is the linear distance between the ball and the screw shaft. The lead can increase the amount of space between the balls and the screws. In turn, the lead increases the speed of a screw. If the lead of a ball screw is increased, it may increase its accuracy. If not, the lead of a ball screw can be improved through preloading, lubrication, and better mounting accuracy.

China best Hot Selling Oilless 30HP 22kw Energy Saving Frequency Drive Screw Air Compressors Compressor with Permanent Magnet Motor   with high qualityChina best Hot Selling Oilless 30HP 22kw Energy Saving Frequency Drive Screw Air Compressors Compressor with Permanent Magnet Motor   with high quality

China Hot selling Oil Free Direct Drive AC Power Oilless Screw Air Compressor For Sale near me supplier

Product Description

Screw type air compressor structure of a unique design, a compact, stylish appearance, high efficiency, small energy consumption, low noise characteristics and long life, is a smart environment-friendly products. Widely applied in metallurgy, machinery, chemicals, and mining, and electric power industries of the ideal gas source equipment.     
 
Advantage:

1.The third generation of advanced rotor and concise intake control system

2.Efficient centrifugal separator oil and gas, gas oil content is small,tube and core of long life . 

3. Efficient, low noise suction fan of the full use of export dynamic pressure increased effect of heat transfer (air-cooled) 

4. Automatic water-cooling system for large air compressor to provide more efficient 

5.Fault diagnosis system, the control panel is easy to operate 

6. Removable door, equipment maintenance, service convenient 

7.Micro-electronic processing so that temperature, pressure and other parameters are closely monitored .

Technical Parameters:

Model Discharge Pressure Discharge Air Volume Motor Power Noise Dimension(mm) Discharge Pipc.Dia Unit Weight
DEF330W 0.75MPa 9.15m³/min 55KW 80±3 2100x1500x1790 G1-1/2 2600KG
0.85MPa 9.11m³/min
1.05MPa 7.98m³/min
DEF450W 0.75MPa 12.51m³/min 75KW 80±3 2300x1600x1790 DN50 2800KG
0.85MPa 11.60m³/min
1.05MPa 10.81m³/min
DEF505W 0.75MPa 13.39m³/min 90KW 80±3 2300x1600x1790 DN50 3400KG
0.85MPa 13.37m³/min
1.05MPa 12.41m³/min
DEF710W 0.75MPa 19.96m³/min 110KW 82±3 2800x1800x1860 DN65 3450KG
0.85MPa 18.74m³/min
1.05MPa 16.40m³/min
DEF780W 0.75MPa 23.58m³/min 132KW 82±3 2800x1800x1860 DN65 3550KG
0.85MPa 22.13m³/min
1.05MPa 19.89m³/min
DEF950W 0.75MPa 26.85m³/min 160KW 82±3 2800x1800x1860 DN65 3950KG
0.85MPa 25.47m³/min
1.05MPa 23.51m³/min
DEF1060W 0.75MPa 29.73m³/min 185KW 82±3 2800x1800x1860 DN65 4500KG
0.85MPa 29.65m³/min
1.05MPa 26.79m³/min
DEF1180W 0.75MPa 33.49m³/min 200KW 85±3 3100x2150x2200 DN100 5000KG
0.85MPa 33.35m³/min
1.05MPa 29.89m³/min
DEF1270W 0.75MPa 35.97m³/min 220KW 85±3 3100x2150x2200 DN100 5200KG
0.85MPa 35.92m³/min
1.05MPa 33.28m³/min
DEF1510W 0.75MPa 42.85m³/min 250KW 85±3 3100x2150x2200 DN100 6400KG
0.85MPa 42.66m³/min
1.05MPa 38.3m³/min
DEF1650W 0.75MPa 46.73m³/min 280KW 85±3 3400x2400x2200 DN100 6400KG
0.85MPa 45.64m³/min
1.05MPa 42.61m³/min
DEF1815W 0.75MPa 51.41m³/min 315KW 90±3 3400x2400x2200 DN100 6400KG
0.85MPa 51.25m³/min
1.05MPa 46.47m³/min
DEF2060W 0.75MPa 58.44m³/min 355KW 90±3 3400x2400x2200 DN100 6400KG
0.85MPa 57.89m³/min
1.05MPa 50.99m³/min

PRODUCT HIGHLIGHTS

1.Clean air 100% oil-free, class 0 oil free air according to ISO8537-1  
 
2.Technology patent used in oil free compressed air system
 
3.Significant energy saving, environmental-friendly and pollution-free
 
4.Low operation and maintenance cost
 
5.Powerful MAM microcomputer controller and touch screen
 
6.Designed especially for medical, pharmacy, instrument, coating, chemical industry and food processing, etc. 

