Tag Archives: machine automatic

China best Automatic Piston Drive Servo Type Plastic and Glass Bottle Honey / Jam / Yogurt Peanut Chocolate Butter Bottling Filling and Sealing Machine near me supplier

Product Description

automatic piston drive servo type Plastic and glass bottle honey / jam / yogurt peanut chocolate butter bottling filling and sealing machine

This automatic servo type viscous liquid filling machine is suitable for various viscous and non viscous and corrosive liquid, widely used in plant oil, chemical liquid, daily chemical industry quantitative small packing filling, linear filling, electromechanical integraton control, replacement of species is quite convenient, unique design, superior performance, other in conformity with the concept of international machinery and equipment.

Using the German SIEMENS(SIEMENS) PLC computer, touch screen control, so that it has an intelligent protection function, vacuum drip device to ensure no leakage phenomenon in the production process. Electric control capacity system, frequency conversion control, photoelectric detection using German TUPK products.

Features

Suitable for material: daily chemical viscosity materials.
1.Accurate measurement: adopt servo control system, ensure the piston can always reaches constant position
2. Variable speed filling: in filling process, when close to target filling capacity can be applied to realize speed slow filling, prevent the liquid spill bottle mouth cause pollution
3. Convenient adjustment: replacement filling specifications only in touch screen can be changed in parameters, and all filling first change in position, fine-tuning dose it in touch screen adjustment Adopt servo motor to descend
4. Selecting the international famous brand electrical components configuration. CZPT Japan PLC computer, omron photoelectric, ZheJiang is produced touch screen, ensure the quality of its outstanding with long-term performance.

Technical parameters

Model	WJ-01	WJ-02	WJ-03	WJ-04	WJ-05	WJ-06	WJ-07
Filling Head(PC)	2	4	6	8	10	12	14
Suitable volume(L)	0.5-6	0.5-6	0.5-6	0.5-6	0.5-6	0.5-6	0.5-6
Productivity (bph)	350-500	700-1000	1000-1500	1500-2200	1800-2500	2000-3000	3000-4000
Work Pressure (MPa)	0.6-0.7	0.6-0.7	0.6-0.7	0.6-0.7	0.6-0.7	0.6-0.7	0.6-0.7
Power consumption(KW)	1.0	1.1	1.5	1.5	1.5	2.0	2.0

Electrical components of our filling machine

	ITEM	SUPPLIER	Brand
1	Touch screen	ZheJiang	WEINVEIW
2	PLC	Japan	Mitsubishi
3	Photo sensor for bottles	Japan	OPTEX
4	solenoid valve	ZheJiang	SHAKO
5	Level button	Mexico	JOHNSON CONTROLS
6	angle seat Valve	Jointed	BURKERT
7	Diving cylinder	ZheJiang	AIRTAC
8	Power button	France	Schneider
9	Button	France	Schneider
10	frequency converter	France	Schneider
11	Magnetic switch	ZheJiang	AIRTAC
12	oil-water separator	ZheJiang	SHAKO
13	Speed reducer	China	Jiao xing
14	Relay	Japan	Omron
15	Servo motor	Japan	Panasonic

Our service

Customized service
We can design the machines according your requirements(material,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.

After-sales service
1.We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly
2.When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.
3.We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.
4.We provide 1 year warranty
5.Well-trained & experienced staff are to answer all your inquiries in English and Chinese
6.24 hours for engineer response (all services part 5days in customer hand by Intl’ courier).
7.12 Months guarantee and life-long technical support.
8.Your business relationship with us will be confidential to any third party.
9.Good after-sale service offered, please get back to us if you got any questions.

HangZhou Proman Machine Co. Ltd,is a production manufacturer and exporter specialized in water treatment plants,beverage filling machine, packing machine, bottle blowing machine, injection moulding machine and spare parts of filling line.
Our factory was established in the year of 1998, with the long history of accumulated experience in filling machine industry in south ZheJiang . There are many development engineers of filling machine in our company. We devote ourselves to the development, research and production of liquid food and beverage packing and filling industry.

Besides, we have our own designs for the bottles.

Proman Machine cooperated with many customers in recent years, we win the trust of customers from our high-quality products. And we are looking forward to the future cooperation with you if our products can impress you deeply!

FAQ

1.Where is your factory?

Our Factory is located in HangZhou City, 2 hours drive from ZheJiang and 1 hour drive from HangZhou(airplane & high-speed rail). If you arrive at ZheJiang or HangZhou, we can pick you up to visit our factory.

2.Do you have any technical supports with your Beverage Filling Machines?
Yes, We have a professional team of engineers who owned many installation, debug and training experiences abroad, are available to service machinery overseas.

3.What’s your guarantee or the warranty of the quality if we buy your machines?

We offer high quality machines with 1 year warranty and supply life-long technical support.
You’re always welcome to visit our company. If you have any interest on our products. Please do not hesitate to contact us.

Screw Shaft Features Explained

When choosing the screw shaft for your application, you should consider the features of the screws: threads, lead, pitch, helix angle, and more. You may be wondering what these features mean and how they affect the screw’s performance. This article explains the differences between these factors. The following are the features that affect the performance of screws and their properties. You can use these to make an informed decision and purchase the right screw. You can learn more about these features by reading the following articles.

Threads

The major diameter of a screw thread is the larger of the 2 extreme diameters. The major diameter of a screw is also known as the outside diameter. This dimension can’t be directly measured, but can be determined by measuring the distance between adjacent sides of the thread. In addition, the mean area of a screw thread is known as the pitch. The diameter of the thread and pitch line are directly proportional to the overall size of the screw.
The threads are classified by the diameter and pitch. The major diameter of a screw shaft has the largest number of threads; the smaller diameter is called the minor diameter. The thread angle, also known as the helix angle, is measured perpendicular to the axis of the screw. The major diameter is the largest part of the screw; the minor diameter is the lower end of the screw. The thread angle is the half distance between the major and minor diameters. The minor diameter is the outer surface of the screw, while the top surface corresponds to the major diameter.
The pitch is measured at the crest of a thread. In other words, a 16-pitch thread has a diameter of 1 sixteenth of the screw shaft’s diameter. The actual diameter is 0.03125 inches. Moreover, a large number of manufacturers use this measurement to determine the thread pitch. The pitch diameter is a critical factor in successful mating of male and female threads. So, when determining the pitch diameter, you need to check the thread pitch plate of a screw.
screwshaft

Lead

In screw shaft applications, a solid, corrosion-resistant material is an important requirement. Lead screws are a robust choice, which ensure shaft direction accuracy. This material is widely used in lathes and measuring instruments. They have black oxide coatings and are suited for environments where rusting is not acceptable. These screws are also relatively inexpensive. Here are some advantages of lead screws. They are highly durable, cost-effective, and offer high reliability.
A lead screw system may have multiple starts, or threads that run parallel to each other. The lead is the distance the nut travels along the shaft during a single revolution. The smaller the lead, the tighter the thread. The lead can also be expressed as the pitch, which is the distance between adjacent thread crests or troughs. A lead screw has a smaller pitch than a nut, and the smaller the lead, the greater its linear speed.
When choosing lead screws, the critical speed is the maximum number of revolutions per minute. This is determined by the minor diameter of the shaft and its length. The critical speed should never be exceeded or the lead will become distorted or cracked. The recommended operational speed is around 80 percent of the evaluated critical speed. Moreover, the lead screw must be properly aligned to avoid excessive vibrations. In addition, the screw pitch must be within the design tolerance of the shaft.

Pitch

The pitch of a screw shaft can be viewed as the distance between the crest of a thread and the surface where the threads meet. In mathematics, the pitch is equivalent to the length of 1 wavelength. The pitch of a screw shaft also relates to the diameter of the threads. In the following, the pitch of a screw is explained. It is important to note that the pitch of a screw is not a metric measurement. In the following, we will define the 2 terms and discuss how they relate to 1 another.
A screw’s pitch is not the same in all countries. The United Kingdom, Canada, and the United States have standardized screw threads according to the UN system. Therefore, there is a need to specify the pitch of a screw shaft when a screw is being manufactured. The standardization of pitch and diameter has also reduced the cost of screw manufacturing. Nevertheless, screw threads are still expensive. The United Kingdom, Canada, and the United States have introduced a system for the calculation of screw pitch.
The pitch of a lead screw is the same as that of a lead screw. The diameter is 0.25 inches and the circumference is 0.79 inches. When calculating the mechanical advantage of a screw, divide the diameter by its pitch. The larger the pitch, the more threads the screw has, increasing its critical speed and stiffness. The pitch of a screw shaft is also proportional to the number of starts in the shaft.

Helix angle

The helix angle of a screw shaft is the angle formed between the circumference of the cylinder and its helix. Both of these angles must be equal to 90 degrees. The larger the lead angle, the smaller the helix angle. Some reference materials refer to angle B as the helix angle. However, the actual angle is derived from calculating the screw geometry. Read on for more information. Listed below are some of the differences between helix angles and lead angles.
High helix screws have a long lead. This length reduces the number of effective turns of the screw. Because of this, fine pitch screws are usually used for small movements. A typical example is a 16-mm x 5-inch screw. Another example of a fine pitch screw is a 12x2mm screw. It is used for small moves. This type of screw has a lower lead angle than a high-helix screw.
A screw’s helix angle refers to the relative angle of the flight of the helix to the plane of the screw axis. While screw helix angles are not often altered from the standard square pitch, they can have an effect on processing. Changing the helix angle is more common in two-stage screws, special mixing screws, and metering screws. When a screw is designed for this function, it should be able to handle the materials it is made of.
screwshaft

Size

The diameter of a screw is its diameter, measured from the head to the shaft. Screw diameters are standardized by the American Society of Mechanical Engineers. The diameters of screws range from 3/50 inches to 16 inches, and more recently, fractions of an inch have been added. However, shaft diameters may vary depending on the job, so it is important to know the right size for the job. The size chart below shows the common sizes for screws.
Screws are generally referred to by their gauge, which is the major diameter. Screws with a major diameter less than a quarter of an inch are usually labeled as #0 to #14 and larger screws are labeled as sizes in fractions of an inch. There are also decimal equivalents of each screw size. These measurements will help you choose the correct size for your project. The screws with the smaller diameters were not tested.
In the previous section, we described the different shaft sizes and their specifications. These screw sizes are usually indicated by fractions of an inch, followed by a number of threads per inch. For example, a ten-inch screw has a shaft size of 2” with a thread pitch of 1/4″, and it has a diameter of 2 inches. This screw is welded to a two-inch Sch. 40 pipe. Alternatively, it can be welded to a 9-inch O.A.L. pipe.
screwshaft

Shape

Screws come in a wide variety of sizes and shapes, from the size of a quarter to the diameter of a U.S. quarter. Screws’ main function is to hold objects together and to translate torque into linear force. The shape of a screw shaft, if it is round, is the primary characteristic used to define its use. The following chart shows how the screw shaft differs from a quarter:
The shape of a screw shaft is determined by 2 features: its major diameter, or distance from the outer edge of the thread on 1 side to the inner smooth surface of the shaft. These are generally 2 to 16 millimeters in diameter. Screw shafts can have either a fully threaded shank or a half-threaded shank, with the latter providing better stability. Regardless of whether the screw shaft is round or domed, it is important to understand the different characteristics of a screw before attempting to install it into a project.
The screw shaft’s diameter is also important to its application. The ball circle diameter refers to the distance between the center of 2 opposite balls in contact with the grooves. The root diameter, on the other hand, refers to the distance between the bottommost grooves of the screw shaft. These are the 2 main measurements that define the screw’s overall size. Pitch and nominal diameter are important measurements for a screw’s performance in a particular application.

Lubrication

In most cases, lubrication of a screw shaft is accomplished with grease. Grease is made up of mineral or synthetic oil, thickening agent, and additives. The thickening agent can be a variety of different substances, including lithium, bentonite, aluminum, and barium complexes. A common classification for lubricating grease is NLGI Grade. While this may not be necessary when specifying the type of grease to use for a particular application, it is a useful qualitative measure.
When selecting a lubricant for a screw shaft, the operating temperature and the speed of the shaft determine the type of oil to use. Too much oil can result in heat buildup, while too little can lead to excessive wear and friction. The proper lubrication of a screw shaft directly affects the temperature rise of a ball screw, and the life of the assembly. To ensure the proper lubrication, follow the guidelines below.
Ideally, a low lubrication level is appropriate for medium-sized feed stuff factories. High lubrication level is appropriate for larger feed stuff factories. However, in low-speed applications, the lubrication level should be sufficiently high to ensure that the screws run freely. This is the only way to reduce friction and ensure the longest life possible. Lubrication of screw shafts is an important consideration for any screw.

China best Automatic Piston Drive Servo Type Plastic and Glass Bottle Honey / Jam / Yogurt Peanut Chocolate Butter Bottling Filling and Sealing Machine near me supplier

China Standard New Condition Non Sew Non Woven 3 Ply Disposable Automatic Face Mask Machine with Good quality

Product Description

Product Description
Product Name	1+1 Mini Mask Machine
Certification	CE SGS ISO
Qualification Rate	98-99%
Equipment Efficiency	100-120pcs/min
Mask Specification	17595mm/14595mm
Equipment size	L:6100W2850H2100mm
Voltage	Single phase 220V 60HZ/50HZ
MOQ	1PCS
Machinery Test Report	Provied
Logo	Accept customization
ODM/OEM	Accept
Sample	A box of products produced by the mask machine
Lead time	5-7 days
Supply Ability	300 Sets Per/Month

Our Advantages

Why you should choose us?

1. We,Gosunm,has acquired the ISO9001 confirmation and SGS confirmation by gaozhen8888 . And our machines are all qualified with CE certificates and EU certificates.

2.We are cooperating with some reputed medical corporations such as Watsons, BYD, SanQi, Winner, and so on. And our machines are also welcomed in over 30 overseas countries. With these machines’ producing masks in our clients’ factories, our clients say highly of ou machines by comparing to the machines from other suppliers.

3.Our essential strong points:
a.Machine with high quality, company with timely inovation, components with genuine article, operation with longevity, performace with excellence, and production with superity.
b.Aftersales services is also available 24 hours because there is a engineer team and enough spare parts always standby.

Click For More Information

Service Guarantee

1. Free product warranty for one year.
2. A pack of wearing parts is provided for free.
3. Provide English installation instructions and circuit diagrams.
4. Provide complete installation video guidance and parts assembly video, multi-language explanation.
5. In some countries, there are cooperative agents that provide spare parts warehouses and provide long-term service sales.
6. A remote guidance sales service team to provide 24-hour online guidance services for engineers.

Customer Feedback

Certificate

Company Profile

GOSUNM MACHINERY

ZheJiang Gosunm Intelligent Industry Co., Ltd is located in HangZhou, the most economically dynamic international manufacturing city in South China. It was estab-lished in 2012 with a registered capital of 10 million. It has a modern factory building of more than 15,000 square meters and more than 200 main employees.

Exhibition & Business Partner

Packaging & Shipping

FAQ

1.Q: Are you a factory or trading company?
A: We are a factory which license of import & export.

2.Q: Where is your factory located? How can I visit there?
A: Our factory is located in HangZhou City,ZheJiang province China.
The nearest airport is HangZhou airport(30mins driving).
We would like to pick up you in that airport. Welcome to visit us!

3.Q: How long is the warranty period ?
A: Perfect after-sales service, one year machine warranty, free replacement of accessories.

4.Q: How about the installation? Do you have after-sale service?
A: We will send professional technician to your company to install the machine and train your staff until they could operate the machine independently.

5.Q:How long we will get the machine?
A: Delivery time up machine machine model, standard machine normally can shipping out within 10days, special machine up to our PI confirmed delivery date. And after shipping you just need wait the ship container arrived to you.

6.Q: Why should we choose your company?
>Certified company with CE certificates.
>Machinery and equipment professional manufacturer for 13 years, with more than 130 advanced patents.
>Chinese, English, and Korean languages manual, and we provide a complete machine assemble video. After-sales engineers are available at 24 hours on line.
>The machines are sold overseas and we have agencies in many countries, which can provide on-site installation, commissioning and maintenance services.

How to Replace the Drive Shaft

Several different functions in a vehicle are critical to its functioning, but the driveshaft is probably the part that needs to be understood the most. A damaged or damaged driveshaft can damage many other auto parts. This article will explain how this component works and some of the signs that it may need repair. This article is for the average person who wants to fix their car on their own but may not be familiar with mechanical repairs or even driveshaft mechanics. You can click the link below for more information.
air-compressor

Repair damaged driveshafts

If you own a car, you should know that the driveshaft is an integral part of the vehicle’s driveline. They ensure efficient transmission of power from the engine to the wheels and drive. However, if your driveshaft is damaged or cracked, your vehicle will not function properly. To keep your car safe and running at peak efficiency, you should have it repaired as soon as possible. Here are some simple steps to replace the drive shaft.
First, diagnose the cause of the drive shaft damage. If your car is making unusual noises, the driveshaft may be damaged. This is because worn bushings and bearings support the drive shaft. Therefore, the rotation of the drive shaft is affected. The noise will be squeaks, dings or rattles. Once the problem has been diagnosed, it is time to repair the damaged drive shaft.
Professionals can repair your driveshaft at relatively low cost. Costs vary depending on the type of drive shaft and its condition. Axle repairs can range from $300 to $1,000. Labor is usually only around $200. A simple repair can cost between $150 and $1700. You’ll save hundreds of dollars if you’re able to fix the problem yourself. You may need to spend a few more hours educating yourself about the problem before handing it over to a professional for proper diagnosis and repair.
The cost of repairing a damaged driveshaft varies by model and manufacturer. It can cost as much as $2,000 depending on parts and labor. While labor costs can vary, parts and labor are typically around $70. On average, a damaged driveshaft repair costs between $400 and $600. However, these parts can be more expensive than that. If you don’t want to spend money on unnecessarily expensive repairs, you may need to pay a little more.
air-compressor

Learn how drive shafts work

While a car engine may be 1 of the most complex components in your vehicle, the driveshaft has an equally important job. The driveshaft transmits the power of the engine to the wheels, turning the wheels and making the vehicle move. Driveshaft torque refers to the force associated with rotational motion. Drive shafts must be able to withstand extreme conditions or they may break. Driveshafts are not designed to bend, so understanding how they work is critical to the proper functioning of the vehicle.
The drive shaft includes many components. The CV connector is 1 of them. This is the last stop before the wheels spin. CV joints are also known as “doughnut” joints. The CV joint helps balance the load on the driveshaft, the final stop between the engine and the final drive assembly. Finally, the axle is a single rotating shaft that transmits power from the final drive assembly to the wheels.
Different types of drive shafts have different numbers of joints. They transmit torque from the engine to the wheels and must accommodate differences in length and angle. The drive shaft of a front-wheel drive vehicle usually includes a connecting shaft, an inner constant velocity joint and an outer fixed joint. They also have anti-lock system rings and torsional dampers to help them run smoothly. This guide will help you understand the basics of driveshafts and keep your car in good shape.
The CV joint is the heart of the driveshaft, it enables the wheels of the car to move at a constant speed. The connector also helps transmit power efficiently. You can learn more about CV joint driveshafts by looking at the top 3 driveshaft questions
The U-joint on the intermediate shaft may be worn or damaged. Small deviations in these joints can cause slight vibrations and wobble. Over time, these vibrations can wear out drivetrain components, including U-joints and differential seals. Additional wear on the center support bearing is also expected. If your driveshaft is leaking oil, the next step is to check your transmission.
The drive shaft is an important part of the car. They transmit power from the engine to the transmission. They also connect the axles and CV joints. When these components are in good condition, they transmit power to the wheels. If you find them loose or stuck, it can cause the vehicle to bounce. To ensure proper torque transfer, your car needs to stay on the road. While rough roads are normal, bumps and bumps are common.
air-compressor

Common signs of damaged driveshafts

If your vehicle vibrates heavily underneath, you may be dealing with a faulty propshaft. This issue limits your overall control of the vehicle and cannot be ignored. If you hear this noise frequently, the problem may be the cause and should be diagnosed as soon as possible. Here are some common symptoms of a damaged driveshaft. If you experience this noise while driving, you should have your vehicle inspected by a mechanic.
A clanging sound can also be 1 of the signs of a damaged driveshaft. A ding may be a sign of a faulty U-joint or center bearing. This can also be a symptom of worn center bearings. To keep your vehicle safe and functioning properly, it is best to have your driveshaft inspected by a certified mechanic. This can prevent serious damage to your car.
A worn drive shaft can cause difficulty turning, which can be a major safety issue. Fortunately, there are many ways to tell if your driveshaft needs service. The first thing you can do is check the u-joint itself. If it moves too much or too little in any direction, it probably means your driveshaft is faulty. Also, rust on the bearing cap seals may indicate a faulty drive shaft.
The next time your car rattles, it might be time for a mechanic to check it out. Whether your vehicle has a manual or automatic transmission, the driveshaft plays an important role in your vehicle’s performance. When 1 or both driveshafts fail, it can make the vehicle unsafe or impossible to drive. Therefore, you should have your car inspected by a mechanic as soon as possible to prevent further problems.
Your vehicle should also be regularly lubricated with grease and chain to prevent corrosion. This will prevent grease from escaping and causing dirt and grease to build up. Another common sign is a dirty driveshaft. Make sure your phone is free of debris and in good condition. Finally, make sure the driveshaft chain and cover are in place. In most cases, if you notice any of these common symptoms, your vehicle’s driveshaft should be replaced.
Other signs of a damaged driveshaft include uneven wheel rotation, difficulty turning the car, and increased drag when trying to turn. A worn U-joint also inhibits the ability of the steering wheel to turn, making it more difficult to turn. Another sign of a faulty driveshaft is the shuddering noise the car makes when accelerating. Vehicles with damaged driveshafts should be inspected as soon as possible to avoid costly repairs.

China Standard New Condition Non Sew Non Woven 3 Ply Disposable Automatic Face Mask Machine with Good quality

China wholesaler Fully Automatic Multi-Function Laminated Film LDPE HDPE Polythene PA CZPT K Seal / Skirt Seal Pouch Bag Making Machine with Servo-Drive System for Dog Cat Food near me factory

Product Description

SPECIFICATION

Center Lap Seal Pouch / Bag Making Machine Serious

Equipment	Center Lap Seal 350	Center Lap Seal 450	Center Lap Seal 600
Model	HD-350BTZ	HD-450BTZ	HD-600BTZ
Max. Unwinding Width(mm)	850	1050	1200
Max. Pouch Width(mm)	350	450	600
Min. Pouch Height(mm)	50
Max. Gusset Depth(mm)	60
Max. Feeding Speed(m/min)	45
Pouch Making Speed(pcs/min)	120-200 Depends on specific condition of machine operating and material

Center Lap & Fin Pouch / Bag Making Machine Serious

Equipment	Center Lap & Fin Seal 350	Center Lap & Fin Seal 450	Center Lap & Fin Seal 600
Model	HD-350BTQZ	HD-450BTQZ	HD-600BTQZ
Max. Unwinding Width(mm)	850	1050	1200
Max. Pouch Width(mm)	350	450	600
Min. Pouch Height(mm)	50
Max. Gusset Depth(mm)	60
Max. Feeding Speed(m/min)	45
Pouch Making Speed(pcs/min)	120-200 Depends on specific condition of machine operating and material

Center Seal Stand-Up Pouch / Bag Machine Serious

Equipment	Center Lap & Fin Seal 450	Center Seal & Stand-up 600
Model	HD-450BTZMML	HD-600BTZMML
Max. Unwinding Width(mm)	1050	1200
Max. Pouch Width(mm)	450	600
Min. Pouch Height(mm)	30
Max. Gusset Depth(mm)	60
Max. Feeding Speed(m/min)	45
Pouch Making Speed(pcs/min)	100-180 Depends on specific condition of machine operating and material