Product Applications:

Our Exhibition

Our service

1.Pre-sale service:

Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments . 
1.Select equipment model.
2.Design and manufacture products according to client’s special requirement ; 
3.Train technical personnel for clients .

2.Services during the sale:

1.Pre-check and accept products ahead of delivery .
2. Help clients to draft solving plans .

3.After-sale services:

Provide considerate services to minimize clients’ worries.
1.Complete After-sales service,professional engineers available to service machinery at home or oversea.
2. 24 hours technical support by e-mail.
3.Other essential technological service.

How to Calculate Stiffness, Centering Force, Wear and Fatigue Failure of Spline Couplings

There are various types of spline couplings. These couplings have several important properties. These properties are: Stiffness, Involute splines, Misalignment, Wear and fatigue failure. To understand how these characteristics relate to spline couplings, read this article. It will give you the necessary knowledge to determine which type of coupling best suits your needs. Keeping in mind that spline couplings are usually spherical in shape, they are made of steel.
splineshaft

Involute splines

An effective side interference condition minimizes gear misalignment. When 2 splines are coupled with no spline misalignment, the maximum tensile root stress shifts to the left by 5 mm. A linear lead variation, which results from multiple connections along the length of the spline contact, increases the effective clearance or interference by a given percentage. This type of misalignment is undesirable for coupling high-speed equipment.
Involute splines are often used in gearboxes. These splines transmit high torque, and are better able to distribute load among multiple teeth throughout the coupling circumference. The involute profile and lead errors are related to the spacing between spline teeth and keyways. For coupling applications, industry practices use splines with 25 to 50-percent of spline teeth engaged. This load distribution is more uniform than that of conventional single-key couplings.
To determine the optimal tooth engagement for an involved spline coupling, Xiangzhen Xue and colleagues used a computer model to simulate the stress applied to the splines. The results from this study showed that a “permissible” Ruiz parameter should be used in coupling. By predicting the amount of wear and tear on a crowned spline, the researchers could accurately predict how much damage the components will sustain during the coupling process.
There are several ways to determine the optimal pressure angle for an involute spline. Involute splines are commonly measured using a pressure angle of 30 degrees. Similar to gears, involute splines are typically tested through a measurement over pins. This involves inserting specific-sized wires between gear teeth and measuring the distance between them. This method can tell whether the gear has a proper tooth profile.
The spline system shown in Figure 1 illustrates a vibration model. This simulation allows the user to understand how involute splines are used in coupling. The vibration model shows 4 concentrated mass blocks that represent the prime mover, the internal spline, and the load. It is important to note that the meshing deformation function represents the forces acting on these 3 components.
splineshaft

Stiffness of coupling

The calculation of stiffness of a spline coupling involves the measurement of its tooth engagement. In the following, we analyze the stiffness of a spline coupling with various types of teeth using 2 different methods. Direct inversion and blockwise inversion both reduce CPU time for stiffness calculation. However, they require evaluation submatrices. Here, we discuss the differences between these 2 methods.
The analytical model for spline couplings is derived in the second section. In the third section, the calculation process is explained in detail. We then validate this model against the FE method. Finally, we discuss the influence of stiffness nonlinearity on the rotor dynamics. Finally, we discuss the advantages and disadvantages of each method. We present a simple yet effective method for estimating the lateral stiffness of spline couplings.
The numerical calculation of the spline coupling is based on the semi-analytical spline load distribution model. This method involves refined contact grids and updating the compliance matrix at each iteration. Hence, it consumes significant computational time. Further, it is difficult to apply this method to the dynamic analysis of a rotor. This method has its own limitations and should be used only when the spline coupling is fully investigated.
The meshing force is the force generated by a misaligned spline coupling. It is related to the spline thickness and the transmitting torque of the rotor. The meshing force is also related to the dynamic vibration displacement. The result obtained from the meshing force analysis is given in Figures 7, 8, and 9.
The analysis presented in this paper aims to investigate the stiffness of spline couplings with a misaligned spline. Although the results of previous studies were accurate, some issues remained. For example, the misalignment of the spline may cause contact damages. The aim of this article is to investigate the problems associated with misaligned spline couplings and propose an analytical approach for estimating the contact pressure in a spline connection. We also compare our results to those obtained by pure numerical approaches.