3-Side Seal Pouch / Bag Making Machine Serious

Equipment	3-Side Seal 600
Model	HD-600BU
Max. Unwinding Width(mm)	1200
Max. Pouch Width(mm)	600
Min. Pouch Height(mm)	30
Max. Feeding Speed(m/min)	45
Pouch Making Speed(pcs/min)	200 Depends on specific condition of machine operating and material

3-Side Seal & Stand-Up Pouch / Bag Making Machine Serious

Equipment	3-Side Seal & Stand-Up 600
Model	HD-600BUML
Max. Unwinding Width(mm)	1200
Max. Pouch Width(mm)	600
Min. Pouch Height(mm)	50
Max. Feeding Speed(m/min)	45
Pouch Making Speed(pcs/min)	100-180 Depends on specific condition of machine operating and material

3-Side Seal & Stand-Up Plus Pouch / Bag Making Machine Serious

Equipment	3-Side Seal & Stand-Up Plus 600
Model	HD-600BULL
Max. Unwinding Width(mm)	1200
Max. Pouch Width(mm)	600
Min. Pouch Height(mm)	50
Max. Feeding Speed(m/min)	45
Pouch Making Speed(pcs/min)	100-180 Depends on specific condition of machine operating and material

3-Side Seal & Stand-Up Ultra Pouch / Bag Making Machine Serious

Equipment	3-Side Seal & Stand-Up Ultra 850	3-Side Seal & Stand-Up Ultra 1100	3-Side Seal & Stand-Up Ultra 1250
Model	HD-850BU	HD-1100BU	HD-1250BU
Max. Unwinding Width(mm)	1500 Single Unwiding	1100 Double Unwiding	1250 Double Unwiding
Max. Pouch Width(mm)	850	1100	1250
Min. Pouch Height(mm)	50
Max. Feeding Speed(m/min)	45
Pouch Making Speed(pcs/min)	120-180 Depends on specific condition of machine operating and material

Flat Bottom Pouch / Bag Making Machine Serious

Equipment	Flat Bottom 600
Model	HD-600BF
Max. Unwinding Width(mm)	1200
Max. Feeding Speed(m/min)	45
Pouch Making Speed(pcs/min)	90-110 Depends on specific condition of machine operating and material

As a technology-based company with independent R&D and manufacturing capabilities, Tie Min’s founding team already has extensive experience in the flexible packaging industry more earlier before its establishement in 2001, which makes Tie Min can design and produce the bag / pouch machine from the perspective of customers – we came from the customers, and we are going back to the customers, we know flexible packaging industry better, so can make pouch / bag making machine right.After more than 20 years of continuous development in the industry, Tie Min has accumulated a wealth of experience in designing, technical and economic evaluation, manufacturing, installation, commissioning, staff training, and after-sales service, and have been striving to create lasting relationships with customers all over the world, guarantee that they can count on us for CZPT pricing and quality with zero hassle, which is based on a complete set of production and testing equipment, a perfect managment of supply chain, as well as a group of highly qualified professional technicians of designing, construction, and manufacturing.
Tie Min Machine is dedicated to helping customers get the most right solutions of flexible packaging.
Let us know what we can do for your business by leaving us a message. We’re here to make sure you don’t have to worry about anything.
Features: · PLC Controlled Pneumatic Locking Unwinding System integrated with extra EPC to achieve more precise control and more stable feeding – Pouch Making Speed and Yield Rate Guaranteed · Multiple Photoelectric Sensors and Mechanical Limits are applied to the material with and without printing to achieve production with different materials in just 1 machine – Early Investment Minimized · CRT Touch Screen with Remote Diagnostic and Restoration Function, plus a full set of manual CZPT and mature after-sales service -Convenience of machine operation guaranteed · Multiple auto-running functions available, such as Auto counting, Hole Punching/ Length Measuring / Sealing Speed Setting, making it possible for multiple machines controlled by just 1 man – Labour Cost Minimized · Mature Warning and Auto Stop System avoid loss caused by Temperature Lossing, Abnormal Unwinding and Feeding, Photoelectric Sensor and Servo Motor Going Down, etc. to Minimize Material Waste – Production costs Minimized FAQ Q:Are you factory or trading company? A:We are an original FACTORY specializing in designing, manufacturing, and customizing pouch bag making machines for over 20 years, we sincerely and warmly welcome all kinds of clients including the end customers, dealers, and sole agencies discuss with us about all forms of cooperation. Q:Where is your factory located? A:We are located in HangZhou City, 2 hours from ZheJiang by train or car, and 3 hours from HangZhou by air. Q: What kind of pouch bags can your machine make? A:The regular machine types we are selling can produce varieties of laminated pouches/bags, including but not limited to the following bag types: 2-Side seal pouch bag, 3-Side seal pouch bag, 4-Side seal pouch bag; Lap seal pouch bag, Fin seal pouch bag; Side gusset pouch bag, Bottom gusset pouch bag; Center seal pouch bag, Side seal pouch bag, Bottom seal pouch bag; Flat bottom pouch bag / Plough bottom pouch bag; K Seal pouch bag / Skirt seal pouch bag; Round bottom pouch bag / Doyen bag / Doypack; Corner bottom pouch bag / Plow bottom pouch bag/ Folded bottom pouch bag. We will be very glad to discuss with our clients if they have any special demand for packing solutions, providing them with varieties of customization. Q: What kinds of pouch bag material are available for your machine? A: Our machines can produce laminated pouch bags made with varieties of material, including Aluminum and Plastic like PET, BOPET, OPP, BOPP, LDPE, HDPE, PA, and so on, any special demands of material will be welcome to be discussed with us, we will be glad to help our customers to get the right packing solutions. Q:What’s your after-sale service policy? A:6 months warranty for electronic components + 12 months warranty for mechanical parts. On-site installation and adjustment or remote guidance via the internet Employee technical training Repair and Technical Support Q: What certification do you have? A: With the cooperation of a responsible production management team and an experienced technical team, we have obtained ISO9001 certification from UKAS and CE certification from SGS, and have independently developed more than 30 patents in the past 20 years.

What is a driveshaft and how much does it cost to replace one?

Your vehicle is made up of many moving parts. Knowing each part is important because a damaged driveshaft can seriously damage other parts of the car. You may not know how important your driveshaft is, but it’s important to know if you want to fix your car. In this article, we’ll discuss what a driveshaft is, what its symptoms are, and how much it costs to replace a driveshaft.
air-compressor

Repair damaged driveshafts

A damaged driveshaft does not allow you to turn the wheels freely. It also exposes your vehicle to higher repair costs due to damaged driveshafts. If the drive shaft breaks while the car is in motion, it may cause a crash. Also, it can significantly affect the performance of the car. If you don’t fix the problem right away, you could risk more expensive repairs. If you suspect that the drive shaft is damaged, do the following.
First, make sure the drive shaft is protected from dust, moisture, and dust. A proper driveshaft cover will prevent grease from accumulating in the driveshaft, reducing the chance of further damage. The grease will also cushion the metal-to-metal contact in the constant velocity joints. For example, hitting a soft material is better than hitting a metal wall. A damaged prop shaft can not only cause difficult cornering, but it can also cause the vehicle to vibrate, which can further damage the rest of the drivetrain.
If the driveshaft is damaged, you can choose to fix it yourself or take it to a mechanic. Typically, driveshaft repairs cost around $200 to $300. Parts and labor may vary based on your vehicle type and type of repair. These parts can cost up to $600. However, if you don’t have a mechanical background, it’s better to leave it to a professional.
If you notice that 1 of the 2 drive shafts is worn, it’s time to repair it. Worn bushings and bearings can cause the drive shaft to vibrate unnecessarily, causing it to break and cause further damage. You can also check the center bearing if there is any play in the bearing. If these symptoms occur, it is best to take your car to a mechanic as soon as possible.
air-compressor

Learn about U-joints

While most vehicles have at least 1 type of U-joint, there are other types available. CV joints (also known as hot rod joints) are used in a variety of applications. The minor axis is shorter than the major axis on which the U-joint is located. In both cases, the U-joints are lubricated at the factory. During servicing, the drive shaft slip joint should be lubricated.
There are 2 main styles of U-joints, including forged and press fit. They are usually held in place by C-clamps. Some of these U-joints have knurls or grooves. When selecting the correct fitting, be sure to measure the entire fitting. To make sure you get the correct size, you can use the size chart or check the manual for your specific model.
In addition to lubrication, the condition of the U-joint should be checked regularly. Lubricate them regularly to avoid premature failure. If you hear a clicking sound when shifting gears, the u-joint space may be misaligned. In this case, the bearing may need to be serviced. If there is insufficient grease in the bearings, the universal joint may need to be replaced.
U-joint is an important part of the automobile transmission shaft. Without them, your car would have no wheeled suspension. Without them, your vehicle will have a rickety front end and a wobbly rear end. Because cars can’t drive on ultra-flat surfaces, they need flexible driveshafts. The U-joint compensates for this by allowing it to move up and down with the suspension.
A proper inspection will determine if your u-joints are loose or worn. It should be easy to pull them out. Make sure not to pull them all the way out. Also, the bearing caps should not move. Any signs of roughness or wear would indicate a need for a new UJ. Also, it is important to note that worn UJs cannot be repaired.

Symptoms of Driveshaft Failure

One of the most common problems associated with a faulty driveshaft is difficulty turning the wheels. This severely limits your overall control over the vehicle. Fortunately, there are several symptoms that could indicate that your driveshaft is failing. You should take immediate steps to determine the cause of the problem. One of the most common causes of driveshaft failure is a weak or faulty reverse gear. Other common causes of driveshaft damage include driving too hard, getting stuck in reverse gear and differential lock.
Another sign of a failed driveshaft is unusual noise while driving. These noises are usually the result of wear on the bushings and bearings that support the drive shaft. They can also cause your car to screech or scratch when switching from drive to idle. Depending on the speed, the noise may be accompanied by vibration. When this happens, it’s time to send your vehicle in for a driveshaft replacement.
One of the most common symptoms of driveshaft failure is noticeable jitter when accelerating. This could be a sign of a loose U-joint or worn center bearing. You should thoroughly inspect your car to determine the cause of these sounds and corresponding symptoms. A certified mechanic can help you determine the cause of the noise. A damaged propshaft can severely limit the drivability of the vehicle.
Regular inspection of the drive shaft can prevent serious damage. Depending on the damage, you can replace the driveshaft for anywhere from $500 to $1,000. Depending on the severity of the damage and the level of repair, the cost will depend on the number of parts that need to be replaced. Do not drive with a bad driveshaft as it can cause a serious crash. There are several ways to avoid this problem entirely.
The first symptom to look for is a worn U-joint. If the U-joint comes loose or moves too much when trying to turn the steering wheel, the driveshaft is faulty. If you see visible rust on the bearing cap seals, you can take your car to a mechanic for a thorough inspection. A worn u-joint can also indicate a problem with the transmission.
air-compressor

The cost of replacing the drive shaft

Depending on your state and service center, a driveshaft repair can cost as little as $300 or as high as $2,000, depending on the specifics of your car. Labor costs are usually around $70. Prices for the parts themselves range from $400 to $600. Labor costs also vary by model and vehicle make. Ultimately, the decision to repair or replace the driveshaft will depend on whether you need a quick car repair or a full car repair.
Some cars have 2 separate driveshafts. One goes to the front and the other goes to the back. If your car has 4 wheel drive, you will have two. If you’re replacing the axles of an all-wheel-drive car, you’ll need a special part for each axle. Choosing the wrong 1 can result in more expensive repairs. Before you start shopping, you should know exactly how much it will cost.
Depending on the type of vehicle you own, a driveshaft replacement will cost between PS250 and PS500. Luxury cars can cost as much as PS400. However, for safety and the overall performance of the car, replacing the driveshaft may be a necessary repair. The cost of replacing a driveshaft depends on how long your car has been on the road and how much wear and tear it has experienced. There are some symptoms that indicate a faulty drive shaft and you should take immediate action.
Repairs can be expensive, so it’s best to hire a mechanic with experience in the field. You’ll be spending hundreds of dollars a month, but you’ll have peace of mind knowing the job will be done right. Remember that you may want to ask a friend or family member to help you. Depending on the make and model of your car, replacing the driveshaft is more expensive than replacing the parts and doing it yourself.
If you suspect that your drive shaft is damaged, be sure to fix it as soon as possible. It is not advisable to drive a car with abnormal vibration and sound for a long time. Fortunately, there are some quick ways to fix the problem and avoid costly repairs later. If you’ve noticed the symptoms above, it’s worth getting the job done. There are many signs that your driveshaft may need service, including lack of power or difficulty moving the vehicle.