Misalignment

To determine the centering force, the effective pressure angle must be known. Using the effective pressure angle, the centering force is calculated based on the maximum axial and radial loads and updated Dudley misalignment factors. The centering force is the maximum axial force that can be transmitted by friction. Several published misalignment factors are also included in the calculation. A new method is presented in this paper that considers the cam effect in the normal force.
In this new method, the stiffness along the spline joint can be integrated to obtain a global stiffness that is applicable to torsional vibration analysis. The stiffness of bearings can also be calculated at given levels of misalignment, allowing for accurate estimation of bearing dimensions. It is advisable to check the stiffness of bearings at all times to ensure that they are properly sized and aligned.
A misalignment in a spline coupling can result in wear or even failure. This is caused by an incorrectly aligned pitch profile. This problem is often overlooked, as the teeth are in contact throughout the involute profile. This causes the load to not be evenly distributed along the contact line. Consequently, it is important to consider the effect of misalignment on the contact force on the teeth of the spline coupling.
The centre of the male spline in Figure 2 is superposed on the female spline. The alignment meshing distances are also identical. Hence, the meshing force curves will change according to the dynamic vibration displacement. It is necessary to know the parameters of a spline coupling before implementing it. In this paper, the model for misalignment is presented for spline couplings and the related parameters.
Using a self-made spline coupling test rig, the effects of misalignment on a spline coupling are studied. In contrast to the typical spline coupling, misalignment in a spline coupling causes fretting wear at a specific position on the tooth surface. This is a leading cause of failure in these types of couplings.
splineshaft

Wear and fatigue failure

The failure of a spline coupling due to wear and fatigue is determined by the first occurrence of tooth wear and shaft misalignment. Standard design methods do not account for wear damage and assess the fatigue life with big approximations. Experimental investigations have been conducted to assess wear and fatigue damage in spline couplings. The tests were conducted on a dedicated test rig and special device connected to a standard fatigue machine. The working parameters such as torque, misalignment angle, and axial distance have been varied in order to measure fatigue damage. Over dimensioning has also been assessed.
During fatigue and wear, mechanical sliding takes place between the external and internal splines and results in catastrophic failure. The lack of literature on the wear and fatigue of spline couplings in aero-engines may be due to the lack of data on the coupling’s application. Wear and fatigue failure in splines depends on a number of factors, including the material pair, geometry, and lubrication conditions.
The analysis of spline couplings shows that over-dimensioning is common and leads to different damages in the system. Some of the major damages are wear, fretting, corrosion, and teeth fatigue. Noise problems have also been observed in industrial settings. However, it is difficult to evaluate the contact behavior of spline couplings, and numerical simulations are often hampered by the use of specific codes and the boundary element method.
The failure of a spline gear coupling was caused by fatigue, and the fracture initiated at the bottom corner radius of the keyway. The keyway and splines had been overloaded beyond their yield strength, and significant yielding was observed in the spline gear teeth. A fracture ring of non-standard alloy steel exhibited a sharp corner radius, which was a significant stress raiser.
Several components were studied to determine their life span. These components include the spline shaft, the sealing bolt, and the graphite ring. Each of these components has its own set of design parameters. However, there are similarities in the distributions of these components. Wear and fatigue failure of spline couplings can be attributed to a combination of the 3 factors. A failure mode is often defined as a non-linear distribution of stresses and strains.