China wholesaler Fully Automatic Multi-Function Laminated Film LDPE HDPE Polythene PA CZPT K Seal / Skirt Seal Pouch Bag Making Machine with Servo-Drive System for Dog Cat Food near me factory

China Professional 500W/1000W CNC Automatic CNC Engraving Fiber Laser Cutter /Laser Cutting Machine for Metal/Steel Sheet/Carbon/Brass/Aluminum with Good quality

Product Description

KH-3015 Fiber Laser Cutting Machine

Features:

1.The medium-power laser cutting machine with the highest precision in China, it can cut small metal bike design with size of half a coin.

2.Equipped with original japan imported servo motor and ZheJiang precise ball screw CZPT rail, highest speed up to 40m/min and accelerated speed up to 1 G, 120 holes can be cut within 1 minute.

3.Integrated machine accessories, fast disassembly, left and right drawers collecting saves space.

4.Professionally cutting 0.5-14mm carbon steel, 0.5-10mm stainless steel, galvanized steel, eletrogalvanized metal sheet, silicium steel and some other kinds of thin metal sheets. (The laser brand can be customized, power optional from 500w-3000w )

SPECIFICATION OF KH-3015 FIBER LASER CUTTING MACHINE
Working area	1500 mm * 3000mm
Laser Power	500W/ 1000W/ 2000W/ 3000W
Laser Type	Fiber laser, water-cooling
Laser wavelength	1080nm
Running speed	0-60m/min
CNC or Not	CNC
Resetting Position Accuracy	≤±0.01mm
Control Software	Cypcut, Weihong
Operating Temperature	0 – 40 ° C
Graphic format supported	BMP, HPGL(PLT), JPEG, DXF,AI, DST
Transfer method	Double drive rack and pinion
Drive modor	Imported servo motor and servo drive
Applied material	Carbon steel/SS and other metal plates
Warranty	2 Years
Packing Dimension	3900mm * 2500mm * 2000mm (LWH)
Net Weight	Approximately 3000 KG

Applicable materials for laser cutting machine for metal

Fiber Laser Cutting Equipment is suitable for metal cutting with Stainless Steel Sheet, Mild Steel Plate, Carbon Steel Sheet, Alloy Steel Plate, Spring Steel Sheet, Iron Plate, Galvanized Iron, Galvanized Sheet, Aluminum Plate, Copper Sheet, Brass Sheet, Bronze Plate, Gold Plate, Silver Plate, Titanium Plate, Metal Sheet, Metal Plate, Tubes and Pipes, etc.

Application Industries

Fiber Laser Cutting Machine is widely used in manufacturing Billboard, Advertising, Signs, Signage, Metal Letters, LED Letters, Kitchen Ware, Advertising Letters, Sheet Metal Processing, Metals Components and Parts, Ironware, Chassis, Racks & Cabinets Processing, Metal Crafts, Metal Art Ware, Elevator Panel Cutting, Hardware, Auto Parts, Glasses Frame, Electronic Parts, Nameplates, etc.

Configuration:

Configuration for fiber metal laser cutting machine

3000*1500mm working area;

Raytools laser cutting head;

X,Y axis Japan YASKAWA/ CZPT servo motor;

Z axis Japan CZPT servo motor;

ZheJiang HIWIN guide rail;

ZheJiang YYC gear rack;

Japan SHIMPO reducer;

ZheJiang TBI ball screw;

Japan /ZheJiang pneumatic components;

France Schneider electrical components;

Cypcut control system.

Application:

Packaging & Shipping

1. Kahan CNC machine and accessories are covered by plastic sheet first.
2. Then the whole machine is packed by plywood case used for export.
3. Kahan CNC machine can be delivered by sea, by train, or by plane depending on customers.

Delivery Detail:

Shipped in 15-30 working days after payment.

Guarantee:

2 years warranty for the whole machine. Within 24 months under normal use and maintenance, if something is wrong with the machine, you will get spare part for free. After 24 months, you will get spare parts at cost price. You will also get technical support and service all the lifetime.

Technical support:

1. Technical support by phone, email or WhatsApp/Skype around the clock.
2. Friendly English version manual and operation video CD disk.
3. If needed, we can send our engineer to your site for training or you can send the operator to our factory for training.

After sales services:

Normal machine is properly adjusted before dispatch. You will be CZPT to use the machine immediately after received machine. Besides, you will be CZPT to get free training advice towards our machine in our factory. You will also get free suggestion and consultation, technical support and service by email/WhatsApp/tel etc.

FAQ

Q: There are so many machine types, which 1 should I choose?
A: Kahan Laser provides machine parameters in each product demo page, please kindly check technical data column. It is important to compare all data before choose the best prototype. Also, our sales team provides online services to resolve your confusion, feel free to contact us.

Q:This is my first time buying your machine; I have no ideas about Kahan’s machines quality?
A: Each machine is strictly produced based on the standard of ISO9000-2000, ISO14001-2004, GMC global manufacturer and CE certifications. Our products have CE certifications verified by TÜV SÜD, Bureau Veritas and etc. As china high-power laser cutting machine provider, more than 10,000 machines have been sold in the past 10 years. Customer is our first priority. We are confident to tell customers that there is no need to worry about our quality.

Q: When I got this machine, but I don’t know how to use it. What should I do?
A:There are videos and English manual with the machine. If you still have some doubts, we can talk by telephone or email.

Q: If some problems happen to this machine during warranty period, what should I do?
A: We will supply free parts during machine warranty period if machine have some problems. While we also supply free life long after-sales service. If you have any question,just contact us freely.

What is a driveshaft and how much does it cost to replace one?

Repair damaged driveshafts

Learn about U-joints

Symptoms of Driveshaft Failure

The cost of replacing the drive shaft

China Professional 500W/1000W CNC Automatic CNC Engraving Fiber Laser Cutter /Laser Cutting Machine for Metal/Steel Sheet/Carbon/Brass/Aluminum with Good quality

China wholesaler Factory Direct Sale Automatic Eyelet Punching Machine for Paper Film PE Plastic Nonwoven CZPT Punching with Good quality

Product Description

Perforating hole shapes	Micro air holes, large air holes, round hot holes, oval hot holes, point gasification hole and so on (other hole shapes also can be customized)
Perforating hole size	0.03-20mm
Heating roller temperature	≤300ºC
Needle roller	It’s processed by high-precision equipment abroad
Needle roller advantages	1) With high needle density, needle center distance error is no more than 0.001 mm. 2) Tip surface concentricity≤0.005 mm.

Features:
1) Equipment function: film cold perforating, hot perforating, blanching hole and hot Puncture hole.
2) Perforating material: all kinds of packing plastic film, paper, compound film, copper foil, aluminum foil, non-woven fabric and Car sound insulation board etc., which is especially suitable for those materials such as non-woven fabric, OPP,PE,PET,desiccant, deoxidizer packing compound films.
3) The performance of micro tension synchronous rewinding can reach to the standard of that
in Germany and Japan.

Technological Process:
Decoiler → feeding guide → perforating forming → discharging guide → coiling.

Model	HK-1600
Unwinding rack	Steel plate structure
Unwinding form	Magnetic powder brake
Unwinding load-bearing	1200kg
Emboss machine form	Vertical 2 rollers perforating machine
Effective worktable size	1600mm
Single roller diameter	1200mm
Single layer thickness	0.3mm
Production capacity	0-100m/min
Perforating adjust method	Screw pressure
Transmission	Gear drive
Perforating form	Upper and lower concave-convex rollers opposing pressure.
Weight	3500kg
Cycloidal pin gear speed reducer	XWD7-11-7.5
Three-phase asynchronous motor	HangZhou Shun Bal Electric CO., LTD
Frequency conversion brand	Taida
Embossing machine rack	Steel plate structure
Embossed material	PET FOIL,MPET,Kraft paper
Arrangement	Cross arrangement
Hole shape	Circle hole+needle hole
Winding rack	Steel plate structure
Winding form	Motor winding
Winding power	5.5kw
Winding load-bearing	1200kg
Winding diameter	1200mm
Machine size	1600mm2000mm1300mm

About us:

ZHangZhoug Zhongnuo Intelligent Machinery Co., Ltd. was founded in 2014, It is a National High-Tech Enterprise that is specializing in scientific research, development and manufacturing of various types of metal sheet intelligent embossing machines and forming machines. Company’s main business: Industrial Robots, Intelligent Manipulators, Intelligent Embossing Production Lines, Medical Machinery, Industrial Automation Equipment, CNC Precision Leveling Machines, Intelligent Metal Forming Machines, Fully-automatic Embossing Machines, Fully-automatic Flattening lines and Precision Perforating Machines, etc. Product application areas: Transportation, Medical Treatment, Aviation, Motor Trains, Automobiles, Home Appliances, Sanitary Materials, Building Materials, etc. Our products have exported to Europe, America, Japan, South Korea, the Middle East, Southeast Asia, Africa and many other countries all over the world. We are based on the idea of ” Honesty, Quality, Service, and Innovation”, which brought us lots of customers. At present, our company has continuous friendly relations with many big enterprises, such as the 59th Research Institute of China Ordnance Industry, Aviation Industry, HangZhou Special Structure Research Institute, Virginia, Maosen Group, CZPT Group, Mingbo shares, Rihan Group etc.

Why choose us

ZHangZhoug Zhongnuo Intelligent Machinery Co., Ltd. has sophisticated equipment, advanced technology and strong technical force. Our company took the lead to pass IS09001 quality system certification, our company was rated as a small and medium-sized Science and Technology Enterprise in ZHangZhoug Province. In the year of 2571, our company was honored as a High-growth Technological Enterprise and National High-Tech Enterprise in ZHangZhoug Province. Meanwhile our company absorbed foreign advanced technology to product, so ZHangZhoug Zhongnuo Intelligent Machinery Co., Ltd. is the high quality roller machinery manufacturer in China. Now our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.

Packaging & Shipping

FAQ

Q: Are you factory or trade company?
A: We are factory and we have a professional engineer team which can design the machine as customers’ request

Q: Do you have after sales support?
A: Yes, we are happy to give advice and we also have skilled technicians available. If any question during operation,
you can contact us, and we’ll help you to solve the problems.

Q: How do your machines compare with other big companies in this market?
A: We are up to date with the latest technology and rich experience about machines and global market.
We boast of professional engineer team and after-sale service team.

Q: If we’ve bought a machine from you, are you CZPT to supply us with material?
A: We can offer you or help you to find suitable materials for your machines.

Q: Do you sell only standard machines?
A: No, most of our machines are made according to customers’ special requirements, and all our machines can be customized.

What is a drive shaft?