China Hot selling Oil Free Direct Drive AC Power Oilless Screw Air Compressor For Sale   near me supplier China Hot selling Oil Free Direct Drive AC Power Oilless Screw Air Compressor For Sale   near me supplier

China Custom oil-less screw air compressor with OEM service with Hot selling

Product Description

Screw type air compressor structure of a unique design, a compact, stylish appearance, high efficiency, small energy consumption, low noise characteristics and long life, is a smart environment-friendly products. Is widely applied in metallurgy, machinery, chemicals, and mining, and electric power industries of the ideal gas source equipment.     
 Advantage:
1.The third generation of advanced rotor and concise intake control system
2.Efficient centrifugal separator oil and gas, gas oil content is small,tube and core of long life .
3. Efficient, low noise suction fan of the full use of export dynamic pressure 
  increased effect of heat transfer (air-cooled) 
4. Automatic water-cooling system for large air compressor to provide more efficient.
5.Fault diagnosis system, the control panel is easy to operate 
6 Removable door, equipment maintenance, service convenient 
7.Microelectronic processing so that temperature,pressure and other parameters are closely monitored .
Our SEF Product details:

Product accessories:
1.Brand Screw Host
Large rotors,low rpm,long life span
High efficiency,low noise,low vibration,high reliability
Bearing life over 100,000 hours
Little leakage triangle,low power/airflow ratio
Less wearing parts,low maintenance cost
2.Motor
High efficiency air-cooling totally enclosed motor
Large starting torque
Low noise,better structure
Original imported CZPT bearing
F grade insulation,IP 55 protection level
Low rpm

3.Brand Intake Valve Assembie
Non-load starting,butterfly inlet comtrolling valve
0~100% stepless volume regulation,aluminium alloy unibody casing
With Non-return value for heavy load,piston mover
Non-return value close under urgent stop or power failure

4.Air Filter
Air filter from Mann Hummel Germany
Dust removal 99.9%,filtering fineness 3 μm
Ensuring the clean air for inlet
Prolonging the life span of air system,large size,over 3000 hours

5.Oil System
Oil Filter from Mann Hummel Germany
Reliably removing the dust in oil
Oil fineness less then 0.1 μm
Ensuring the clearness and lubrication of oil system,good cooling function
Aplication Fields:

Our service: 

1. Pre-sale service: 

Act as a good adviser and assistant of clients enable them to get rich and generous returns on their investments. 1. Select equipment model. 2. Design and manufacture products according to client’s special requirement; 3. Train technical personnel for clients. 

2. Services during the sale: 

1. Pre-check and accept products ahead of delivery. 
2. Help clients to draft solving plans. 

3. After-sale services: 
Provide considerate services to minimize clients’ worries. 

1. Complete After-sales service, professional engineers available to service machinery at home or oversea. 
2.24 hours technical support by e-mail. 
3. Other essential technological service. 

How to Replace the Drive Shaft

Several different functions in a vehicle are critical to its functioning, but the driveshaft is probably the part that needs to be understood the most. A damaged or damaged driveshaft can damage many other auto parts. This article will explain how this component works and some of the signs that it may need repair. This article is for the average person who wants to fix their car on their own but may not be familiar with mechanical repairs or even driveshaft mechanics. You can click the link below for more information.
air-compressor

Repair damaged driveshafts

If you own a car, you should know that the driveshaft is an integral part of the vehicle’s driveline. They ensure efficient transmission of power from the engine to the wheels and drive. However, if your driveshaft is damaged or cracked, your vehicle will not function properly. To keep your car safe and running at peak efficiency, you should have it repaired as soon as possible. Here are some simple steps to replace the drive shaft.
First, diagnose the cause of the drive shaft damage. If your car is making unusual noises, the driveshaft may be damaged. This is because worn bushings and bearings support the drive shaft. Therefore, the rotation of the drive shaft is affected. The noise will be squeaks, dings or rattles. Once the problem has been diagnosed, it is time to repair the damaged drive shaft.
Professionals can repair your driveshaft at relatively low cost. Costs vary depending on the type of drive shaft and its condition. Axle repairs can range from $300 to $1,000. Labor is usually only around $200. A simple repair can cost between $150 and $1700. You’ll save hundreds of dollars if you’re able to fix the problem yourself. You may need to spend a few more hours educating yourself about the problem before handing it over to a professional for proper diagnosis and repair.
The cost of repairing a damaged driveshaft varies by model and manufacturer. It can cost as much as $2,000 depending on parts and labor. While labor costs can vary, parts and labor are typically around $70. On average, a damaged driveshaft repair costs between $400 and $600. However, these parts can be more expensive than that. If you don’t want to spend money on unnecessarily expensive repairs, you may need to pay a little more.
air-compressor

Learn how drive shafts work

While a car engine may be 1 of the most complex components in your vehicle, the driveshaft has an equally important job. The driveshaft transmits the power of the engine to the wheels, turning the wheels and making the vehicle move. Driveshaft torque refers to the force associated with rotational motion. Drive shafts must be able to withstand extreme conditions or they may break. Driveshafts are not designed to bend, so understanding how they work is critical to the proper functioning of the vehicle.
The drive shaft includes many components. The CV connector is 1 of them. This is the last stop before the wheels spin. CV joints are also known as “doughnut” joints. The CV joint helps balance the load on the driveshaft, the final stop between the engine and the final drive assembly. Finally, the axle is a single rotating shaft that transmits power from the final drive assembly to the wheels.
Different types of drive shafts have different numbers of joints. They transmit torque from the engine to the wheels and must accommodate differences in length and angle. The drive shaft of a front-wheel drive vehicle usually includes a connecting shaft, an inner constant velocity joint and an outer fixed joint. They also have anti-lock system rings and torsional dampers to help them run smoothly. This guide will help you understand the basics of driveshafts and keep your car in good shape.
The CV joint is the heart of the driveshaft, it enables the wheels of the car to move at a constant speed. The connector also helps transmit power efficiently. You can learn more about CV joint driveshafts by looking at the top 3 driveshaft questions
The U-joint on the intermediate shaft may be worn or damaged. Small deviations in these joints can cause slight vibrations and wobble. Over time, these vibrations can wear out drivetrain components, including U-joints and differential seals. Additional wear on the center support bearing is also expected. If your driveshaft is leaking oil, the next step is to check your transmission.
The drive shaft is an important part of the car. They transmit power from the engine to the transmission. They also connect the axles and CV joints. When these components are in good condition, they transmit power to the wheels. If you find them loose or stuck, it can cause the vehicle to bounce. To ensure proper torque transfer, your car needs to stay on the road. While rough roads are normal, bumps and bumps are common.
air-compressor

Common signs of damaged driveshafts

If your vehicle vibrates heavily underneath, you may be dealing with a faulty propshaft. This issue limits your overall control of the vehicle and cannot be ignored. If you hear this noise frequently, the problem may be the cause and should be diagnosed as soon as possible. Here are some common symptoms of a damaged driveshaft. If you experience this noise while driving, you should have your vehicle inspected by a mechanic.
A clanging sound can also be 1 of the signs of a damaged driveshaft. A ding may be a sign of a faulty U-joint or center bearing. This can also be a symptom of worn center bearings. To keep your vehicle safe and functioning properly, it is best to have your driveshaft inspected by a certified mechanic. This can prevent serious damage to your car.
A worn drive shaft can cause difficulty turning, which can be a major safety issue. Fortunately, there are many ways to tell if your driveshaft needs service. The first thing you can do is check the u-joint itself. If it moves too much or too little in any direction, it probably means your driveshaft is faulty. Also, rust on the bearing cap seals may indicate a faulty drive shaft.
The next time your car rattles, it might be time for a mechanic to check it out. Whether your vehicle has a manual or automatic transmission, the driveshaft plays an important role in your vehicle’s performance. When 1 or both driveshafts fail, it can make the vehicle unsafe or impossible to drive. Therefore, you should have your car inspected by a mechanic as soon as possible to prevent further problems.
Your vehicle should also be regularly lubricated with grease and chain to prevent corrosion. This will prevent grease from escaping and causing dirt and grease to build up. Another common sign is a dirty driveshaft. Make sure your phone is free of debris and in good condition. Finally, make sure the driveshaft chain and cover are in place. In most cases, if you notice any of these common symptoms, your vehicle’s driveshaft should be replaced.
Other signs of a damaged driveshaft include uneven wheel rotation, difficulty turning the car, and increased drag when trying to turn. A worn U-joint also inhibits the ability of the steering wheel to turn, making it more difficult to turn. Another sign of a faulty driveshaft is the shuddering noise the car makes when accelerating. Vehicles with damaged driveshafts should be inspected as soon as possible to avoid costly repairs.

China Custom oil-less screw air compressor with OEM service     with Hot sellingChina Custom oil-less screw air compressor with OEM service     with Hot selling