If you notice a clicking noise while driving, it is most likely the driveshaft. An experienced auto mechanic will be able to tell you if the noise is coming from both sides or from 1 side. If it only happens on 1 side, you should check it. If you notice noise on both sides, you should contact a mechanic. In either case, a replacement driveshaft should be easy to find.
air-compressor

The drive shaft is a mechanical part

A driveshaft is a mechanical device that transmits rotation and torque from the engine to the wheels of the vehicle. This component is essential to the operation of any driveline, as the mechanical power from the engine is transmitted to the PTO (power take-off) shaft, which hydraulically transmits that power to connected equipment. Different drive shafts contain different combinations of joints to compensate for changes in shaft length and angle. Some types of drive shafts include connecting shafts, internal constant velocity joints, and external fixed joints. They also contain anti-lock system rings and torsional dampers to prevent overloading the axle or causing the wheels to lock.
Although driveshafts are relatively light, they need to handle a lot of torque. Torque applied to the drive shaft produces torsional and shear stresses. Because they have to withstand torque, these shafts are designed to be lightweight and have little inertia or weight. Therefore, they usually have a joint, coupling or rod between the 2 parts. Components can also be bent to accommodate changes in the distance between them.
The drive shaft can be made from a variety of materials. The most common material for these components is steel, although alloy steels are often used for high-strength applications. Alloy steel, chromium or vanadium are other materials that can be used. The type of material used depends on the application and size of the component. In many cases, metal driveshafts are the most durable and cheapest option. Plastic shafts are used for light duty applications and have different torque levels than metal shafts.

It transfers power from the engine to the wheels

A car’s powertrain consists of an electric motor, transmission, and differential. Each section performs a specific job. In a rear-wheel drive vehicle, the power generated by the engine is transmitted to the rear tires. This arrangement improves braking and handling. The differential controls how much power each wheel receives. The torque of the engine is transferred to the wheels according to its speed.
The transmission transfers power from the engine to the wheels. It is also called “transgender”. Its job is to ensure power is delivered to the wheels. Electric cars cannot drive themselves and require a gearbox to drive forward. It also controls how much power reaches the wheels at any given moment. The transmission is the last part of the power transmission chain. Despite its many names, the transmission is the most complex component of a car’s powertrain.
The driveshaft is a long steel tube that transmits mechanical power from the transmission to the wheels. Cardan joints connect to the drive shaft and provide flexible pivot points. The differential assembly is mounted on the drive shaft, allowing the wheels to turn at different speeds. The differential allows the wheels to turn at different speeds and is very important when cornering. Axles are also important to the performance of the car.

It has a rubber boot that protects it from dust and moisture

To keep this boot in good condition, you should clean it with cold water and a rag. Never place it in the dryer or in direct sunlight. Heat can deteriorate the rubber and cause it to shrink or crack. To prolong the life of your rubber boots, apply rubber conditioner to them regularly. Indigenous peoples in the Amazon region collect latex sap from the bark of rubber trees. Then they put their feet on the fire to solidify the sap.
air-compressor

it has a U-shaped connector

The drive shaft has a U-joint that transfers rotational energy from the engine to the axle. Defective gimbal joints can cause vibrations when the vehicle is in motion. This vibration is often mistaken for a wheel balance problem. Wheel balance problems can cause the vehicle to vibrate while driving, while a U-joint failure can cause the vehicle to vibrate when decelerating and accelerating, and stop when the vehicle is stopped.
The drive shaft is connected to the transmission and differential using a U-joint. It allows for small changes in position between the 2 components. This prevents the differential and transmission from remaining perfectly aligned. The U-joint also allows the drive shaft to be connected unconstrained, allowing the vehicle to move. Its main purpose is to transmit electricity. Of all types of elastic couplings, U-joints are the oldest.
Your vehicle’s U-joints should be inspected at least twice a year, and the joints should be greased. When checking the U-joint, you should hear a dull sound when changing gears. A clicking sound indicates insufficient grease in the bearing. If you hear or feel vibrations when shifting gears, you may need to service the bearings to prolong their life.

it has a slide-in tube

The telescopic design is a modern alternative to traditional driveshaft designs. This innovative design is based on an unconventional design philosophy that combines advances in material science and manufacturing processes. Therefore, they are more efficient and lighter than conventional designs. Slide-in tubes are a simple and efficient design solution for any vehicle application. Here are some of its benefits. Read on to learn why this type of shaft is ideal for many applications.
The telescopic drive shaft is an important part of the traditional automobile transmission system. These driveshafts allow linear motion of the 2 components, transmitting torque and rotation throughout the vehicle’s driveline. They also absorb energy if the vehicle collides. Often referred to as foldable driveshafts, their popularity is directly dependent on the evolution of the automotive industry.
air-compressor

It uses a bearing press to replace worn or damaged U-joints

A bearing press is a device that uses a rotary press mechanism to install or remove worn or damaged U-joints from a drive shaft. With this tool, you can replace worn or damaged U-joints in your car with relative ease. The first step involves placing the drive shaft in the vise. Then, use the 11/16″ socket to press the other cup in far enough to install the clips. If the cups don’t fit, you can use a bearing press to remove them and repeat the process. After removing the U-joint, use a grease nipple Make sure the new grease nipple is installed correctly.
Worn or damaged U-joints are a major source of driveshaft failure. If 1 of them were damaged or damaged, the entire driveshaft could dislocate and the car would lose power. Unless you have a professional mechanic doing the repairs, you will have to replace the entire driveshaft. Fortunately, there are many ways to do this yourself.
If any of these warning signs appear on your vehicle, you should consider replacing the damaged or worn U-joint. Common symptoms of damaged U-joints include rattling or periodic squeaking when moving, rattling when shifting, wobbling when turning, or rusted oil seals. If you notice any of these symptoms, take your vehicle to a qualified mechanic for a full inspection. Neglecting to replace a worn or damaged u-joint on the driveshaft can result in expensive and dangerous repairs and can cause significant damage to your vehicle.

China wholesaler Factory Direct Sale Automatic Eyelet Punching Machine for Paper Film PE Plastic Nonwoven CZPT Punching with Good quality

China supplier Automatic Plastic Mineral Water Yogurt Cup Filling Capping Sealing Machine with Good quality

Product Description

KIS-9/8822 0571 -89612868

Click here please

With 15 years OEM experience,we can provide professional solutions for customer.

Send your inquiry Details in the Below,Click “send “Now!

How to Replace the Drive Shaft

Several different functions in a vehicle are critical to its functioning, but the driveshaft is probably the part that needs to be understood the most. A damaged or damaged driveshaft can damage many other auto parts. This article will explain how this component works and some of the signs that it may need repair. This article is for the average person who wants to fix their car on their own but may not be familiar with mechanical repairs or even driveshaft mechanics. You can click the link below for more information.

Repair damaged driveshafts

If you own a car, you should know that the driveshaft is an integral part of the vehicle’s driveline. They ensure efficient transmission of power from the engine to the wheels and drive. However, if your driveshaft is damaged or cracked, your vehicle will not function properly. To keep your car safe and running at peak efficiency, you should have it repaired as soon as possible. Here are some simple steps to replace the drive shaft.
First, diagnose the cause of the drive shaft damage. If your car is making unusual noises, the driveshaft may be damaged. This is because worn bushings and bearings support the drive shaft. Therefore, the rotation of the drive shaft is affected. The noise will be squeaks, dings or rattles. Once the problem has been diagnosed, it is time to repair the damaged drive shaft.
Professionals can repair your driveshaft at relatively low cost. Costs vary depending on the type of drive shaft and its condition. Axle repairs can range from $300 to $1,000. Labor is usually only around $200. A simple repair can cost between $150 and $1700. You’ll save hundreds of dollars if you’re able to fix the problem yourself. You may need to spend a few more hours educating yourself about the problem before handing it over to a professional for proper diagnosis and repair.
The cost of repairing a damaged driveshaft varies by model and manufacturer. It can cost as much as $2,000 depending on parts and labor. While labor costs can vary, parts and labor are typically around $70. On average, a damaged driveshaft repair costs between $400 and $600. However, these parts can be more expensive than that. If you don’t want to spend money on unnecessarily expensive repairs, you may need to pay a little more.

Learn how drive shafts work

While a car engine may be 1 of the most complex components in your vehicle, the driveshaft has an equally important job. The driveshaft transmits the power of the engine to the wheels, turning the wheels and making the vehicle move. Driveshaft torque refers to the force associated with rotational motion. Drive shafts must be able to withstand extreme conditions or they may break. Driveshafts are not designed to bend, so understanding how they work is critical to the proper functioning of the vehicle.
The drive shaft includes many components. The CV connector is 1 of them. This is the last stop before the wheels spin. CV joints are also known as “doughnut” joints. The CV joint helps balance the load on the driveshaft, the final stop between the engine and the final drive assembly. Finally, the axle is a single rotating shaft that transmits power from the final drive assembly to the wheels.
Different types of drive shafts have different numbers of joints. They transmit torque from the engine to the wheels and must accommodate differences in length and angle. The drive shaft of a front-wheel drive vehicle usually includes a connecting shaft, an inner constant velocity joint and an outer fixed joint. They also have anti-lock system rings and torsional dampers to help them run smoothly. This guide will help you understand the basics of driveshafts and keep your car in good shape.
The CV joint is the heart of the driveshaft, it enables the wheels of the car to move at a constant speed. The connector also helps transmit power efficiently. You can learn more about CV joint driveshafts by looking at the top 3 driveshaft questions
The U-joint on the intermediate shaft may be worn or damaged. Small deviations in these joints can cause slight vibrations and wobble. Over time, these vibrations can wear out drivetrain components, including U-joints and differential seals. Additional wear on the center support bearing is also expected. If your driveshaft is leaking oil, the next step is to check your transmission.
The drive shaft is an important part of the car. They transmit power from the engine to the transmission. They also connect the axles and CV joints. When these components are in good condition, they transmit power to the wheels. If you find them loose or stuck, it can cause the vehicle to bounce. To ensure proper torque transfer, your car needs to stay on the road. While rough roads are normal, bumps and bumps are common.

Common signs of damaged driveshafts

If your vehicle vibrates heavily underneath, you may be dealing with a faulty propshaft. This issue limits your overall control of the vehicle and cannot be ignored. If you hear this noise frequently, the problem may be the cause and should be diagnosed as soon as possible. Here are some common symptoms of a damaged driveshaft. If you experience this noise while driving, you should have your vehicle inspected by a mechanic.
A clanging sound can also be 1 of the signs of a damaged driveshaft. A ding may be a sign of a faulty U-joint or center bearing. This can also be a symptom of worn center bearings. To keep your vehicle safe and functioning properly, it is best to have your driveshaft inspected by a certified mechanic. This can prevent serious damage to your car.
A worn drive shaft can cause difficulty turning, which can be a major safety issue. Fortunately, there are many ways to tell if your driveshaft needs service. The first thing you can do is check the u-joint itself. If it moves too much or too little in any direction, it probably means your driveshaft is faulty. Also, rust on the bearing cap seals may indicate a faulty drive shaft.
The next time your car rattles, it might be time for a mechanic to check it out. Whether your vehicle has a manual or automatic transmission, the driveshaft plays an important role in your vehicle’s performance. When 1 or both driveshafts fail, it can make the vehicle unsafe or impossible to drive. Therefore, you should have your car inspected by a mechanic as soon as possible to prevent further problems.
Your vehicle should also be regularly lubricated with grease and chain to prevent corrosion. This will prevent grease from escaping and causing dirt and grease to build up. Another common sign is a dirty driveshaft. Make sure your phone is free of debris and in good condition. Finally, make sure the driveshaft chain and cover are in place. In most cases, if you notice any of these common symptoms, your vehicle’s driveshaft should be replaced.
Other signs of a damaged driveshaft include uneven wheel rotation, difficulty turning the car, and increased drag when trying to turn. A worn U-joint also inhibits the ability of the steering wheel to turn, making it more difficult to turn. Another sign of a faulty driveshaft is the shuddering noise the car makes when accelerating. Vehicles with damaged driveshafts should be inspected as soon as possible to avoid costly repairs.

This entry was posted in Product Catalog and tagged automatic cup sealing machine, automatic filling machine, automatic machine, automatic sealing machine, china machine, cup sealing machine, filling machine, filling machine automatic, filling sealing machine, machine, machine automatic, machine water, machine yogurt, mineral water machine, plastic cup machine, plastic machine, plastic sealing machine, sealing machine automatic, water cup machine, water filling machine, water machine on June 28, 2022 by ep.

China manufacturer Full Automatic Veneer Peeling Machine in Woodworking Line with Great quality

Product Description

About Us :
ZheJiang Hummingbird Machinery Co., Ltd., formerly known as HangZhou Xinkun Machinery Co., Ltd., is located in the plywood base of HangZhou City, ZheJiang Province, specializing in the production and research and development of woodworking machinery for more than 10 years. We are a manufacturer of wood working machinery with well-equipped testing facilities and strong technical force. We are the leading manufacturer of woodworking machinery specialized in wood based panel production line for more than 10 years. The main products are plywood assembly line, peeling machine, log cutting machine, hot press, cold press, automatic loading machine, search saw and other plywood machinery and equipment. We offer you qualified products and service with a complete equipment solutions. We can offer you not only a complete equipment solutions to your plan but also good technology service. Engineers available to service machinery overseas and after-sales service provided in our company.

In 2018, following the development of prefabricated buildings, the company invested in the construction of steel structure factory, with an annual output of 15, 000 tons. There are 2 light steel production lines and 1 heavy steel production line. And with a number of ALC panels manufacturers, committed to the development of prefabricated housing.

In 2019, Hummingbird Import and Export Trading Co., Ltd. Was established. Based on the principle of integrity and quality, we bring the concept of good mechanical products and prefabricated houses to the world. We also welcome OEM and ODM orders. In line with the concept of service first, we sincerely look forward to cooperating with you, hoping to help you further in your career!

Why Choose Us:
Pre-sale service
(1) Provide the free consultation of equipment

(2) Provide the standard device and the flow chart

(3) According to the clients’ special requirement ,offering the resonable plan and free design to help to select the equipment .

(4)Welcome to visit our factory

Service during the sales
(1) Inspect the machine before leaving the factory

(2) Oversea install and debug the equipment

(3) Train the first-line operator

After sales service
(1) 24 hours online service

(2) Provide the VIDEO with install and debug the equipment

(3) Provide technical exchanging

FAQ

Q1:Can you customize products for clients?

A: Yes We can customize and produce woodworking machines according to the customer’s
requirements or drawings.

Q2:What about your products quality?

A:We can provide you samples for quality inspection. If you order, we guarantee the quality is
same with sample. In case of quality problem, we can sign agreements and our company will
perform the duties.

Q3:How can we trust your factory?

A:We recommend that you come to our factory to see the goods,to verify the real situation of
the products, and know more about our factory.

Q4:Why does the price often change?

A:The price depends on the latest prices of the raw materials

Q5:What about the contract signing?

A: If you’re satisfied with the products and our service, you can sign the contract with us, pay
the deposit Then we’ll produce the machines as soon as possible. If you are far away, we can
sign the contract by fax. We will ensure the quality of the products and the accessories are
complete.

Q6: How about delivery?

A: when the product is ready, it can be delivered to you after your full payment. We^}ll provide
technical guidance.

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

This entry was posted in Product Catalog and tagged automatic machine, china machine, machine, machine automatic, machine china manufacturer, machine manufacturer, machine peeling, peeling machine, veneer peeling machine, woodworking machine on June 28, 2022 by ep.

China OEM Automatic Can Sealing Machine Automatic Aluminum Paper Can Sealing Machine for Facial Tissue with Free Design Custom

Product Description

Automatic Can Sealing Machine Automatic Aluminum Paper Can Sealing Machine for Facial tissue

Product Description

Application:
KIS-1800 series are applicable to fill and seal cans, bottles, jars, canisters, bucket, and so on, used to fill with liquid, cream or solid material, such as milk, juice, chocolate, seasoning, disinfectant and so on. It can be customized for packing potato chips, cosmetic cream, wet wipes, bleach, etc..
Features:
1. It adopts stainless steel as frame, aluminum or plastic rotary board.
2. The food contact parts adopt 304 or 316 stainless steel material with food hygiene requirements.
3. It adopts pneumatic drive and PLC control. It can automatically drop cup, fill, pull roll film, cut roll film and wasted film recycling heat sealing.
Main Function:
1. automatic can feed in
2. automatic foil suck
3. automatic sealing
4. auto can feed out
Technology training:
We can arrange professional technician to install and adjust the machine if customers require, as well as train the operator to operate, adjust and maintain the machine.
Optional Configuration:
1. Conveyor
2. CIP tank
3. mix tank
4. double jacket tank
5. Photocell
6. date printing
7. Plexiglass cover
Technical data:

Model KIS-1800-4

Production capacity 3200-4000 cans/h, can be customized

Filling range 5~300ml (can be customized)

Filling accuracy <±1.5%

Power 3N 380V/ single phase 220V, 50/60Hz

Power 2Kw

Air consumption 1.5 m^з/min

Dimension 2000mmX1800mmX1750mm

Weight 550Kg

Detailed Photos

Company Profile

About Chunlai Packing Machinery

Chunlai is a reputed manufacturer for different kinds of automatic filling & sealing packaging machines. For more than 10 years, Chunlai supplys packaging machines that fully meet customer’s requirements.

No matter your product is solid, liquid, paste, powder or granule, Chunlai has machine meet your packaging requirement. Chunlai offer packaging machines for rice packing, seafood packing, beverage packing, dairy packing, soybean product packing, snack food packing, fast food packing, daily product packing, cosmetic product packing, etc..

Chunlai provides a comprehensive experienced technical service. This ensures you the high quality production, secure sealing finish, ease operation and minimum maintenance.

Each machine is carefully inspected and tested by our highly experienced staff before shipment.

Workshop show

Filling for liquid ,paste,granule,powder,and so on.
Sealing for cup,bottle,bowl,tray,can,jar,bucket etc…

yogurt /Milk/Chocolate
Filling Sealing Machine Water
Filling Sealing  Machine Juice
Filling Sealing  Machine

Jelly/Pudding
Filling  Sealing Machine Jam
Filling Sealing Machine Sauce
Filling Sealing  Machine

Instant Noodles
Sealing Machine Dumpling/Beancurd
Sealing Machine Coffee
Filling Sealing  Machine

Dinner box
Sealing Machine Frozen Food/MAP
Packaging Machine Potato Chips Canister
Sealing  Machine

Porridge
Filling Sealing Machine Plastic Jar
Sealing Machine Plastic Bucket
Sealing  Machine

Wetb Wipe Can
Sealing Machine Dehumidifier Box
Filling Sealing Machine
Cosmetic/Detergent
Filling Sealing  Machine

Main CategoriesObtained CertificateEnterprise core competenceMain MarketsPacking & shipping

Packaging Shipping

First Rust inhibitor; First contact you the machine is ok.

Second Wrap film; Second put the freight come and take the machine.

Third Plywood cases; Receiving.

Last in container. Accept!

Our services

1. Best Service: Product manager Roy for your service.Always FREE.
2. 12H Skypee( chunlaipack1 ) on line.
3. Welcome visit factory.
4. After sale service.
5. Mail be reply in 12 Hours.(except not working days )
6. Photos ing in trade line.

Reasons for choosing us

1.our machine can be customized ,we can according to your requirement to make machine (you can give any box/cup size you want ,we all can do it ).

2. we are a factory direct sale

3.Give you best service ,we all meet your demand .

FAQ

Q: First time import, how can I believe that you would send product ?
A: We are verified company by Alibaba ,to make transaction success, we support and recommend LC or with visit our factory.
Q: How to ensure that I received the machine undamaged?
A: First , we package is standard for shipping,then send you the photo when give the product to the freight forwarder. before pick up , please confirm product undamage, if damage, The ship company will take the responsibility.
Q: What aftersales service or any question about products?
A: This machine enjoys 1 years warranty , any problem , I am on line from 9 am to 12 pm, or you can send me mail , will reply you within 12 hours , or call me directly , I’ll give you detail instruction.

Guide to Drive Shafts and U-Joints

If you’re concerned about the performance of your car’s driveshaft, you’re not alone. Many car owners are unaware of the warning signs of a failed driveshaft, but knowing what to look for can help you avoid costly repairs. Here is a brief guide on drive shafts, U-joints and maintenance intervals. Listed below are key points to consider before replacing a vehicle driveshaft.

Symptoms of Driveshaft Failure

Identifying a faulty driveshaft is easy if you’ve ever heard a strange noise from under your car. These sounds are caused by worn U-joints and bearings supporting the drive shaft. When they fail, the drive shafts stop rotating properly, creating a clanking or squeaking sound. When this happens, you may hear noise from the side of the steering wheel or floor.
In addition to noise, a faulty driveshaft can cause your car to swerve in tight corners. It can also lead to suspended bindings that limit overall control. Therefore, you should have these symptoms checked by a mechanic as soon as you notice them. If you notice any of the symptoms above, your next step should be to tow your vehicle to a mechanic. To avoid extra trouble, make sure you’ve taken precautions by checking your car’s oil level.
In addition to these symptoms, you should also look for any noise from the drive shaft. The first thing to look for is the squeak. This was caused by severe damage to the U-joint attached to the drive shaft. In addition to noise, you should also look for rust on the bearing cap seals. In extreme cases, your car can even shudder when accelerating.
Vibration while driving can be an early warning sign of a driveshaft failure. Vibration can be due to worn bushings, stuck sliding yokes, or even springs or bent yokes. Excessive torque can be caused by a worn center bearing or a damaged U-joint. The vehicle may make unusual noises in the chassis system.
If you notice these signs, it’s time to take your car to a mechanic. You should check regularly, especially heavy vehicles. If you’re not sure what’s causing the noise, check your car’s transmission, engine, and rear differential. If you suspect that a driveshaft needs to be replaced, a certified mechanic can replace the driveshaft in your car.

Drive shaft type

Driveshafts are used in many different types of vehicles. These include four-wheel drive, front-engine rear-wheel drive, motorcycles and boats. Each type of drive shaft has its own purpose. Below is an overview of the 3 most common types of drive shafts:
The driveshaft is a circular, elongated shaft that transmits torque from the engine to the wheels. Drive shafts often contain many joints to compensate for changes in length or angle. Some drive shafts also include connecting shafts and internal constant velocity joints. Some also include torsional dampers, spline joints, and even prismatic joints. The most important thing about the driveshaft is that it plays a vital role in transmitting torque from the engine to the wheels.
The drive shaft needs to be both light and strong to move torque. While steel is the most commonly used material for automotive driveshafts, other materials such as aluminum, composites, and carbon fiber are also commonly used. It all depends on the purpose and size of the vehicle. Precision Manufacturing is a good source for OEM products and OEM driveshafts. So when you’re looking for a new driveshaft, keep these factors in mind when buying.
Cardan joints are another common drive shaft. A universal joint, also known as a U-joint, is a flexible coupling that allows 1 shaft to drive the other at an angle. This type of drive shaft allows power to be transmitted while the angle of the other shaft is constantly changing. While a gimbal is a good option, it’s not a perfect solution for all applications.
CZPT, Inc. has state-of-the-art machinery to service all types of drive shafts, from small cars to race cars. They serve a variety of needs, including racing, industry and agriculture. Whether you need a new drive shaft or a simple adjustment, the staff at CZPT can meet all your needs. You’ll be back on the road soon!

U-joint

If your car yoke or u-joint shows signs of wear, it’s time to replace them. The easiest way to replace them is to follow the steps below. Use a large flathead screwdriver to test. If you feel any movement, the U-joint is faulty. Also, inspect the bearing caps for damage or rust. If you can’t find the u-joint wrench, try checking with a flashlight.
When inspecting U-joints, make sure they are properly lubricated and lubricated. If the joint is dry or poorly lubricated, it can quickly fail and cause your car to squeak while driving. Another sign that a joint is about to fail is a sudden, excessive whine. Check your u-joints every year or so to make sure they are in proper working order.
Whether your u-joint is sealed or lubricated will depend on the make and model of your vehicle. When your vehicle is off-road, you need to install lubricable U-joints for durability and longevity. A new driveshaft or derailleur will cost more than a U-joint. Also, if you don’t have a good understanding of how to replace them, you may need to do some transmission work on your vehicle.
When replacing the U-joint on the drive shaft, be sure to choose an OEM replacement whenever possible. While you can easily repair or replace the original head, if the u-joint is not lubricated, you may need to replace it. A damaged gimbal joint can cause problems with your car’s transmission or other critical components. Replacing your car’s U-joint early can ensure its long-term performance.
Another option is to use 2 CV joints on the drive shaft. Using multiple CV joints on the drive shaft helps you in situations where alignment is difficult or operating angles do not match. This type of driveshaft joint is more expensive and complex than a U-joint. The disadvantages of using multiple CV joints are additional length, weight, and reduced operating angle. There are many reasons to use a U-joint on a drive shaft.

maintenance interval

Checking U-joints and slip joints is a critical part of routine maintenance. Most vehicles are equipped with lube fittings on the driveshaft slip joint, which should be checked and lubricated at every oil change. CZPT technicians are well-versed in axles and can easily identify a bad U-joint based on the sound of acceleration or shifting. If not repaired properly, the drive shaft can fall off, requiring expensive repairs.
Oil filters and oil changes are other parts of a vehicle’s mechanical system. To prevent rust, the oil in these parts must be replaced. The same goes for transmission. Your vehicle’s driveshaft should be inspected at least every 60,000 miles. The vehicle’s transmission and clutch should also be checked for wear. Other components that should be checked include PCV valves, oil lines and connections, spark plugs, tire bearings, steering gearboxes and brakes.
If your vehicle has a manual transmission, it is best to have it serviced by CZPT’s East Lexington experts. These services should be performed every 2 to 4 years or every 24,000 miles. For best results, refer to the owner’s manual for recommended maintenance intervals. CZPT technicians are experienced in axles and differentials. Regular maintenance of your drivetrain will keep it in good working order.

This entry was posted in Product Catalog and tagged automatic machine, automatic sealing machine, china machine, custom machine, design machine, facial tissue machine, machine, machine automatic, machine paper machine, sealing machine automatic, tissue machine, tissue paper machine on June 28, 2022 by ep.

China manufacturer Full Automatic High Speed 12000bph OPP Hot Glue Labelling Machine- Linear Labeler Sticker Machine near me manufacturer

Product Description

Comapny Introduct

Located in HangZhou City of HangZhou, the Yangtze River Delta, our company has 50million RMB fixed assets, covers an area of 30,000 square meters, with a more than 30 professionals team to design and develop, is a key professional enterprise, which integrates development, research, design, manufacture, technology service and marketing, to manufacture complete sets of wine, beverage and sticky filling equipments.
We are adhering to the principle of “market-oriented, quality as the main line, service as the guarantee and repute as the basis”. HY-Filling follows ISO9001:2000 international quality management system, it has established and improved the quality assurance system to ensure the quality and performance of the company’s products. The Development department of HY-Filling, with advanced technologies, has more than 30 full-time design and development engineers. HY-Filling’s technologies mainly sources from Italy, France, Germany, Switzerland and Japan; furthermore, a set of liquid filling production line with advanced technology and high starting-point has been developed combined with China’s basic conditions, its high automation level achieved the 1 in late nineties. Department of After-sale Service of HY-Filling adheres to service goal of “Customers’ needs are urgent, customers’ requirements are important, customers’ satisfaction is the aim”, provides the services of equipment installation guidance, products testing, maintenance and spare-parts supplying, consultation, complaints, regular visit every 24 hours.
HY-Filling has a network of customers for the complete set of beverage bottling lines more than 500 which spreads 30 more domestic provinces, municipalities, autonomous regions and the United States, Britain, Japan, the Middle East, Southeast Asia, Africa, Russia, CIS, South Africa etc. Besides the production and sale of equipments, HY-Filling provides various technical services to help users design equipment layout, answer users’ consultation, train users’ staff and provide practical operation guidance.
Certification

Standardized workshop of total 30,000 square meters.

With a more than 30 professionals team to design and develop, is a key professional enterprise, which integrates development, research, design, manufacture, technology service and marketing.

HY-Filling follows ISO9001:2000, CE Certificate , SGS , COC , TUV international quality management system.

The equipment will be tested and run for 24 hours before leaving the factory, to ensure the smooth working of water pipeline, and pneumatic, electrical and mechnical stability.

Professional installation team who are seasoned technician, Provide equipment quality installation services.

Product Description:

I.General description

This machine is designed for labeling square, circular or circular containers.

The control system uses Schneider PLC, with large liquid crystal display man-machine interface, making the operation simple.

The servo motor controls out of the mark.

This machine is made of SUS304 stainless steel and aluminum alloy and conforms to GMP standard.

The labeling speed and the delivery speed are synchronized.

Standard parting wheel is used for bottles with better roundness and labeling speed below 80 bottles per minute.

The splitter screw is used for labeling more than 80 bottles per minute and for unstable standing bottles.

II.Application

Applicable label: adhesive label, adhesive film, electronic regulatory code, bar code, etc. 2, applicable products: products with label on bottleneck, side plane, side big arc surface, circumferential surface. Apply to flat bottles, round bottles, square bottles on 1 side and 2 sides, such as shampoo flask, lubricating oil bottle, hand sanitizer, etc. Application industry: widely used in cosmetics, daily chemical, electronics, medicine, hardware, plastics and other industries. 4. Application examples: shampoo bottle label, lube bottle label, shampoo round bottle label, etc.

operational principle

1. Core working principle: the sensor detects the product passing through, sends back the signal to the label control system, controls to send out the label in the proper position control system and affixes to the product to be affixed to the label position, the product flows through the relabel device, The label is attached to the product and a label attachment action is completed.
2, operating process: release product (pipeline)-> product delivery-> product separation-> labeling (automatic implementation of equipment)-> collect labeled products.

III.Parameters

Model ROY

Driving type Servo drive

Labeling accuracy ±1.0 mm

Labeling speed (bottle / min) 20-80

Label speed (m / min) ≤38

Label type Adhesive, transparent or opaque label

Label height A/10-120MM C/10-180MM D/10-220MM

Label length 10-300mm

IV.Main electrical appliance configuration

Name Brand place of production

PLC Siemens Germany

Frequency transformer Siemens Germany

Servo drivers Siemens Germany

Touch screen Siemens Germany

Sensor
Panasonnic Japan

Switching Mode Power Supply Schneider France

AC contactor Schneider France

DC 24V relay Schneider France

Different parts of the drive shaft

The driveshaft is the flexible rod that transmits torque between the transmission and the differential. The term drive shaft may also refer to a cardan shaft, a transmission shaft or a propeller shaft. Parts of the drive shaft are varied and include:
The driveshaft is a flexible rod that transmits torque from the transmission to the differential
When the driveshaft in your car starts to fail, you should seek professional help as soon as possible to fix the problem. A damaged driveshaft can often be heard. This noise sounds like “tak tak” and is usually more pronounced during sharp turns. However, if you can’t hear the noise while driving, you can check the condition of the car yourself.
The drive shaft is an important part of the automobile transmission system. It transfers torque from the transmission to the differential, which then transfers it to the wheels. The system is complex, but still critical to the proper functioning of the car. It is the flexible rod that connects all other parts of the drivetrain. The driveshaft is the most important part of the drivetrain, and understanding its function will make it easier for you to properly maintain your car.
Driveshafts are used in different vehicles, including front-wheel drive, four-wheel drive, and front-engine rear-wheel drive. Drive shafts are also used in motorcycles, locomotives and ships. Common front-engine, rear-wheel drive vehicle configurations are shown below. The type of tube used depends on the size, speed and strength of the drive shaft.
The output shaft is also supported by the output link, which has 2 identical supports. The upper part of the drive module supports a large tapered roller bearing, while the opposite flange end is supported by a parallel roller bearing. This ensures that the torque transfer between the differentials is efficient. If you want to learn more about car differentials, read this article.

It is also known as cardan shaft, propeller shaft or drive shaft

A propshaft or propshaft is a mechanical component that transmits rotation or torque from an engine or transmission to the front or rear wheels of a vehicle. Because the axes are not directly connected to each other, it must allow relative motion. Because of its role in propelling the vehicle, it is important to understand the components of the driveshaft. Here are some common types.
Isokinetic Joint: This type of joint guarantees that the output speed is the same as the input speed. To achieve this, it must be mounted back-to-back on a plane that bisects the drive angle. Then mount the 2 gimbal joints back-to-back and adjust their relative positions so that the velocity changes at 1 joint are offset by the other joint.
Driveshaft: The driveshaft is the transverse shaft that transmits power to the front wheels. Driveshaft: The driveshaft connects the rear differential to the transmission. The shaft is part of a drive shaft assembly that includes a drive shaft, a slip joint, and a universal joint. This shaft provides rotational torque to the drive shaft.
Dual Cardan Joints: This type of driveshaft uses 2 cardan joints mounted back-to-back. The center yoke replaces the intermediate shaft. For the duplex universal joint to work properly, the angle between the input shaft and the output shaft must be equal. Once aligned, the 2 axes will operate as CV joints. An improved version of the dual gimbal is the Thompson coupling, which offers slightly more efficiency at the cost of added complexity.

It transmits torque at different angles between driveline components

A vehicle’s driveline consists of various components that transmit power from the engine to the wheels. This includes axles, propshafts, CV joints and differentials. Together, these components transmit torque at different angles between driveline components. A car’s powertrain can only function properly if all its components work in harmony. Without these components, power from the engine would stop at the transmission, which is not the case with a car.
The CV driveshaft design provides smoother operation at higher operating angles and extends differential and transfer case life. The assembly’s central pivot point intersects the joint angle and transmits smooth rotational power and surface speed through the drivetrain. In some cases, the C.V. “U” connector. Drive shafts are not the best choice because the joint angles of the “U” joints are often substantially unequal and can cause torsional vibration.
Driveshafts also have different names, including driveshafts. A car’s driveshaft transfers torque from the transmission to the differential, which is then distributed to other driveline components. A power take-off (PTO) shaft is similar to a prop shaft. They transmit mechanical power to connected components. They are critical to the performance of any car. If any of these components are damaged, the entire drivetrain will not function properly.
A car’s powertrain can be complex and difficult to maintain. Adding vibration to the drivetrain can cause premature wear and shorten overall life. This driveshaft tip focuses on driveshaft assembly, operation, and maintenance, and how to troubleshoot any problems that may arise. Adding proper solutions to pain points can extend the life of the driveshaft. If you’re in the market for a new or used car, be sure to read this article.

it consists of several parts

“It consists of several parts” is 1 of 7 small prints. This word consists of 10 letters and is 1 of the hardest words to say. However, it can be explained simply by comparing it to a cow’s kidney. The cocoa bean has several parts, and the inside of the cocoa bean before bursting has distinct lines. This article will discuss the different parts of the cocoa bean and provide a fun way to learn more about the word.

Replacement is expensive

Replacing a car’s driveshaft can be an expensive affair, and it’s not the only part that needs servicing. A damaged drive shaft can also cause other problems. This is why getting estimates from different repair shops is essential. Often, a simple repair is cheaper than replacing the entire unit. Listed below are some tips for saving money when replacing a driveshaft. Listed below are some of the costs associated with repairs:
First, learn how to determine if your vehicle needs a driveshaft replacement. Damaged driveshaft components can cause intermittent or lack of power. Additionally, improperly installed or assembled driveshaft components can cause problems with the daily operation of the car. Whenever you suspect that your car needs a driveshaft repair, seek professional advice. A professional mechanic will have the knowledge and experience needed to properly solve the problem.
Second, know which parts need servicing. Check the u-joint bushing. They should be free of crumbs and not cracked. Also, check the center support bearing. If this part is damaged, the entire drive shaft needs to be replaced. Finally, know which parts to replace. The maintenance cost of the drive shaft is significantly lower than the maintenance cost. Finally, determine if the repaired driveshaft is suitable for your vehicle.
If you suspect your driveshaft needs service, make an appointment with a repair shop as soon as possible. If you are experiencing vibration and rough riding, driveshaft repairs may be the best way to prevent costly repairs in the future. Also, if your car is experiencing unusual noise and vibration, a driveshaft repair may be a quick and easy solution. If you don’t know how to diagnose a problem with your car, you can take it to a mechanic for an appointment and a quote.

This entry was posted in Product Catalog and tagged automatic machine, china machine, glue machine, machine, machine automatic, machine china manufacturer, machine manufacturer on June 28, 2022 by ep.

China factory High Production Automatic Filling Overflow Liquid Bottle Filling and Capping Machine with Good quality

Product Description

High production automatic filling overflow liquid bottle filling and capping machine

Product Introduction of High production automatic filling overflow liquid bottle filling and capping machine :

This machine adopt PLC touch screen Siemens control, adopt through control filling time to reach different volume filling. It’s adopt gravity filling form. The filling nozzle material tank and touches liquid part material is SUSU304 Teflon and POM.And it have proteation device that machine will stop and alarm when lack of materials. And most important there is non-drip filling phenomenon because of anti-drip device.

Application:
The materil with lower viscosity, mouth wash, glassy water, water, toliet cleaner, diswashing liquid, liquid soap, detergent,solvents, alcohol, specialty chemicals, paint, inks, corrosive chemicals i.e. acids and bleach ect.

Main parameter

Filling head 12 heads Voltage 220V

Speed ≤3000BPH (base on 1L) Power 2kw

Filling volume 100-1000ml metering error ≤±3‰

Container minimum diameter 50mm Air Comsumption 0.9m3/min

Working Pressure 0.6Mpa-0.7Mpa Dimension 2440mm × 1480mm× 2610mm

Main Features

1) PLC programmable control, with touch screen man-machine interface system .
2) Automatic feeding, automatic filling, automatic out bottle after filling .
3) Adopting advanced world famous brand components in pneumatic parts, electric parts and operation parts.
4) Stable and reliable operation, high production efficiency, strong adaptability.
5) Filling volume adjustable, each filling nozzle could be single use, you can stop any filling nozzle at any time .

Application of High production automatic filling overflow liquid bottle filling and capping machine :

Filling valve :

Filling valve adopts imported brand, filling precision is very high and more stable, no leakage.

Filling nozzle:

Adopt 316 high quality stainless steel material . Filling nozzle size according to bottle volume and mouth to make . Can be dive filling .

Material hopper:

The whole machine body adopt 304 stainless steel and slope design is adopted in the material box design .It is convenient for customers to change varieties, easy to clean, comply with the requirements of GMP.

Filling system:

Filling nozzle adopt bottle mouth diameter custom made , it adopt dive filling to make sure the filling material won’t have bubble.

Touch screen:
All control by touch screen .Include the filling volume , filling speed .

More detailed pictures for your reference:

Packaging & Shipping

Our Services

Installation service

When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.

The sample service

1.We can send you the video of the running machine.

2.You are welcome to come to visit our factory,and see the machine running.

Customized service

1.We can design the machines according your requirements(materil,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.

After-sales service

1.We will delivery the machine and provide the bill of load on time to make sure you can get the machine quickly

2.When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.

3. We often ask feedback and offer help to our customer whose machine have been used in their factory for some time.

4.We provide one year warranty

5.Well-trained & experienced staff are to answer all your inquiries in English and Chinese

6 .24 hours for engineer response (all services part 5days in customer hand by Intl’ courier).

7 .12 Months guarantee and life-long technical support.

8.Your business relationship with us will be confidential to any third party.

9. Good after-sale service offered, please get back to us if you got any questions.

Quality Control

We have the single quality department,that make sure the material of the raw materials is good,and ensure the machine running smoothly.

FAQ

Q: Are you trading company or manufacturer ?
A:We are factor lie in ZheJiang province, all machine is made by ourself and we can provide customize service according to your requirement.

Q: How can I ensure that I get High production automatic filling overflow liquid bottle filling and capping machine ?
A:As a manufacturer, we have a strict supervision and control of every manufacturing step from raw materials purchasing, brands choosing to parts processing, assembling and testing.

Q: My material viscosity is very high , how can you fix it ?

A: For some material we can make heating and mixing hopper to make the material can flow. And according to material viscosity to decide to use piston pump filling.

Q: How can I install my machine when it arrives?
A: The standard machine we will adjust it before shipping, when you get it you can directly use it . If you have other size bottle need change mold, we will send you video of how to adjust it. Also, we can offer over sea technical service to come your factory install machine.

Q:What about your warranty?
A:Our warranty is 1 year, all machine part can be replaced for free within 1year if broken(not including man made).And offer lifetime after sale service

Q:What’s the payment terms?
A:T/T,30% deposit and 70% balance before delivery.

Q:How about the spare parts

A: After we deal down all the things, we will offer you a spare parts list for your reference.

Drive shaft type

The driveshaft transfers torque from the engine to the wheels and is responsible for the smooth running of the vehicle. Its design had to compensate for differences in length and angle. It must also ensure perfect synchronization between its joints. The drive shaft should be made of high-grade materials to achieve the best balance of stiffness and elasticity. There are 3 main types of drive shafts. These include: end yokes, tube yokes and tapered shafts.

tube yoke

Tube yokes are shaft assemblies that use metallic materials as the main structural component. The yoke includes a uniform, substantially uniform wall thickness, a first end and an axially extending second end. The first diameter of the drive shaft is greater than the second diameter, and the yoke further includes a pair of opposing lugs extending from the second end. These lugs have holes at the ends for attaching the axle to the vehicle.
By retrofitting the driveshaft tube end into a tube fork with seat. This valve seat transmits torque to the driveshaft tube. The fillet weld 28 enhances the torque transfer capability of the tube yoke. The yoke is usually made of aluminum alloy or metal material. It is also used to connect the drive shaft to the yoke. Various designs are possible.
The QU40866 tube yoke is used with an external snap ring type universal joint. It has a cup diameter of 1-3/16″ and an overall width of 4½”. U-bolt kits are another option. It has threaded legs and locks to help secure the yoke to the drive shaft. Some performance cars and off-road vehicles use U-bolts. Yokes must be machined to accept U-bolts, and U-bolt kits are often the preferred accessory.
The end yoke is the mechanical part that connects the drive shaft to the stub shaft. These yokes are usually designed for specific drivetrain components and can be customized to your needs. Pat’s drivetrain offers OEM replacement and custom flanged yokes.
If your tractor uses PTO components, the cross and bearing kit is the perfect tool to make the connection. Additionally, cross and bearing kits help you match the correct yoke to the shaft. When choosing a yoke, be sure to measure the outside diameter of the U-joint cap and the inside diameter of the yoke ears. After taking the measurements, consult the cross and bearing identification drawings to make sure they match.
While tube yokes are usually easy to replace, the best results come from a qualified machine shop. Dedicated driveshaft specialists can assemble and balance finished driveshafts. If you are unsure of a particular aspect, please refer to the TM3000 Driveshaft and Cardan Joint Service Manual for more information. You can also consult an excerpt from the TSB3510 manual for information on angle, vibration and runout.
The sliding fork is another important part of the drive shaft. It can bend over rough terrain, allowing the U-joint to keep spinning in tougher conditions. If the slip yoke fails, you will not be able to drive and will clang. You need to replace it as soon as possible to avoid any dangerous driving conditions. So if you notice any dings, be sure to check the yoke.
If you detect any vibrations, the drivetrain may need adjustment. It’s a simple process. First, rotate the driveshaft until you find the correct alignment between the tube yoke and the sliding yoke of the rear differential. If there is no noticeable vibration, you can wait for a while to resolve the problem. Keep in mind that it may be convenient to postpone repairs temporarily, but it may cause bigger problems later.

end yoke

If your driveshaft requires a new end yoke, CZPT has several drivetrain options. Our automotive end yoke inventory includes keyed and non-keyed options. If you need tapered or straight holes, we can also make them for you.
A U-bolt is an industrial fastener that has U-shaped threads on its legs. They are often used to join 2 heads back to back. These are convenient options to help keep drivetrain components in place when driving over rough terrain, and are generally compatible with a variety of models. U-bolts require a specially machined yoke to accept them, so be sure to order the correct size.
The sliding fork helps transfer power from the transfer case to the driveshaft. They slide in and out of the transfer case, allowing the u-joint to rotate. Sliding yokes or “slips” can be purchased separately. Whether you need a new 1 or just a few components to upgrade your driveshaft, 4 CZPT Parts will have the parts you need to repair your vehicle.
The end yoke is a necessary part of the drive shaft. It connects the drive train and the mating flange. They are also used in auxiliary power equipment. CZPT’s drivetrains are stocked with a variety of flanged yokes for OEM applications and custom builds. You can also find flanged yokes for constant velocity joints in our extensive inventory. If you don’t want to modify your existing drivetrain, we can even make a custom yoke for you.

This entry was posted in Product Catalog and tagged automatic filling machine, automatic machine, bottle capping machine, bottle filling machine, china bottle filling machine, china machine, filling and capping machine, filling machine, filling machine automatic, filling machine liquid, liquid filling machine, machine, machine automatic, machine production on June 28, 2022 by ep.

Post navigation

← Older posts

Newer posts →

Model	KIS-1800-4
Production capacity	3200-4000 cans/h, can be customized
Filling range	5~300ml (can be customized)
Filling accuracy	<±1.5%
Power	3N 380V/ single phase 220V, 50/60Hz
Power	2Kw
Air consumption	1.5 m^з/min
Dimension	2000mmX1800mmX1750mm
Weight	550Kg

	About Chunlai Packing Machinery
	Chunlai is a reputed manufacturer for different kinds of automatic filling & sealing packaging machines. For more than 10 years, Chunlai supplys packaging machines that fully meet customer’s requirements.
	No matter your product is solid, liquid, paste, powder or granule, Chunlai has machine meet your packaging requirement. Chunlai offer packaging machines for rice packing, seafood packing, beverage packing, dairy packing, soybean product packing, snack food packing, fast food packing, daily product packing, cosmetic product packing, etc..
	Chunlai provides a comprehensive experienced technical service. This ensures you the high quality production, secure sealing finish, ease operation and minimum maintenance.
	Each machine is carefully inspected and tested by our highly experienced staff before shipment.

Filling for liquid ,paste,granule,powder,and so on. Sealing for cup,bottle,bowl,tray,can,jar,bucket etc…
yogurt /Milk/Chocolate Filling Sealing Machine	Water Filling Sealing Machine	Juice Filling Sealing Machine
Jelly/Pudding Filling Sealing Machine	Jam Filling Sealing Machine	Sauce Filling Sealing Machine
Instant Noodles Sealing Machine	Dumpling/Beancurd Sealing Machine	Coffee Filling Sealing Machine
Dinner box Sealing Machine	Frozen Food/MAP Packaging Machine	Potato Chips Canister Sealing Machine
Porridge Filling Sealing Machine	Plastic Jar Sealing Machine	Plastic Bucket Sealing Machine
Wetb Wipe Can Sealing Machine	Dehumidifier Box Filling Sealing Machine	Cosmetic/Detergent Filling Sealing Machine

Packaging	Shipping
First Rust inhibitor;	First contact you the machine is ok.
Second Wrap film;	Second put the freight come and take the machine.
Third Plywood cases;	Receiving.
Last in container.	Accept!

Model	ROY
Driving type	Servo drive
Labeling accuracy	±1.0 mm
Labeling speed (bottle / min)	20-80
Label speed (m / min)	≤38
Label type	Adhesive, transparent or opaque label
Label height	A/10-120MM C/10-180MM D/10-220MM
Label length	10-300mm

Name	Brand	place of production
PLC	Siemens	Germany
Frequency transformer	Siemens	Germany
Servo drivers	Siemens	Germany
Touch screen	Siemens	Germany
Sensor	Panasonnic	Japan
Switching Mode Power Supply	Schneider	France
AC contactor	Schneider	France
DC 24V relay	Schneider	France

Filling head	12 heads	Voltage	220V
Speed	≤3000BPH (base on 1L)	Power	2kw
Filling volume	100-1000ml	metering error	≤±3‰
Container minimum diameter	50mm	Air Comsumption	0.9m3/min
Working Pressure	0.6Mpa-0.7Mpa	Dimension	2440mm × 1480mm× 2610mm